Dry Rot Deck Repairs/How to Remove Wood Rot Made Easy?

VideoJoeKnows
61 followers
@VideoJoeKnows
#howtoremovewoodrot
#woodrot
#woodrotremoval
#dryrot
#dryrotremoval
#woodrotdeck
#dryrotdeck
#howtouseasawzall
#howtooperateasawzall
#howtousesawzall
Dry rot deck repairs/how to remove wood rot made easy is what this DIY howto video is about. VideoJoe is right in the middle of removing some deck wood rot & he is just happening to be using a sawzall in order to remove the wood rot wall ledger. Is it really that easy to remove wood rot? Sometimes it's easy & other times is a bit harder to remove wood rot but stick with it & you'll get it. Watch & learn as VideoJoeShows you what VideoJoeKnows...dry rot deck repairs/how to remove wood rot made easy? Nice!
https://www.youtube.com/user/VideoJoeKnows
Straighten out my blade as I try to get to the very tip, and it's hitting the stucco in the back,
but you just have to keep working. Now I can work from the bottom up.
Now let's see if I can split it. Let's see if I can split it. Oh, I almost had it.
Now I can see I didn't cut through the the block all the way, so I'll work on that a little bit
Got this block split. The bolt is above the rest of the block by about a half an inch.
Split off a little bit more. Now let's see if I can wedge that off.
There's the lag.
Boy, that lag, they didn't even use a long enough one. That's only three inches long,
so you've got the 2x4, which is an inch and a half. You got the stucco, which is another
five-eighths of an inch or so. Then you got the OSB, which is another half inch or five-eighths.
There's your three inches, right? Before this goes even into the wood behind that,
they didn't use long enough flags. I can see that right now. I'm surprised it held up there.
And I'm glad I'm deciding to take this off. When I put new flags in,
see, I've got to make sure to put them in long enough. I think this one's still, I don't know,
seems like it's still hitting or connected. Maybe not. Yep, probably, probably.
Saw's all again. I go almost out of it. There, right at the last bit of my blade again.
My blade's getting hot. You don't want to touch that. It's melting. I hold it there. It's melting
the tar. And once it starts getting hot like that, chances are this blade is toast. It's probably
pretty dull because I've been trying to cut from the tip down to about there to try to keep it off
the stucco. And I can't help hitting the stucco once in a while. And that dulls your blade out.
So if you got a Sawzall, make sure you don't just have one blade or a couple blades.
You want to have a few different ones. I even got them for metal cutting,
like a hacksaw blade type. There. Voila. I'll go down there and bend the nails and stuff.
When I get done, I'll show you what the, what the stucco here looks like. I'm not really
too concerned about the bottom over here. I'm going to put a new ledger up
there. And this is all going to be underneath the deck. Actually, I'll, I'll have to cut this back
and clean it up and stuff. First things first, right? I'm going to keep working on this, this
two by six. Oh, before I do that, I told you I would show you my other Sawzall. That's right
here. Now, see, I have extra blades. See that long one? I told you I had a long one,
but it's not really that sharp. So that's why I didn't use it.
And then they, then they have blades. These are probably five, five, six inches long,
but they have some that are about nine inches, then they have some longer.
Had I had the next size up, that would be just about right. Yeah, those are six, but here's my
other one that I use, and you can see it's got a cord on it, and it's their little, the little
thing right here. You push on it and put the blade in right there and let go. Make sure it gets
hooked all the way. See there? That's ready to go. Look at that. Or you can flip it the other way.
And that would happen to come with a carrying case and give me, give me a couple extra blades
that I have in there. I'll keep those like for if I need them, but right now I'm going to keep
cutting. I think I'm going to change this, this blade. It's all dull on the tip, and the last time,
I don't know if you saw me underneath the house, I used this blade and I was cutting the back side
of some OSB plywood right down over here. You need to watch that, and there was, there was
stucco on the outside of it, and I couldn't cut through the stucco. See, see the blade? Look at
the teeth. Teeth used to be nice and sharp like this over here. Now look over there.
I just wore them right on down, but I'm not going to throw that blade away.
If I ever did some demos, some sheetrock demo or something, I could use this blade for that,
can't I? I don't need a brand new blade for a sheetrock demo. Just jam that into the wall,
and away you go. Start cutting your, your sheetrock. So now both of those are dull,
and I happen to have another one. Oh, that one looks brand spanking new.
One, here's the one for cutting metal. This is a big fat tooth one right there. That,
that could do some damage. I don't know, I might want to save that for another time
and use this in one. Maybe I should save that. I don't know. Let's see what I have.
See, that's the one that came with it. Those teeth are closer together,
yet, so I don't think I'm going to use that one. I think I'll, I'll, I'll use, I'll use this one,
and I just have to be careful with it, and eventually I won't be able to use the tip.
But if I'm cutting something else, and I'm cutting it straight, I could still cut from here to there,
let's say later on. Okay, I'll pull this out, hook it in there, pull on it,
and I'm ready to rock and roll. That's all I got for this time, but I'll be back with more videos.
