@VideoJoeKnows #howtoremovestucco #removingstucco #howtodemostucco #deckrepair #dryrot #woodrot #dryrotdeck #woodrotdeck #howtoremovedryrot #howtoremovewoodrot How to remove stucco/dry rot deck repairs made easy/DIY for beginners is what this DIY howto video is about. VideoJoe is removing some stucco in order to install a deck ledger board. This stucco happens to be under the deck area & will never be exposed per se but VideoJoe still wants to remove the stucco since he has encountered some dry rot areas that need to be removed. Does VideoJoe need to use a saw & masonry blade to cut a straight line in order to remove the stucco? No. Watch & learn as VideoJoeShows you what VideoJoeKnows...how to remove stucco/dry rot deck repairs made easy/DIY for beginners. Nice! https://www.youtube.com/user/VideoJoeShows
Now let's say we want to get this wire off. There's a few staples in here, but we can get
that off of the staple, maybe, maybe not. Let's get the staple off that way, and I
wanted to show you how I'm going to pull this chicken wire off. I just have my
cutters, my electrical cutters, let me get this staple out of here, just grab that and pull up on it,
fold that down like that, I'm just going to take these, and you just start, you just start
cutting, and pull this up, get it up to the next one, get it up to the next one, get it up, guess
where, to the next one, okay, all the way along here, and that's how I'm going to do this whole thing. That
didn't take very long. I don't have a long, that long of a wall, and just little by little, and this
line is pretty straight. My two by six I know is only going to be five and a half inches, just leave
that like that. Here's another staple, oh, that one came off. I have a staple here, and I can just use
this, grab it and lift up, grab it and lift up. Now see, this has paper on it, it just got
saturated on here with the plywood, see, it's black, and they put that down first before the chicken
wire, with the theory that if you ever get a leak through the stucco, it's going to hit that paper,
and the paper is going to, is going all the way down to your bottom of your, your stucco, where
you've got that trim, and the trim's got little holes in it, weep holes, and it comes out on the
of your house, onto a patio, whatever. It's also like a moisture, moisture type barrier. I mean,
I don't, I don't know if I'm going to scrape off all of this stuff, because eventually, what I told
you I would do, is once I get that, clean off this edge, and then, then I'm going to cut this with the
Sawzall. I'm just going to angle my blade, and I'm going to cut through just this, and, and I'll get it
almost all the way down to the two by six, or two by twelve, whatever that is, and I'll just have to
be careful, you know, because most of this, well, let's just see, let's just see it before I say
anything. I said some of this is already waterlogged, and look at that, you may not have to cut anything
at all. You shouldn't be able to do this, if this was not waterlogged. Okay, I just don't want to
start loosening up the stucco, you have to, but it's still, it's still nailed stucco with the chicken
wire underneath that. I just have to be kind of careful, because if I dig it in too far, I can
loosen this all up. It doesn't really matter now, because this is underneath the house, but once I
get, once I get done, see there's a staple right there, oh no, that's a nail. That was loose down
there even further, but I could, once I put the two by six in here, so I got plenty of room now,
doesn't have to be perfect. I got six, six and an eighth inches to the top of this two by twelve,
two by ten, whatever it is, and I only need five and a half inches. I got plenty underneath there,
and what I could do, like I say, I could, I could leave this edge just like this, because it's
underneath. If I want, I can, I could put some sort of exterior caulking, or I can put construction
adhesive right there, just to, just to kind of block that from any moisture going down in there.
It'll be underneath the deck, but I think I'll probably end up wanting to do something down
in there. I'm gonna have a little bit, whatever I do, I'm gonna have a little bit of the wood
showing once I get the two by six on there, but that's okay, because that's underneath, that's
underneath the house. It's gonna be no different, it's gonna be no different than seeing these two
by sixes underneath the house, right? I don't really care about that stucco anymore, okay? So
think of your projects, and for this particular project, most of the time, 99 out of 100 times,
well 95 out of 100 times, you're not gonna have any stucco down here, because somebody would have
built this all inclusive, all in one go, and then you wouldn't have any stucco underneath the house.
You don't have that. Crawl underneath your house, and see where you've got, see where you got stucco.
I crawl underneath this house, there's no stucco anywhere that I can see, because they just don't
do that, okay? So in this case, we have it, because they added this section of deck on last. They added
the stairs on. You follow me? Little by little, you're starting to understand this whole thing.
Most decks aren't gonna have this, other than ones that somebody said later on, hey, let's add,
extend our patio out for a landing, and put some stairs down to the side yard, down to the
backyard, whatever, okay? So I'm gonna just keep plugging away. I'm gonna just keep breaking this
stuff off, just like that. This might be a little bit tougher, this little section, you know, under
the ladder and stuff. This next section, because we're away from that corner, we're away from this
corner where most of the water damage was. We did get some water damage from here down, and chances
are, I'll be able to dig this out the same way, but I'm gonna be careful, and if I feel like it, I
have to score this, even halfway down, score it halfway down with a sawzall blade, or something. I
don't really want to use a skill saw there. If I did, I'd have to use an old blade, because I've
got different wires, and you have to make sure all your chicken wire edges are out. See,
I missed one little spot there from when I was cutting, and if I want to get that out,
get it out, and then there's a staple here. There'll be nails holding the chicken wire. Sometimes you
get staples, sometimes you get, you know, big staples from a staple gun, or you get hand staples from a
hammer tacker. You get all kinds of stuff in here when you start cutting, or actual nails holding up
the OSB plywood up against there, and you think, oh, I'll just run the saw in there, and be done with it. Now, all of a
sudden, you whack a nail, and you just messed up your brand-new blade, or something, or you've
got a carbide tip blade with the carbide tips, and you break one of your tips off. It breaks off,
because it hit a nail, and you're like, ah! Now your saw blade, you'll still be able to use
it for a while, but you're gonna have to get another blade. Sometimes blades aren't cheap.
They're, you know, they could be 15 bucks for a new blade, or even more, so all those types of things
you got to think about. I use a Sawzall blade, and I probably use a halfway dull one, or something,
knowing that I'm probably gonna hit something, or if that doesn't work, then I'll get a sharper blade,
and, you know, I'll just peck away at it. Okay, but in this case, maybe I won't have to. I'll just keep
working, and see what happens. I'm just gonna show you a little bit more of the stucco I'm taking off.
If I have just this much, if I beat on it straight, it's harder. It takes a while longer for it to
come off, and I found I just kind of use it, and cut it, get it at an angle. I can get a lot of it
off quicker than just smashing it straight on. The line, I can go up. See that? That's a nice straight line.
Boom!