Facebook: https://www.facebook.com/RicardoPontesArt/ Sculpting 101, Beginning sculpture, how to sculpt, how to sculpt from life, life sculpting,life drawing, drawing tutorial, portrait sculpture, how to sculpt portrait
All right guys today is going to be the start of a new sculpture. This is a armature that I built
really quickly to support some clay up here. There's many ways of building it but if you
do this it's basically just a series of these wires you can kind of loop around and it will
support your clay. So that means that the neck is going to be here and the reason you want to have
this type of armature is that you can move it around. This is my model and as far as right now
I'm just going to work with the head and I'm not going to worry too much about this but
what you're going to need first is a wire tool like this. Let's make a one inch cut
like this and we're simply just going to wrap it around our armature and we're going to be
kind of careful but we also just kind of want to join it at the end. So if I turn it this way
you see that the bag is kind of pinching so I'm just going to push it in and I'm just going to
join the the clay. So I'm going to take another slice of the clay and we're going to wrap it around
the bottom part kind of pushing it down. Usually I do like to use tools more but in this beginning
stage I just want to push this all the way down with my hands. It doesn't look like much. This is
clearly the profile. You can see the neck. This will come to the surface so this is going to be
the lower back. Sculpture to be ready to fire in a kiln you have to hollow it out so you can't
leave it full of clay. It can't be this dense because if it's this dense it'll just break in the kiln.
So one of the things you can do is kind of like establish where the kiln is going to be
and once you establish that you can kind of just make a sharp point. You can draw where things are
going to be so the chin. We're going to build the head this way and the back of the head it's going
to come out quite a bit. This you're going to have to push it in quite a bit and move it to the top
because a lot of this clay is going to be falling down so it's better to add more at the top.
What I like about this tool is that you can push it in quite a bit
and it creates a nice flat edge. A lot more to the neck.
Another really cool tool you can use is this aluminum scraper. If I put let's say I wanted to
make the skull wider I could put my clay down take this tool because it bends. You see like it's just
very flexible. You can make one out of a coke can. The middle right here is going to be where my eyes
are going to be. Where the eyes are and remember we're still kind of mimicking a skull but also
my model has got a very indigenous look to her. She has very high cheekbones so we can start
adding those shapes and also in my reference photo she is smiling so that means that
the muscles of the face are kind of brought up a little bit and using my tool. This is actually a
pretty decent tool for this. Supercelliary arch is right about here. We can start using our tool to
carefully go around and model some of these bones and actually this bar is going to be kind of
coming up a bit so we're going to push up this ridge and there's a very distinct ridge between
the front of the skull and the side of the skull. Her face needs to be just a little bit wider. She's
What they do is like if it's a female model they'll simply try to create it like female
right away but all of these little details are going to be coming towards the end. We just want
to shape it, kind of figure out where things are and all of this it's clay so you can move it
So what I'm doing now is just trying to work the major shapes without doing a lot of
details just creating the structure. Also keep in mind that lighting is important even for sculpture
but you can't really rely on the lighting in the beginning. Just think more in terms of anatomy. It's
more important to know anatomy than lighting. When you're a painter you rely a lot on
the lighting because that's what reveals the shapes but in sculpture anatomy
underneath the skin reveals the shape so just keep that in mind. Up here on hers it's really
pronounced it's the mental eminences and there's usually two and of course her head actually kind
of goes like this but on this there is a little bit more and what I do is I take just a little
bit of clay and I start putting it. Usually if I put a little bit too much it doesn't really matter
because I am missing quite a bit in the front of the skull. A little bit here in the mental
eminence then I'll take this tool and kind of just push it. That is what the whole modeling thing is.
This is a technique I learned actually kind of recently. Most of the time I did a lot of scraping
and I think scraping in a way is a little bit more difficult. So here look above most people's
and you'll see a bone. You can feel it on your own skull and that's the superciliary arch.
So generally Caucasian models, Caucasian female models will not have this very pronounced and
it's always like a play. Actually if you look at African models, male, this is a very pronounced
bone and usually with Caucasians you don't have this bone as pronounced. It's kind of interesting
when you see the differences between races because you know that is very distinct. So this
is the eyebrow ridge or the superciliary arch. I like to build it up slowly and we're not looking
for likeness. We're just looking to kind of build the structure. So this is the bone surrounding the
eye, the orbicularis oculi or the eye ridge. The bone kind of comes out and then if you pay
attention the temple actually comes out a little bit more. So we're going to add a little bit more
clay to the side here. Very thin, she's got a very thin face. Her jawline is surprisingly thick
so I'm adding clay here to kind of create a little bit more fullness and also in the temple
and also in the sides we're going to have to add a whole lot more clay and this is just from like
looking at the reference so you can tool and just try to smooth it and push it in at the same time.
Remember our masseter which is this right here we're gonna have to round it and make it a little
bit bigger and this is the usual way I do it like I'll add the clay and then I'll take my modeling
tool and try to create the roundness and push it in at the same time but you can see that I'm kind
of curving my modeling tool. I try and draw a line around the nose straight with my eyes you know
like this and I figure that my cheekbone here is actually like right about here so very wide
so I add the section I want here and then I'll take my tool and blend that into the existing
clay and shape everything else around it and I keep moving it. You should always be moving your
clay, moving your stand. This is why it's important to have a modeling stand that's very easy to move
around. If you only have a table you can get a lazy susan caster and it's a very cheap alternative
to a modeling a sculpture modeling stand. Keep in mind that when you are looking at the cheek
how far does the cheek come out as compared to the zygomatic arch and bone and on her
this zygomatic arch is wider than her jaw so right now it's kind of like a struggle it's just
we're trying to figure things out and we're trying to figure out where things are going to be added
so if I am going to make a decent sculpture, sculpture is all about drawing in 3d. What I'm
needs to kind of come up more so right up there and then I'll take my scraping tool
and I'll blend it in towards the back of the ear the zygomatic process of the ear
that there is a little bit of thing that we need to kind of keep in mind so that's her cheekbone
then there's her hairline and I think we have to bring that ear pretty far back and
it don't do a full ear what I like to do is just kind of indicate where things are
and if you use your tool she is kind of like leaning up a bit best thing about this clay
you can kind of move it and take a line from your ear and see where it goes since she's looking up
I'm actually seeing that their ear is further down generally the top of the ear is at the
eyebrow ridge on hers it is not but all of this could change it doesn't really matter so
usually the bottom of the ear is going to be at the bottom of her nose she's looking up so this
is going to be right about here so so but don't worry about details but a lot of artists actually
use the ear hole for measurements for reference for a life-size sculpture they'll take measurements
from here to here here to here here to here and that will help take some really good measurements
but I don't have the model in front of me it's a little bit harder to do it when you don't have
the model but push out the ear remember the ear doesn't really attach from this rear side to the
skull so now with this sign we could start giving her a little bit of an expression I think I'm
going to wait on it you can take your hands and kind of just put them side by side and kind of
feel the symmetry because you don't want to get carried away on one side and then neglect the
other I like to keep things if I do the ear on one side I'm going to do the ear on the other side
even if I don't finish for today it's always good to kind of just have the two things symmetrical
you guys can tell we are on our way even though it doesn't look like the model yet
hopefully we can change this hopefully we're gonna pull this off you know there's a lot of
things that you could do in portrait sculpture there's very different ways and if you listen
to various artists they'll give you a different way but there's really no right way and for me
it's always like a learning process I can't ever it takes me a really long time to really understand
things so but this is what I got so far the thing that you should not rush is that you got to build
an armature a good armature I've made mistakes before where I made an armature and it's just
kind of you're always fighting the armature it's always sinking so this armature even though it's
not perfect it will get you to the sculpture pretty quickly it's just four wires it looks
like an egg beater and then you just wrap it around a flange you can use a two by four to
bring it up and this could be for a bust or you can just leave it for the head you can see the
head is slightly undersized and I don't really like full-size sculptures too much and the reason
is they just require so much more clay so much more time and I kind of like to do sculptures
kind of fast so that's why I kind of like the undersized stuff make sure you have a very good
reference I took these photos myself of the model she's got a very unique look that I really like
so hopefully we can get this done but this is part one this is the first session and I'll be
hopefully doing this a little bit more if you like what you see just post up in the comments below and
let me know if I'm going the right way if I'm making any mistakes so I'll gladly try and take
care of those but I really appreciate you guys watching and I'm going to see you in the next
video of this series where we're going to start adding the mass of the skull and build it out
thanks for watching I will see you in the next video