Man Says He Can't Insulate Garage Door Then Does It Anyway

VideoJoeKnows
63 followers
2 Video Views·Feb 14, 2026
@VideoJoeKnows
Man says he can't insulate garage door then does it anyway is what this DIY howto video is about. VideoJoe is starting the process for installing some insulation panels to a garage door. One of the things he will have to do is cut the insulation batt panels in order to fit into his garage rollup door sections as not all garage door panels are created equal so a cutting he will go. Well...what is the best way to cut the insulation panels for your garage door? Well...there are a few different ways of which VideoJoe will be showing you. Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't insulate garage door then does it anyway. Nice!
https://www.youtube.com/user/VideoJoeKnows
Now remember I said I always flip this over because it's easier for me to cut it on the
back side well look look what they're doing here it looks like they've got the plastic facing up
as they're cutting and you could do it that you could do it that way too if you want
um it because because this is only two inches thick see as you push down you don't have much
if you had three three and a half inch thick insulation that you're cutting in a wall or
r19 insulation five and a half inches thick you wouldn't want to cut from the paper side
you see what I mean because then you have to push down through it you just score a couple
times with a sheetrock knife on on the other side as with the paper facing down and then just put
full force on your on your knife and and run it through this way you can't really you can't really
do that okay so that's that's one way to cut it they even said you can cut it with scissors
if you want and I got I've got two pairs of scissors here well actually I got regular scissors
I got uh regular scissors okay and I got some tin snips let's just see if you didn't have a
and I know I know this this piece is all kind of uh ratty kind of folded over on that side
and I know I'm going to be 18 and some odd okay from this edge and so I got a little bit I can
play with right over here let's just put a pencil mark so I don't I don't overdo it I'm going to put
just just to be on the safe side can this be cut with scissors look at that I guess you could
look I'm cutting through the whole thing well that's that's kind of odd well I'm going to
take my tin snips now and that's cutting too I can see yeah it's not cutting as nicely I can see
that I could I could possibly use the scissors and I and I don't know if I want to do that
well and I may I may just I don't know just yet because um when I flip it over to cut
um I I think it I think it could work if I flipped it over and measured and stuff I'm never going to
see on here my cut but uh on the on the you know if I put a straight edge on it and get myself
a couple marks on there I think I could do it that way too the last thing you know when you
cut this you just don't want to cut it too short because the last thing you want is to have the
vinyl you don't want the vinyl to be too short on your garage door that's why they give you
they give you one little piece one little piece here that you could you could cut some strips or
something if you got off one little place you could put this on there and kind of tape it on
there uh worst case scenario you're gonna have you're gonna have a little bit of extra of this
face cover when you trim that off you could my word you could use that too right and uh tape it
on that way with some shipping tape use use the clear the clear tape and you'll be fine doing it
that way too all right well I'm gonna get I'm gonna get set up with my plywood and stuff and
get ready to start cutting this insulation okay I'm getting ready to cut this am I ready to cut
no this drywall blade is really super dull the last thing you want to do is start cutting with
a dull drywall knife so I've got to replace this I can flip it around hopefully I've got a sharp
end on this side or I've got some extra ones in here you want a sharp knife okay don't forget
can you believe it I don't believe what I just saw look at that I broke that that fits in there
and that adjusts that so you can slide that in and out I was having a hard time getting it out
of there and I hadn't replaced the blade for a while and I think I think the tray bent a little
bit I tried to bend it back with a pair of pliers and I thought you know I hope I don't bend it too
much and I might I don't want to break it I don't think I'll break it and right after that I broke
it this thing is probably this has been with me probably for oh I don't know 35 years you don't
you know they don't they don't uh wear out if you take care of them but I've got it I've got it so
I can still cut with it I got to be careful with it because now when I put it in my in my bag I got
to remember that it's always going to be open and you know after this I'll have to go to the
store and break down and get another one I think I think I might actually have another one of these
upstairs but I'll have to I'll have to be careful with that now and incidentally they do sell these
at the store where this blade always sticks out lots of lots of drywallers like to use that because
they don't like to slide it back and forth because then after a while when they're cutting
drywall this might slide in a little bit or whatever and that's that's the people who
who use it not not so that you can retract it okay but for the every average Joe get the
retractable ones you'll be glad you did because every time I use this when I get done cutting
with it I retract it okay for safety before I put in my nail bag next time I need it slide it out
again back and forth I don't know how many times this thing has gone back and forth it's well
been worth it let me tell you now I've got to get another one well I just happen to have
uh some plywood that's about oh 50 what is it six five feet tall 60 inches and I've already checked
the edges I cut these down off of a big piece of plywood that I had for a countertop and uh
I wasn't going to use it anymore and instead of throwing this stuff away I thought I'll just
I'll just rip it for shelf material later on maybe I could use it uh up in the attic or
somewhere like that and and I know this piece here I've already eyeballed it this is my straight edge
right here on this side and so I can use this for my straight edge okay so that's that's probably
what I'll do for the straight edge I'm gonna set you up uh kind of over this direction and
I've got my I'm gonna make I'm gonna cut a few different ways okay this one here I know I've
got to cut this little strip off there okay I'm gonna flip it over like that and um
let's just see what I'm gonna do here actually maybe maybe I should get you
uh I think I'll get you situated over here
see now now I gotta move that light hey I do everything on the fly man
okay how's that can you still see that okay let's see yeah you can see that okay and so this piece
here I know if I measure over 18 and 3 8ths so see this edge is right on the plastic so
if I measure over 18 and 3 8ths and just put a mark in the in the insulation like that okay
18 and 3 8ths
that's about 18 and a half okay go like that and we'll get we'll get a mark down here at 18 and
3 8ths like that see okay those are my marks and um that's all I need for my straight edge now
now I put a straight edge down there and on this one here this one I'm going to be right on the
edge and this one I'm going to be all towards this way just a hair okay and see I'm not going
to see my line from the other side but but I think it's going to be fine okay let's just
let's just see how we do press it all the way down in there now man even with this I can see
that I might I might want to cut it on the front side after all you know I just might
going as good as I thought it would and see if I do it on the other side I'll be able to see
my front line and I can just do it right right from there I think and then go down
it might actually work better I used to always cut it like that
for fitting inside walls and things like that okay but on this stuff I may hate I may have
to do it a different way I'm always I'm always up to learning new things okay now
I'm going to measure that oh good lord oh 18 and a quarter and 18 and a quarter wow
that worked out actually pretty good I'm right at 18 and a quarter
and that'll work okay that will work 18 and a quarter um let's remember I measured it at 18 and
three-eighths but uh uh 18 and a quarter was up what I really wanted okay well let's let's do
I'm going to do I'm going to do this one from the face like they were telling us okay
and I'm going to measure I'm going to still make it I'm going to try 18 and three-eighths
ish right there and I'm going to do it in the middle too because now I can see it see
and measure it from the plastic not not from the insulation
okay my sheetrock knife's not really working too well it's kind of shoving in
and yeah the things the things that I have to do
now let me let me try the metal stud I don't think it really matters
I can still use my plywood I'm going to use the metal stud this time
okay I just want to concentrate on that plastic right because that's what's going to show
and my knife is a nice sharp one and I may have to just be careful as I go
that's my that's my first pass okay and now once I know that that's
straight and it's not going to go anywhere and that my plastic is in fact cut then I can go
see it's all cut now now I can go down all the way down this piece of track is actually working
is actually working pretty good you know if you do if you do and and see if you get any boo-boos
see we've got this extra white that I can trim off if I had to okay I know I know that's right
I might have just learned something on there but but like I say if I was cutting r13 r11
insulation r19 insulation even r22 r20 r29 I'd flip it up I'd flip it around
I'd flip it around on the other side because with real if you can if you can imagine real
thick insulation if this piece was really super thick I would measure and I would figure out what
I want 14 14 and then I'd go 14 14 and then I would I would score this make a line and then
I would go a little bit deeper a little bit deeper a little bit deeper and then I would just
cut right on down there wouldn't even need a straight edge on this side
like if I was spinning it in a two by four wall or ceiling joist or something like that
you see what I mean okay so now I'm going to look at this one this one's got all kinds of
folds over on this side so I'm going to make that over there like that and I'm going to go 18 3 8
are you getting all this I think you are measure from the plastic 18 3 8 I'm just going over
the 18 and a quarter mark just a hair just a hair you know I could have made an 18 and a quarter
18 and 3 8 is going to work too okay
3 8 measure twice cut once right okay now now I can see my marks I could let's let's try the
piece of plywood let's say you don't have the track you got just the plywood okay make sure
it's a straight piece of plywood the cut is is the factory edge the thing with this is after a
while you may start marking up your factory edge piece you know what I mean but that looks that
looks pretty good right there okay get your pressure down there so it's not going to move
and I'm just gonna from this edge I can go that way now I can hold that
and I'm just concentrating on getting through the plastic first okay okay there
get yourself all the way through looks like I'm good now I can go all the way down there you go
next piece and let's see let's see how I did
I'm right on my pencil mark you don't see my pencil mark there
but I was right I was right on it I'm I'm at 18 and 3 8 and I'm right there at 18 and 3 8
okay there I got three down three down five five more to go
