When Met fellow Yeo-Jin Katerina Bong came across a 17th century copy of Rusconi’s edition of Vitruvius’s “Ten Books on Architecture” in the Department of Drawings and Prints, she was elated by her discovery—but disheartened by the book’s physical condition. Go behind the scenes at The Met as curator Femke Speelberg and book conservator Clare Manias discuss the book’s history and extensive illustrations as it is conserved for an upcoming exhibition.
Featured Object: Giovanni Antonio Rusconi (ca. 1520–1587), I Dieci libri d'architettura di Gio: Antonio Rusconi…novamenti ristampati, & accresciuti…, published in Venice [Francesco Nicolini] 1669 (1660). Printed book with woodcut illustrations. The Metropolitan Museum of Art, New York, Rogers Fund, 1952 (52.519.32).
AI Generated·May contain errors
When I first saw this book, I thought it was going to be really straightforward.
But as soon as I started working on the spine,
it was apparent right away it was going to be harder than I thought.
My name is Claire Manius. I'm the assistant librarian for book conservation
at the Sherman Fairchild Center for Book Conservation in the Watson Library in the
Metropolitan Museum of Art. A book conservator concerns themselves with the object of the book.
We're not necessarily focused on what it contains exactly, but just the container that it comes in.
We think about the people who owned it before, the people who read it before,
throughout its history, preserving all those things, and then handing it over to somebody
else to look at. Hi Claire. Hi, good morning. Morning. So what we have here is an architecture
book from the Department of Drawings and Prints. It's a 17th century book by an architect called
Giovanni Antonio Rusconi, who's a Venetian architect and engineer from the 16th century.
And we'd like to put it on view soon, but it's not in the best condition.
That's true. This book is a commentary on Vitruvius. We all know that Vitruvius
remembered Leonardo da Vinci, and so Rusconi was finding that a lot of the translations of
Vitruvius had a lot of mistakes. So he decided that he wanted to come out with his own Vitruvius
edition with the illustrations and the text. And then what we see here is probably another 17th
century either architect or connoisseur who knew a lot about Vitruvius and architecture,
translated the text and made their own annotations as they went on through the book.
And they're all directly across from... Related to the printed page.
It went on to be owned by several other architects, and we have indications of that here
at the front of the book, where there are several labels from the 19th and early 20th century,
including by Ogden Cotman, who was a famous American architect for the Vanderbilt family,
he built the breakers. And then when he passed away, we bought a lot of the books from his
collection, and this is one of them. So I'm very happy that it is here with you now,
because obviously it's a very special book, specifically because of the personal interactions
that we see in the book that tell us something about its history, about how the book was used,
and then its current state. We can't really even open it properly,
let alone flip through it with a visitor or show it in the gallery.
So this sieve, it's a horsehair grid made to strain paste, and it's from Japanese
scroll mounting techniques. And then it will turn it from this, like,
kind of scraggly glob to a smooth, slightly translucent, cohesive glob.
There's a pretty straightforward list of things that you check for when you're looking at
something. You always look at a book from the outside to the inside, so the attachment of the
boards, the condition of the spine, the condition of the corners, the head caps, the tail caps,
the joints, and make sure that those are all working. And if they're not, why not? In the
case of this book, the covers were off, the original binding was missing, so the repair is
the new binding. Okay, so first I'm going to start with toning this paper to replace the missing
leather on the book, so I'm just toning it to the same color. I'm using my favorite color, raw umber.
It's the perfect color of leather and dirt. The way that people have interacted with books in
their entire history, in some ways, is exactly the same, even though materials and technology
surrounding them has, like, changed the world, basically. It's, like, immersive, it's personal, and
it's so familiar, and yet you really have to be like, well, wait a minute, that piece of thread
is 500 years old. Sometimes you have to kind of remind yourself that, like, there's a timelessness
and a time. This is the thing that I think people are gonna freak out about, so I'm a little nervous.
I'm gonna lift the leather on the top, the paper goes under this lifted leather, and then attaches
around the side. Okay, here we go, ready.
The leather was much, much more fragile than I thought. I just went very slow. Historic books are
really good retainers of architectural artifacts that otherwise would not have survived through
floods or, you know, war or other destructive activities.
My name is Katarina Bong, and I am here to talk about Vitruvius with you. Vitruvius was a famous
ancient Roman architect, and I look at Vitruvius as a lens through which architects from the
Renaissance understood and interpreted structural failures. A lot of the Renaissance architectural
treatises are entirely based upon Vitruvius's ideas, beginning from how to find a good site,
what is a good material, how do you build a strong structure,
to what sort of technology are employed in these construction sites.
Rusconi is very special because he illustrates parts of Vitruvius that a lot of writers or
architects left out. Book two on material history, usually it's not at all illustrated. Sections on
timber are never illustrated, but Rusconi illustrates it. It's a very useful aspect
of architectural history. So today I'm going to attach the board to the book. The treatment was
just much more difficult than I thought. It was pretty challenging, but I did lift all along the
spine edge and all along the board edge, because you often have to take things apart a little to
put them back together. I already added the flange to attach the board to, so when the flange
slides in, it'll be nice and smooth. I think book conservation differs from other forms of
conservation because it's all about accessibility, right, and allowing people to use and consult and
learn and get whatever they want to get out of all the books that are here.
So now it can be seen and consulted and enjoyed by everybody else.
So here's the book. Yeah, fantastic. It's wonderful to have a back intact like this again,
able to pick it up without worry. Yeah, as I started to lift the leather, that's when I noticed
how difficult it was going to be. But I was able to attach the hinge directly to the spine on the
back and directly to the surface of the board, so the attachment is strong. And I also like that
the aesthetic is preserved. Rather than giving it a new binding, it still has the cover,
so it preserves its age, but it's still functional. It has its historic authenticity. Yeah, exactly.
But it's ready to go on view in the galleries. It's ready to be consulted again. Absolutely.
Good. Fantastic.