A conservator may face many challenges when working on a painting—ranging from old varnish and surface grime to areas of lost paint, superficial damage, previous restoration attempts, and even major structural failures. Sometimes, all of these issues must be addressed at once.
Though the artist is unknown, this version of Salvator Mundi dates back to the early 1600s. In the 400-plus years since its creation, it has undergone numerous interventions—with mixed results. In addition to extensive inpainting, the wooden panel has suffered repairs and even splitting due to poor framing choices.
This video takes us through the conservation process: cleaning the artwork, removing overpainting, addressing structural damage, and developing an innovative solution to a recurring framing problem.
This video is brought to you by Squarespace. From websites and online stores to marketing tools
and analytics, Squarespace is the all-in-one platform to build a beautiful online presence
and run your business. In this video, I'm going to be focusing on a painting on wood panel,
a Salvador Mundi. No, not that Salvador Mundi. A different one. And this painting is really quite
old, probably dating back from the 1500s, maybe early 1600s. And aside from being really dirty
and having some flaking, the main issue is that the panel has split in several places,
and this was due to some poor framing techniques. And I'll get to that in a little bit.
But you can see that as the wood has moved, some of the paint has flaked off. This is almost
unavoidable when you're dealing with a wood panel, but proper care and precautions can minimize
this effect. In addition, you can see the split right there and some old conservation. Now,
any painting of this age is definitely going to have old work on it, and some of that old work is
going to need to come off in order for me to do the conservation currently. The back of the panel
looks pretty good, but you can see some areas where old supports have been attached in the past,
and those have been removed at some point in the past, probably because they were ineffective,
but the scars, so to speak, are still there. You can see some of the old cracks are still
showing through, and I'll have to address all of those. But before I can address any of those,
I have to stabilize the paint layer first, and so I'm using an archival reversible adhesive
to just make sure that any of the areas where the paint is fragile or vulnerable aren't lost
during the handling process, because of course, I don't want to do anything that would cause further
damage to the painting. And so I'm just using a very small hypodermic needle to inject and place
that adhesive in and around and on the areas where the paint has started to flake or where it's been
lost. And this adhesive will be removed at a later point, but until that point, it's just going to
hold that paint in place so that no more is lost. Now, this adhesive is both solvent and heat
activated, so it's easy for me to remove in the future, either with the solvent or by application
of localized heat. Now, the next step is for me to remove the painting from the frame, and this is
where I can talk about the reason that the painting has split. You can see all of these mechanical
fasteners, these pieces of wood, these brackets, and then those little brass screws that I'm going
to be removing in a second that hold this other piece of plywood in. These guys right here. All of
those exert pressure on the painting, and they're designed to keep it in the frame and hold it flat.
But unfortunately, when you try to immobilize a piece of wood, the tension that's built up must
go somewhere. And so if the wood can't bow, cup, or twist, or otherwise distort, that tension has to
be released somehow. And in those cases, the wood splits. So in an effort to keep this panel flat,
whomever decided to frame it like this has effectively planted a little time bomb in this
painting. And so as the humidity changes, and as the painting flexed, and expanded, and contracted,
and changed shape, it was prevented from doing so enough, and so it just split. And so I'm going to
have to address that, and address the poor framing choice later on. Now the first thing I'm going to
do is take a moisture content reading from the panel. And as we can see, it's at about eight percent,
which is fairly dry and stable, and that's okay. But in order for me to handle the panel and to
repair the splits, I need to make the wood a little bit more flexible. And I do that by introducing
humidity. So I've created a little humidification chamber with a portable greenhouse and a
humidifier. And I'll set the humidifier at a pretty high rate of humidity, maybe 75 percent, because I want this
entire chamber to be really humid so that the painting can absorb this humidity. I'll keep an
eye on it with a digital gauge that's a little bit more accurate than the humidifier, and I'll check
on it throughout the day and the week. It's important to keep an eye on this because you want
to make sure that the painting doesn't absorb too much moisture and really distort. And so I will
make multiple checks, and when it finally reaches a level of humidification or moisture content that
I'm happy with, I will proceed to the next step. Now again, I'm going to take a moisture reading
because I want to make sure that the painting has absorbed enough moisture to be pliable, but not so
much moisture that it's like a noodle. And so we can see here I'm at about 19 percent, which is
fairly high. And the reason that I've humidified this panel to make it more flexible is because I
want to bond the panel back in the shape that it naturally wants to exist in. And so you can see me
flexing the panel into its natural bowed state. If the panel were dry at eight percent, it probably
would have cracked at this point, and I definitely don't want that to happen. So I'm going to take a
tracing of the panel in its bowed state, and I'll use that later on to create a jig. And paper and
perfectly fine for my needs here, but come on, let's be honest. What are you going to do with
paper and pencil aside from doodle your favorite web design company's logo? I mean, if you want
anybody to see what you have to say, you need to get it out there. And the best way to do that is
with a website. And with Squarespace, it really couldn't be easier. With a few clicks, you can get
a domain and build a website and start sharing your creativity or your business with the rest of
the world. And if you make a mistake, you happen to color outside the lines, Squarespace has 24-7
human support, so they'll get you back up and running in no time. And when you're ready to
launch, go to squarespace.com slash Baumgartner to save 10% off your first purchase of a website
or domain. So back to the painting. Now, before the break, you saw me take a tracing of the
painting in its flexed and cupped state. And I want to bond the panel back together in that state
because that's the state it naturally wants to be in. But in order to do that, I have to create a
jig to hold that shape when I'm gluing the panel back together. So I've taken that tracing and I've
transferred it to some stock pine. And I'm here at my bandsaw, removing the material that I don't
need and preserving the shape of the panel. Now, I'm not going to create the jigs just out of wood
because I don't want the wood to touch the surface of the painting. That would be a little too rigid
and too hard. So I'm going to be adhering some felt to this wood. Now, I am using an archival
adhesive here because I want to make sure that nothing off-gasses through this felt onto the
surface of the painting. It may seem unnecessary, but these are the steps and precautions that you
got to take when you're dealing with artwork. So I'm adhering this felt to the wood and that's
going to provide a little bit of margin of error for the shape of the panel and also make sure that
there's a soft surface touching the painting itself. Now with the jigs created, I'm ready to
begin the process of bonding this split panel back together. And for that, I'm going to be using
material that you may be surprised to see me using, and that's hide glue. And this is certainly an
imperfect adhesive and one that I don't use very often, but after consulting several wood
conservators, objects conservators, furniture conservators, and other paintings conservators
who have dealt with wood panels, the consensus was that as imperfect of an adhesive as hide glue is,
it really is the best one for this application. So using a hypodermic needle, I'm going to try to
flood this joint with as much adhesive as I can. Now this is a pretty thick adhesive,
so it's going to take some time to slowly drip down and penetrate into that crack.
If the panel were split into two, it would be much easier because I would have access to both
sides of the joint. But I don't, and I don't want to flex this panel too much because I don't want
to run the risk that it splits any further. Now keep in mind it is humidified, so it's a little
bit more flexible, but I still want to be careful. So I'm going to apply the adhesive
to the surface of the painting and allow it to slowly drip down into that crack.
Where possible, I can flex the panel a little bit to get access into that crack and inject the
adhesive directly, and that's going to ensure that I've got a really great bond for both of
these pieces of wood. Now I'm also going to apply some adhesive to the face of the painting so that
I can ensure that both sides get enough adhesive. I can always wipe off the excess, and the painting
hasn't yet been cleaned, so there is a layer of old surface grime and varnish atop the painting
that's protecting it from the hide glue. Now one of the other reasons I chose hide glue is because
it has a fairly open adhesion time. So that means it's not going to dry very, very quickly and
harden like some synthetics, which gives me plenty of time to set up the jigs that I've created
and get the painting all clamped up, because this painting is going to require quite a few clamps
to maintain pressure not only against the split and to make sure that there's a good bond there,
but on the jigs as well to make sure that the shape is being preserved. So I've put some silicone
release film on the surface of the painting, and even though I have that felt, I still want to make
that the painting is isolated from that material. I don't want to scratch the painting if there's
something in the felt, and the silicone release film also just makes sure that if any hide glue
seeps out, it doesn't bond itself to the felt, and then I have to deal with that. So I'm using a lot
of cauls, which are just scrap pieces of wood, and I'm going to start off by using some simple
hand clamps to get everything set up. And once I've got these hand clamps all secured and in place,
I will move on to other clamps that will allow me to exert more pressure across the painting
and to get it in a state that I like. Now it's important as I'm going along and clamping
everything that I make sure that the painting is in the state that I want, that the jigs haven't
slipped, that the silicone release film hasn't moved, that the hide glue hasn't dried too much.
It's just a slow process and there's really no way to rush it, but if you take your time and
you do everything right, the results are going to be good. So you can see as I clamp down on
the painting, the felt distorts a little bit and conforms to the shape of the surface of the
painting while still exerting some force on the painting to restore it to that bowed shape that
I want. Sounds complicated, it's a little difficult to explain, but hopefully when you
see it, it makes sense. And so now with the first round of clamps applied, I can begin putting on
another set of clamps that's going to exert pressure across the painting, and these are
really what's going to make sure the split is well bonded. I'm going to use little pieces of
wood to make sure that the clamp doesn't depress directly onto the edge of the board because this
is really, really old wood and I don't want to run the risk that it damages the board. Also,
this little piece of wood will give me a more even clamping pressure across this edge. Again,
there's no way to rush this, and if I had another set of hands it'd be easier, but I've done this
many times before and I've learned lessons throughout all of those trials, and so I'm a
And the next time I do it, I'll be even better than this time. And so again, I'm just installing
more clamps and I've got some behind the painting and I'm going to put some in front of the painting
so that I'm getting equal pressure. Because even though these clamps are exerting pressure one way,
they can still distort the panel a little bit. That is, if I were to only put the clamps on the
back of the painting, they would want to pull the painting in one direction. If I put the clamps
only on the front of the painting, they would want to pull the painting in that direction too.
So by putting clamps on both sides, I can exert even pressure and minimize the amount of distortion
that the painting is subject to. And when you're gluing up something, whether it's a piece of
furniture or a panel, there is never a time when you would have too many clamps. More clamps are
always more better. And so I've got three, six, seven, eight, nine, ten clamps on here right now,
but I'm going to be adding more because I want to make sure that I've got equal pressure across the
panel in multiple directions. And I would rather have a lot of clamps exerting a little bit of
pressure than a few clamps exerting a lot of pressure. Clamps can sometimes skip and I don't
want that to happen in this instance. And of course, I've got the clamps, so there isn't any
reason why I wouldn't use them. Now every time I tighten one clamp, I go and I check the other
clamps to make sure that they're also exerting good pressure. Because as you clamp anything down,
it's going to move a bit and you want to make sure that all the other clamps that you've
previously installed are still maintaining good pressure. And so here we can see exactly why I
This painting is now secured in the state that it wants to be in, and it's being bonded together
in that state. Without those jigs, I wouldn't really be able to bond the painting in that
bowed state. I'd have to bond it or attempt to bond it flat. And that's not how the painting
wants to exist now. And so I want to bond it back together in that state that is going to
keep the painting as stable as possible. And so here you can see that curvature of the panel
being mimicked by the wood and the felt, and it's providing good contact and support across the
entire panel. So it's not just where the clamps are, but that pressure is being distributed across
the entire thing, which is really important to make sure you get a good bond and you don't run
Now through the magic of editing, I've let this painting sit for three days, and that's going to
give it plenty of time for the adhesive to dry and to stabilize. And so now I'm just going to
be removing the clamps. And just like putting the clamps on, there's nothing special or magical
about this. It's just a matter of going slow and taking your time and making sure that you remove
them in a deliberate even manner so that none of the cauls snap back or fly off. And basically,
I'm really keeping an eye on the painting to make sure that there's no unnecessary tension placed
on it. I don't want the painting to all of a sudden now be subject to an unknown force and
then split in a different way. You've seen I've added some other blocking and clamps there just
because I saw some areas that I wanted to exert a little bit more force and a little bit more
pressure on that weren't being met by the existing clamps. So those blocks in the back there that I'm
removing now, those and the felt were used to provide some pressure on those two spots in
particular because I couldn't reach them with the clamps otherwise. And now this is always kind of
the moment of truth when you're taking off the last couple of clamps, and you can see A. if the bond
has held, and B. if the shape has held. And luckily for me, it has. And so we can see the painting is
now unified and the curvature has been preserved, which is exactly what we wanted. And now with the
panel stable and unified, I can begin the cleaning process. And this naturally begins with removing
the surface grime that has accumulated on the painting. And I'm using a paste here to soften
and lift up that surface grime, which consists mostly of oils, dirt, dust, and other particulate.
And I need to do this for a couple of reasons, but primarily because I need access to the varnish
layer, which is underneath this surface grime. And the solvents that I'm going to be using to
remove the varnish don't penetrate through this accumulation of surface grime very easily. And
when that's the case, oftentimes one will turn to stronger and stronger solvents or more aggressive
techniques, and I want to avoid using very strong solvents and very aggressive techniques if
possible. So by removing this layer of surface grime, I will reveal full access to the varnish
layer, which can then be removed safely and deliberately. This painting isn't terribly dirty,
but you can see that enough grime is coming off that it makes a big difference. And I'll work
section by section, removing the surface grime until I'm confident that all of it is off, and I
can begin removing the varnish. Now, unlike cleaning the painting's varnish off, I don't have to worry
about damaging the paint layer because the surface grime is just sitting on top of the varnish layer,
which in this case is protecting the original paint. And when I'm satisfied that all of the
surface grime has been removed, I'll move on to the next step, which is removing the old varnish
layer. And I'm going to be doing something a little different this time. I'm going to be cleaning the
painting under UV light or black light so that you can see what it looks like when the varnish is
removed. I've often talked about using black light to reveal old varnish and retouching, and now I
want to show you what that means. So as the lights go dark and the black lights go on, you can see
the painting come into focus. You can see that their painting has an overall green haze to it,
and that's old varnish. You can also see right above where I'm cleaning that there's a rectangle
where I've removed that old varnish, and you can see the original paint below it. Now there are
other areas on this painting that are fluorescing dark purple, and those indicate old retouching,
and I'll get to that in a little bit. But as I roll the swab with solvent on top of the painting,
you can see the varnish start to dissolve and be picked up by that swab. Now right above where
I'm cleaning, there's a spot that's darker than the other areas, and that's old retouching.
And as I switch from UV light to visible light, you can see right there that's the retouching,
and using the solvent, I can begin to remove it. And when I switch back to the UV light,
you'll be able to see what I mean when I say that it fluoresces a different color.
It's a little bit darker. Dark purple, black, that usually indicates retouching. Not always,
but usually. And so you can see as I'm working through the painting to remove the varnish,
the original colors come through. As always, I'm working in a deliberate, controlled manner,
and focusing on one color and one shape at a time, because I want to make sure that I have control
over what I'm removing. Because not all of the paint on this painting is as stable as the other
paints. And that is, some of the paint, like in the background, is a little bit more fugitive,
and I have to use a more mild solvent and a more delicate approach. Now I'm wearing UV protecting
glasses here because I'd like to keep my eyesight, and prolonged exposure to UV light is bad for you.
So again, I'm just slowly working my way through the painting, and I'm focusing on the red areas
here. I'm not going to be cleaning the fingers just yet, because I don't know if the solvent
mixture that I'm working with is appropriate for that section. I'll have to make some tests to
determine that. Now, here you can see a lot more retouching come visible. And it wasn't really
visible when the varnish was on the painting, because this varnish is so yellowed and so thick
that it obfuscates the retouching. And so I've cleaned the majority of the left side of the
cloak, and I'm working on the right side. And you can see there's a lot of damage that was retouched.
All of those little white spots indicate paint loss that was retouched, and the retouching has
been removed. So now we can see areas that I'm going to have to retouch. And now I'm going to
start cleaning the area where I know there's been some structural repairs and retouching. And it's
always exciting to remove the varnish in an area that you know that's been worked on, because
you never know what you're going to find. And in this case, I'm finding not only a lot of retouching,
but I'm finding some residue of glue. And you can see these blotchy areas that are a little bit
lighter, kind of white or light green. That's the old glue. And I'm guessing that that's an
animal-based glue, hide glue or rabbit skin glue. And you can see the solvents do nothing to it.
They won't cut through that adhesive. So I'll have to come back later on with water and remove
that residue, because I don't want it on the painting. So that's the old adhesive residue.
You can see it throughout. And that is old retouching. And you can see how it fluoresces
darker than the other paint. So with all of that retouching removed, we can see just how much fill-in
medium was used by the last person who worked on this painting. I'm suspicious of why that much
was needed, and we'll find out about that in a little bit. So at this point, the majority of the
figure's been cleaned except for the face. And the face looks pretty blotchy right now. There is a lot
of retouching on it. You can see some of those larger splotches right there. And this painting
has been worked on a lot over the past several hundred years. And unfortunately, much of the
original painting is probably no longer here. And much of what we saw with the naked eye
was just overpainting. And I'm going to be removing most of this because I want to get back to the
painting's truth, so to speak. Get back to what's left of the original. And then we can talk about
putting the painting back together. So as I clean the painting, you can see some of those darker
areas, particularly in the eye. That's all retouching. And some of this retouching was done in oil,
some of it was done in watercolor or gouache, and they take different solvents to remove. But
ultimately, all of it does need to come off. At this point, the painting's been fully cleaned,
and almost all of the retouching has been removed. And I will transfer it over to my table,
where I will begin to remove the excess glue adhesive. In addition, the water is going to lift
off some of the old gouache or watercolor retouching that was laid down before they did
the oil retouching, as was common many, many years ago. And now I can start to remove some of that
old fill-in material. And I want it gone because I don't know what it's made of, and I can probably
use a better material to fill in. But mostly, I want to check to see if it was really necessary.
Now this panel had been broken and repaired once before, and when the panel was glued back
together, it wasn't aligned properly. And so whomever glued it back together saw fit to correct
their mistake of aligning it improperly by just building up a layer of fill-in material to try to
smooth out that ridge, which is absolutely crazy. Unfortunately, I can't undo that because the
adhesive that was used was not a reversible adhesive. So that bond is now permanent. And the
only thing I could do would be to split the panel again and re-bond it. But I don't want to do that
because it's too risky. I can't guarantee it's going to split on that glue joint, and I don't
know what I'm going to find. So the best I can do is to remove the excess fill-in material and then
fill it in more conservatively with a modern based medium. And I'm going to apply it over the entire
area, liberally, and smooth it out. Luckily, this painting does not have a lot of impasto. In fact,
it's very, very smooth, so I don't have to worry about texture all that much. In fact, I want to
make sure there's almost no texture in the fill-in medium. So I'll apply it throughout the areas of
losses and over this ridge. And I'm not going to be building it up because it's not necessary and
it's inappropriate. I'm only trying to fix the areas where there has been paint loss. So I'm
going to apply it liberally, smooth it out, and then I'm going to slowly work to remove a lot of
this medium. And first I'll do it with my tool, and then I will switch to swabs and brushes and
anything else that will help me remove this fill-in medium after it's dried. And this fill-in
medium is flexible, so it should not crack or break as the panel expands and contracts, which
is really important because I don't want there to be an area where we get a hairline crack in a
couple of years. So you can see all of the areas that I've overfilled where there's been paint loss,
and now I have to go back and remove it. I know it sounds crazy, but I'm using my fingerprints
to act as an abrasive or a sandpaper, so to speak, to remove a lot of the fill-in medium. I need to
make sure that the area is smooth, and the best way to do that is with your fingerprints because
they are really sensitive, and the extra abrasion quality that they have helps remove the material
without having to resort to sandpaper or anything like that. And then I can switch to swabs to remove
the excess material and get a little bit more delicate. And I'm going to try to remove as much
of this as possible while still leaving enough that the areas of losses are filled in, but not
so much that it's excessive or that there's unnecessary medium on the painting. So now I'm
ready to apply the isolation layer, and there are a lot of reasons to do this, but for this painting,
the main reason is so that I can get an idea of what I'm working with. As you can see, the painting
is really washed out, and if I try to retouch against that when I put the final varnish on,
my retouching is going to look wrong. So I apply this layer of synthetic resin that's ultraviolet
to the painting, and it allows me to see what the colors will look like when it's finally varnished
so that I can match my colors accordingly. Now this is a heavy molecular weight resin,
meaning that it's going to rest atop the painting, and this is also really helpful
because these old master paintings have a tendency to absorb varnish unevenly, and the final varnish
may look blotchy without this undercoating of isolation resin beforehand. And now on to
retouching. This painting had a lot of paint loss, and some of it was very consequential,
like in the face, and some of it was not so consequential, like in the background or the
red of the cloak. And I'm going to start off with the areas that are going to be easier to retouch
because it's just easier to start off with an easier area. But also I want to get familiar
with the artist's palette and how colors were mixed, and I want to see how my colors are going
to work with the artist's palette. So I'm using archival and reversible paint, and that's important
because if in the future someone decides that I did too much or too little or just doesn't like
the way I did it, they can remove all this work without running risk of damaging the painting.
And so the first thing I'm going to do is lay down a block of color in the areas of loss. And
this is where I take a guess at the color and lay it down first. And here you can see with the red,
I'm pretty close. I'm going to come back later on and add some darker color, some lighter color,
a little bit more orange perhaps. But this is important to get an idea of what colors I need
to mix and to start to integrate the losses back into the painting. Now here I'm retouching the
area where I glued the panel back together, and you can see the difference on how little filler I
had to use compared with the previous repair on the right hand side. I'm going to slowly just
dot this away, and you can see that it doesn't quite look right. The paint color isn't quite a
match until I run over it with a little bit of mineral spirits, which will simulate the final
varnish, and it disappears. Now the red and the background were pretty easy to retouch. I know
that sounds crazy because it may seem really hard, but the red was actually fairly straightforward.
There weren't a lot of editorial decisions I had to make with the red or the background,
but the face is a whole other story. This painting had really really been abused in the past. It had
been way way over cleaned, and the technical term for that is skinning. And a lot of the original
paint had been lost, and then in successive restoration attempts, the people had used the
original paint kind of as a guide to repaint the face. And that is, they looked at what was left,
and then they made a decision about how it should look, and added a lot of paint to the painting.
Sort of paint by numbers, if you will. And I'm really trying to avoid that because that's not my
job, and I don't want to get into a situation where I have to make a lot of editorial decisions,
because that's not the conservator's role. But in a case like this, where there's so much losses,
it's a fine line, and there is no clear delineation between too little and too much. And again,
that's why we're using reversible paints, so that if in the future the consensus is to do no
retouching, all of my work can come off. If in the future the consensus is to repaint the whole face,
well, my work can come off, and that can be done. Now the hand, on the other hand,
is pretty easy to retouch. There's a lot of paint loss, but there isn't a ton of detail,
so I really can just focus on making these distractions, so to speak, go away. And as I do
that, the hand starts to come into shape, into focus, and you can start to see it as a hand,
rather than as a hand-ish looking blob with a lot of damage. But again, I'm really trying to limit
how much paint I add, because I want to preserve as much of the original, and only address the
losses. Now at some point, this painting had gold leaf on it, but through successive cleanings that
were a little too aggressive, a lot of that gold leaf was lost. I'm not going to be leafing it with
gold, because it's not a suitable material for me to work with in this case. But what I am going
to be doing is making my own gold paint out of mica powder and ultraviolet stable synthetic resin.
And mica powder is a mineral that, when crushed and pulverized, has a shimmer to it, and there
are different colors of mica powder. So I have four different colors of gold right here, and I
can mix them, and add them as necessary. And though it's not real gold leaf, it's going to
give the impression of gold leaf. And again, what I'm trying to do is retouch the damage away enough
so that your eye isn't drawn to it, so that you can see the painting as a whole, and not see the
damage. Now it would be impossible for me to leaf all of these tiny little areas of losses, and
that's why I'm using this gold paint. This too is reversible. That resin that I mixed the mica
powder with is reversible. And I'll slowly work my way through here, and try to address as much of
the losses as possible, without kind of going overboard. Because particularly with metallic or
gold pigments, it really doesn't look good if you try to integrate it fully, without kind of making
it look old and damaged. So I'll lay down some colors, and then I'll come back in and add some
kind of dirt, I guess you'd say, or losses, so that it blends in. And ultimately, if I get it right,
I think you won't notice these areas of loss, and you'll just see the painting as a whole.
And now on to varnish. Once I'm satisfied with my retouching, I can go ahead and put that final
coating of synthetic ultraviolet stable resin atop the painting. And that's going to give it
the final sheen that I want, and really bring it to life. So I'm going to mix my varnish out of
gloss and matte varnish. And I do this because I don't really want full gloss, and I don't really
want matte. I want something that's glossy-ish, but a little bit more satin. I'm adding an ultraviolet
inhibitor to it, so that the varnish doesn't break down with exposure to UV light. And then I'm just
going to apply it via well-charged natural bristle brush to the painting. And you can see on
the painting, there are areas that look a little bit matte, those dots. That's the retouching. And
this is another reason why the final varnish is pretty critical, because it unifies the sheen.
So it takes those areas where I've applied retouching that look a little flat or matte,
and it brings them into unison with the rest of the painting. So back and forth, back and forth,
slowly, just applying it with brush. And then I'll go back and remove any little hairs
that have fallen in, or little bits of fuzz. Now ultimately, I decided that I wasn't happy
with that sheen. I wanted a little bit more gloss. And so I'm coming back with a high-volume,
low-pressure spray gun, and applying another coating of varnish. And I can do that because
I'm spraying it on. If I tried to brush it on, I would disturb that first layer of varnish,
and it would become a goopy mess. Now at the top of the video, I mentioned that one of the
reasons this painting had split was because of the framing choice that was made in the past.
And I'm going to do everything I can to correct that, because I want to ensure that the painting
has a long life, and that we don't run into another problem of a split panel again. So I've
taken that template that I made for the jigs, and I've transferred it to some polyethylene foam,
which is an archival material. It's inert, it won't react with anything, and it's flexible and
soft. And that's really important. I'm taking this piece of polyethylene foam, and I'm going
to be wrapping it in black linen. And I'm going to be wrapping it in black linen for a couple of
reasons. One, it looks a lot better than just having a piece of foam laying around. Black looks
a little bit sleeker. You won't notice it when it's in the frame. It's also softer, and I want
to make sure that the foam doesn't scratch the varnish. And it also just looks more professional,
and I want that to be the case with all of my work. So once this foam is wrapped in the black
linen, I can start to use it to build up a little liner inside the frame rabbit. And this is what
the painting is going to come into contact with. So I'm going to line that rabbit, which is a
groove in the wood where the painting sits in, with these pieces of linen wrapped foam.
And they are contoured to the shape of the painting. And effectively what I've done is
create a situation whereby the painting is touching and resting against these soft pieces
of foam and linen. And then I'm going to apply more foam on the back and use this with picture
framing brackets to hold the painting in place. And so what I've done is place the painting into
a foam encapsulation that will allow it to move as necessary. Because if you remember,
this wood is going to expand and contract and twist and turn and do all sorts of things with
humidity changes. And I want that to happen. I'm not trying to immobilize the wood because
that tension has to go somewhere. And if you immobilize the wood, it's going to go into the
middle of the painting and it's going to burst. So by sandwiching it in between foam, I've created
a situation where when the painting needs to change shape, all it has to do is push against
that foam. And because this foam is relatively soft, it's not going to be providing a lot of
resistance against that movement. And so with all of the conservation work complete, the painting
stabilized, the crack repaired, the old retouching removed, the painting cleaned, and the new retouching
applied, and the painting in a new frame system that will prevent any further damage, all of my
work is complete. This one was a really interesting project because while it seemed to be fairly
simple, there were a lot of ancillary efforts that were required to make sure that it was a success.
Things like building the jig, humidifying the panel, creating a novel framing technique, and
those are all things that are in the wheelhouse of the conservator. It's not always just scrubbing
paintings clean and retouching. As a conservator, you have to be able to address these unique and
odd occurrences as they come along. And if you do so correctly and you do so successfully,
the painting will have a long life beyond you. And that's what I hope I've given to this painting.
I hope I've restored it back to a state where the client can enjoy it for what it is, where they can
see the beauty in the brushwork, where they can see the drama in the figure, and where they can know
that this painting will be stable and sound not only for their lifetime while they own it, but
for the future and for whomever owns it going forward. So as always, I hope you've enjoyed.
Stay tuned for more and go ahead and give a subscribe.