The BEST HUNTING ARROW

Exploring Ancient Crossbows
3 followers
5 Video Views·Feb 5, 2026
The BEST HUNTING ARROW
Comments are disabled for this video.
Ultimate arrow build time. Not ultimate, but this is going to be my arrow setup for this hunting
season. I finally decided. I did a lot of testing. I literally went on Lancaster Archery Supply
and I bought like five different brands of arrows, shot them all, tested them all, and landed on
these for a couple different reasons. We can go through those kind of as throughout this video,
but I'm going to first show the final product of why, and what, and where I'm going to be using
them. And then we're going to dive in and I'm just going to show you how I put them together
in case you're interested about how I put them exactly together.
So we're going to start with the VAP TKO, four millimeter arrow by Victory. Went with this arrow
obviously because of the four millimeter. I love a four millimeter. I used Easton Pro Comps last
year. Why I'm not using Easton Pro Comps this year is one, they are really expensive. They're
a target arrow. I didn't really notice that much of increase or any increase of accuracy over any
other four millimeter arrow. I've used Easton Long Range four millimeters. Those are also really
good, but the Long Range ones and the Pro Comps were not as durable as this one. Just shooting
in the backyard and everything, I'd break a Pro Comp every now and again. It just hit the target
weird. A back end of an arrow, you'd hit it and it starts splitting. These I haven't broke one yet,
except that attack when I shot a boulder, it did blow up. But these are pretty solid. I'm
very impressed with the durability of them and it's a four millimeter. So impressed with the
durability, it's a four millimeter and I'm shooting as good as I possibly can with them.
They're grouping, they're doing well. That's literally the reason why I chose them. They're
not even the, they got like levels to them. What's the highest level one? A V1. V1. Is this the
lowest one or the middle one? It's a V6 probably. V6. This is the, this is the expert series,
whatever that is. Oh, V6. Yeah. V6 under 350. So 350 is fine. V6. So it's not even their highest
tier arrow. So I could even expect better things out of their highest tier ones, but I'm kind of
cheap on some things. And I was like, I'm just going to try these out and test them. And I'm
running a X-vein, a four-fletch X-vein, which is the same configuration I ran on Pro Comps last
year. And I'm running that because this is going to be my elk, my moose, and potentially some
mule deer arrow. So I'll be experiencing a little bit further shots potentially. And also a fixed
blade. So I'm having these bigger fletchings on. It's like a two degree left helical, which is
pretty standard with the Zebra bow strings. It's going to want to come out of the bow left. So I'm
going to fletch them left helical, which is really important for fixed blades. But this, this arrow
setup is going to do really, really well for a fixed blade. I have just 50 grain outsert,
undergrain tip. We can see what the final, final weight is. I'm not even a hundred percent sure.
Where's the scale? You took it out. I didn't know that. All right. Scale zero. So we're looking at
435. Phenomenal for anything in North America that you want to kill with a fixed head on it.
I don't know if I'd run a giant expandable with this light of arrow. It's not even that light.
It's a very medium arrow. In that 420, 420 to 460 is like my opinion, just a very good medium arrow.
It's going to be fast. It's going to be, you know, 280 plus feet per second can be right in that sweet
spot. It's going to be very good. Be able to shoot a hundred yards. Just overall a great arrow. I am
just going to run the stock knock. I'm not going to do a lighted knock because they, in the four
millimeter, the lighted knocks do tend to break a little bit more, a little bit more inconsistent
and bend. So I'm just running, running the plain knock, which will be great and standard and fine.
We're going to build this in just in a second. That's like my Western arrow. Yes, we're going
moose hunting. If you guys saw that little teaser there. So I'm going to be using this for moose.
We're going on elk hunt, some mule deer stuff. That is what that arrow is going to be. And yes,
you can run an expandable on that. I'm probably going to run these with an expandable going on
an antelope hunt. So antelope are a little bit smaller, you know, more white tail size with
an expandable on this. It'll be totally fine. 435 pounds. So we'll see, but a little bit longer
shots. That's what I'm going to be running. For white tails, everything, white tails,
what I landed on was a rip TKO from victory. With, I might change this, but I have a blazer
set on there right now and a four-fletch. I might just switch to a three-fletch. I really didn't
notice that much of a difference switching to a four-fletch, no real benefit. So I might still do
some testing and just a standard three-fletch. And we do have a lighted knock on there. I run
lighted knocks. Obviously it's a little bit more fun to watch them in videos and stuff. And I just
like them to more to shoot a little more enjoyable to see right where they go. And obviously find
your arrow after you shoot something five millimeter arrow, a little bit stronger,
a little bit heavier white tails. You're not potentially shooting as far, you know, hopefully
you got just a 20, 30 yard shot. You're not 40, 50 yards, no need to really cut through the wind
at all, but we still have a lot of steerage to help steer. I'll probably run like a G5 dead meat,
expandable broadhead. So it really doesn't need a ton of steerage, but it's going to help these
big blazers for sure. Again, I ran with the Victory because no durability problems. I shot these a
bunch, never broke one. I don't know what it is, but they've really excelled, especially in their
components. I know when I tested their stuff a couple of years ago, it was like their components
weren't a hundred percent there. There were some inconsistencies in their knocks and their inserts,
but they really, I don't know what they did, but they really stepped it up. I'm impressed.
Zero problems, 50 grains in the front. I'm going to do a hundred green head.
The lighted knock does add like 25 grains, something like that, about. So it is important.
I do shoot a hundred percent of the time with these lighted knocks. Now don't switch back and
forth. We have a total weight. I'm going to need a field point. These are going to be a little bit
heavier, but it's still, it's still not a heavy arrow. I'm not, I did the whole 550 grain arrow
thing, 500 grain arrow thing. And we could talk for hours on that. That's for a different video,
but I'm just not about it. I didn't see enough, enough value. There's pros and cons and everything,
but there was more cons in my opinion. So this is a 438. So honestly it's, it's the same 435 to 438.
It's about the same, but it's a little bit thicker. It's going to be a little bit more durable.
Still going to be pretty quick, probably in that 280 plus range. Anything you need for,
for killing a whitetail. I am, I'm excited for the setup. I really like it. 4 millimeter out west,
5 millimeter with the blazer, more Midwest whitetail type stuff. So let's, let's dive in.
Let's build some of these and I'll just kind of show you how I do it. Underrated thing when arrow
building is a nice light. Lighting is really important to making sure all your cuts and your
glue and everything is good. You know, if you're down in your basement and it's dark and you can
miss things with light, or I just have really bad eyes and I need light, one or the other.
So we have a, we have some more rip TKOs, but I guess I bought V1s. I forgot about that. So I'm
going to be interested to see if V1s shoot any better than, than V6s. But if you guys are cutting
your own arrows or whatever, I'll just really simple talk this through. There's different
precise ways you can do it. Some guys like to take the knock out and put like a point in there.
So it's a completely round like cylinder that they're, that they're moving it on. Because if
you, if you stick it in the end and move the knock, it kind of oscillates a little bit. I don't think
it's that much of a difference. Again, kind of my philosophy on thing is the biggest variable is you.
So you can go to these extreme extents, but most of the time I don't. So we're going to cut this,
already have the length correct. You're going to want to put the knock end in first.
And you want to push it into the blade and then spin it. You got to make sure you spin it.
There we go. We're going to confirm with the other arrow that we have at the right length and it is
good. Same length. So now what we're going to do is I have this G5 squaring tool. It's kind of,
it's kind of a newer one. I thought it was newer. Riley said it's been around forever,
but I thought this was... Concept has been around forever. Concept has been around forever,
but I think this is like a new jig. It's actually kind of cool. So you just lay your arrow down
on here, put it in, and it's like a diamond bit sandpaper thing. You just kind of spin it a few
times. And what that does is it gets your, it gets your edge a hundred percent square. Sometimes
these blades can kind of do something funky to your edge. And this just gets it square. I'm just
going to do the other one that I already have. So I don't forget. Bada bing, bada boom. We are
ready to glue in. Again, arrow building is all a little bit different. Everyone does it different.
Um, I don't clean out the inside of my arrows. I used to, and then I stopped doing it and didn't
notice any difference at all. So I no longer clean the inside of my arrows. Um, sometimes I
super glue them. Sometimes I use a blue glue again, just testing the last batch. I wanted to shoot
them like right now. So I just super glued them and I shot them, been shooting them for a long
time and none of them fell out every now and again, blue glue. If you're like a hot day or
something, it's really stuck. It's it's, it can melt on kind of a low temperature. You know,
I don't know what it actually is. It's probably like 120 degrees, 130 degrees. It starts breaking
apart and sometimes they pull out, but I don't know. I did a dozen with the super glue and it
was, it was totally fine. Um, but I'll show you the, the fan favorite, the politically correct
way to do it is with the blue glue or, um, like Easton hot melt type stuff. So we're going to do
that. I also have my torch in my truck, which is currently not here because it's getting worked on.
So we're going to use, we're going to use this and we have a torch in my truck because rather
than I broke a trailer the other day, I'm going to fix it. But we fixed it. We fixed it. That's
the important part. With this blue glue, all you do is heat up the glue. You don't really want to
heat up the insert too much or anything. You don't want to get the carbon of the arrow hot
or your fingers. That almost tripped on me. Carbon is actually really sensitive. You get it hot,
it can break it down, make it more fragile. So all we're doing is we're heating up the glue,
putting it on the insert, make sure it's 360 coverage, and then we're just going to heat it
back up. It's a little easier with a torch. How I'm doing this is kind of not, not awesome,
but we're just going to heat it back up. Uh, a tip from George Riles, if you have to use pliers
to make arrows, you're running it too hot. You should always be able to use your, your hands
and your fingers, um, because it never gets that, that hot. Then you just run it off with your
finger. Again, it's not too hot to touch or anything and shoot a couple of times. The rest
of that will clean up. And there's our insert. We have our knock already installed. And I think
I'm going to do, I might do a three fletch on this dozen and just see, see what the difference
is. If there's any, we did the noise comparison video and there was like a very slight difference,
but it was negligible. So there's no sound difference really going from three to four.
Um, so I think we're just going to rock and roll with three. We're gonna do white. I really like
white or yellow. Um, obviously white shows blood better. Um, it's better to see it, um,
in the dark or just, just in general, obviously yellow, neon yellow is really good too.
Black probably looks the sleekest and the coolest, but I try to stray away from black
because it's so hard to find your arrows, but it does look the coolest.
One thing with fletching arrows, you want to make sure that it is far enough down the shaft
that it's not going to touch your face. I was at Total Archery Challenge watching people shoot,
noticing there's so much vein contact on people's faces, on people's chins,
that that's going to throw your shot off your, your, your tune off everything shot by shot.
So make sure you have it far enough down the arrow that you're not touching your face. That's
how I run it on a bits, just that bottom dash line at the bottom of the fletching use a boning
blazer bond. I'll tell you what blazers I fletched, I've had fletched arrows with every fletching
nearly. Blazers require the least amount of maintenance possible to get them to stick.
I do not clean off my arrows. I do not clean the fletching. I literally put glue on the vein
and stick it on for five seconds and they stick. No fuss about it at all. I've tried them all.
Some require pens, acetone, sandpaper, and all this wizard, wizard type stuff.
And blazers, I don't know what they're doing, but there's, or boning in general,
the materials they use is just, I don't know. I don't know what they're doing,
but it's a very low maintenance. Make sure that that's all square as a piece of glue stuck in
there. And I miss a step and I missed, I missed two steps because I have to turn this to a three
fletch because it's at a four fletch right now. Pause. It's 120. Yep. Because it needs to equal
360. You are smarter than you look. Smarter than I look, but still not very smart. Yeah.
Didn't set the bar. We didn't set the bar very high on that. All right. I'm going to get rid
of this fletching because it's probably dry now. Load in a new fletching. So I do a couple dots and
then I just run the nozzle on it a couple of times. Smooth it all out. You don't want any
air pockets. A big thing why there's not good adhesion is there's air pockets in there. So
that's why a good light comes into play. You just kind of look at it, make sure it's straight. And
then a Bitzenberger is literally the most simplest fletching jig ever. And it's, it's pretty
consistent. So you slap it on the metal, drag the clip down and then just do, do, do. And then I
like to two-hand it, push down like this, really get all the adhesion, make sure it sticks. I just
wait about five seconds. You can wait a little bit longer if you want. Then you just open, turn,
pull. Then you're good. It is still a little wet, so you don't want to really ream on it,
but you just spin it, go do the next. And you know, fletching arrows typically requires a
cold beverage, good music, TV, because it is one of the most boring things in the entire world,
at least for me. I like to do them typically really fast. You can, you can be very precise
about it, be very pretty and neat and make sure there's no glue, wipe off the glue and everything,
but I just run it how it is. I don't really care about how they look. Number two, going in there,
you want to make sure that everything just looks good because you mess up, mess up once and you
got to redo the entire thing. Open, spin, turn, spin to the next. Another important thing is make
sure that arrow is down in there all the way. Sometimes when you spin it, it kind of pops back
up. Got to make sure it's down all the way. Just like that, we got a blazer three fletch with a
slight about two degree left helical. And now, like I was saying about cleaning up glue,
as you can see, there's like little glue, you know, spewing out on the sides. You can take
a paper towel and just kind of run it down. That'll just make it look a little, little nicer
when it fully dries. You can do that. You don't have to. It's just, it's just aesthetic looks.
And what I'll do for all fletchings is once I do them, I'll lay them all out nice and neat,
just like this. Don't let anything touch them. You just kind of let them dry for,
you know, an hour, typically, preferably overnight to get them fully solid. I never wait that long
and typically don't have any problems. I lay them all out. And then what I do is I'll run through
and I'll tip and tail them. You just put a little tiny dot on each side of the vein.
And what that does is just helps prevent them to start peeling. You know, if you shoot the target,
pass through it, it helps just prevent snagging, overall durability of the vein sticking on.
Don't have to do it. It just helps. Doesn't make it look super pretty either,
but it really helps with durability of the vein overall. Now we are going to do
the four millimeter. Gonna switch this back over to four fletch and slip it in. We're going to
double check, make sure that it did switch over to four fletch. And these are X veins, like I was
saying. What length is this again? What did we do? Three. These are three inch X veins. Landed on
three. It's a good middle road. Same thing with this. I run it on the same line. Nothing is
different. That's how my arrows do well at. I have no face contact with that. I've confirmed that.
There's no real reason for me to change that. So that's how I run it. A little bit bigger vein.
Longer vein on this. So we got to do a couple extra dots. Same process though. Real nice looking
vein. That yellow really does pop. Count to five. Gently take it off. Taking it off in like five or
ten seconds is also good because sometimes the clamp will glue to the fletching if you hang on
to it too long. So taking it off early helps with that. Just like that. We got a four fletch, X vein,
a four millimeter. That's pretty easy. That yellow matches that knot really well actually.
I call it slick. But that is my arrow setup for this year guys. I'm going to run this
western and white tail setup. It's going to be great for fixed blades, longer distance because
and for white tails, expandables, or fixed blades if I mess around with it.
Yeah that's kind of how it is. 430 ish grains for both.
Rocking and rolling. We do have, we dug up the, where's that 550 grain? Do we put it back?
Just because we talked about it. This was a couple years ago. I built these five millimeter
full metal jackets. These are 340 grains. I had 75 grain brass hidden inserts and I had a big
single bevel. I think at this time it was called a Strickland Archer Helix. This thing just took
so much work to make it fly well. You know it was slow. I had to shoot like 80. I think it was,
I was shooting a Hoyt Helix or a Hoyt RX1 at the time. It was like 82 pounds. It was still like
only 260 feet per second, 250 feet per second and this broadhead, you know any sort of single bevel
broadhead after 30 yards or so you have to really individually tune each broadhead. You got to spin
them. Using the blue glue is important. You literally take a little lighter. You shoot.
If it hits off, you light it up. You spin it a little bit. Let it cool back down. You shoot again.
They're just a lot of work and really I just don't think there's as much benefit.
If you're obviously doing some big game in Africa, you know and want to do some crazy stuff
or love you know shooting deer in the shoulder on purpose, this still won't go through a shoulder
bone. But anyways, I've done it and I really just have landed back on a mid 400 grain arrow
when it makes sense. You know use expandables when it makes sense. Use fixed blades. Obviously
a little bit bigger animal. I like to use a fixed blade on more reliable smaller hole can cut better
white tails expandables. But that's kind of my arrow setup for this year. We can go on and on
and on and on and on and on and on and on about it because arrows is something that is so technical.
You can do spine aligning. You can do group tuning. You can do all sorts of fletching
variations. All sorts of weights. All different spines. It's really endless and at the end of the
day it's personal preference and what you are confident with. That is all that matters. The
most important thing is make sure you get out there and practice. You can shoot an untuned bow
well. You can have a very tuned bow and still not shoot well because you just don't practice.
So make sure get out there practice. Shoot with your broadheads before season. Make sure everything's
dialed. Practice, practice, practice. Don't overthink it and be confident in your setup. We'll catch you guys in the next one.
