Customizing ALTRA Arrows Tips & Tricks

Exploring Ancient Crossbows
3 followers
1 Video View·May 22, 2026
Customizing ALTRA Arrows Tips & Tricks
AI Generated·May contain errors
Video Summary
AI GeneratedThe video demonstrates the technical process of building and testing custom archery arrows. Host and guest Tyler Denham compare different shaft diameters, inserts, and fletching options to optimize weight and balance. Through rigorous testing and FOC calculations, they determine that 4mm arrows provide superior wind resistance and penetration compared to .246 models.
Comments are disabled for this video.
Welcome to the channel.
Today we are going to explore ultra arrows
and we've got a guinea pig, TD, Tyler Denham.
He's over on the Oak Shaped Gear channel.
We're going to have him do some experimentation
in preparation for one of my really good friends, Blake.
He's a sales rep for the Outdoor Group.
A lot of you archery shop owners,
you probably know him or work with him.
He's just actually my buddy.
He does CrossFit.
He's coming up to Spokane to hang out with me
for a couple of days.
We're gonna work out a bunch,
but we're gonna geek out on all the stuff that they offer.
So we're gonna build some arrows today.
We're gonna go through this giant box
that Blake sent me in preparation for his arrival.
You could potentially go with the 250s or even the 200s,
but I think the GPI in these are already pretty,
like they're up there.
So I think you can risk it and run the 300s.
Have you ever run a .246?
Yeah.
Yes.
That's the, 246 is your standard,
or not your standard, but your four mil?
No.
Or no, five mil?
No, 204 is five mil inside diameter.
The 246 is actually probably more like typical
of what people run.
Okay.
Five mil is kind of a smaller diameter,
but still not small.
And then four millimeter is your .166-ish inside diameter.
Are you confused yet?
We've got a three pin micro, fiber size .019,
and it's a three pin vertical.
You would probably like that.
If you don't want to run vertical pins,
we have the three horizontal.
I like vertical.
Then we have two pin vertical.
These are dovetail.
This is a direct mount.
This is a dovetail.
Two pin vertical, three pin vertical,
and a three pin horizontal.
Do you want to run horizontal or vertical?
Vertical.
Do you want two or three pins?
Three.
So we can give these back to Blake.
They have stabilizers.
This is a micro hunter,
eight inch stave with probably two ounces in the back.
You're running the 80 mountains series,
the oak shape ones.
So I don't know.
Do you want to run these right now?
I don't.
Here is your bridge lock conversion bar.
I think you're going to need that.
For that, for the, this guy?
Yeah.
Okay.
Cool.
Release aids.
I knew that you requested some release aids, so.
We have a index.
Which index is that?
And a thumb button.
This is the, I think these are both the new ones.
This is the S?
S2.
Oh, okay.
The S2.
We need to test that out today.
And then the apex core.
Okay.
So we could probably test that out in this video as well.
What grain broadhead do you run, bro?
I've been running a 100 grain.
Viper Trick SS, 100 grain, inch and a 16th.
That looks pretty badass.
Wicked Trick, that looks.
Wicked Trick.
Let me see that.
Viper Trick.
Oh, that looks pretty badass.
And then these are your.
Replaceable broadheads, or replaceable blades.
So is that just for Viper Trick and Viper Trick,
which is these?
So you got replaceables for these.
You want to test those out on critters?
Yeah.
So these Viper Tricks are inch and a quarter,
a little bit bigger.
They look pretty amazing.
We'll have to task you with testing flight
and shooting probably spring bear with these.
Yes.
Guys, Tyler's up for the task at hand.
And they do come with the replaceable blades.
It's a very affordable solution.
I have killed an elk with a Slick Trick back in 2014-ish.
And then this.
Ooh, what are those?
Slick Trick Rebel?
Revival.
Don't mind if I do.
I like those kind of little bleeders up top here.
The top of the ferrule.
Oh, wait.
Terrible.
I'm bleeding.
Okay, I take it back.
These are decently sharp.
I am bleeding.
Cool design there.
You need to go shoot some stuff and report back.
Guys, for this video today,
we just kind of overview of what we're looking at.
I wish we could do a live video.
I'd be like, what y'all want to see?
Do you want to see us put that site,
install it and get it doped in?
Do you want to see us use the release aids?
Do you want to see us build some arrows?
I think first things first,
we should probably build an arrow.
So this is going to be part one.
We're getting ready for my buddy Blake to come into town
to teach us all about their offerings
because we like to tinker.
And I just like to know about everybody's offerings.
That way I can,
I feel like I could at least know more and share more
and understand and learn and grow with you guys.
That's our journey.
So Tyler, you want to go four mils?
Do you want to go two, four, six?
Or both?
Eventually both, but let's start with these ones.
Okay.
I think they're a little lighter.
Well, let's find out.
So this is going to be your basic insert.
It's got the Neuralene right here.
So this is going to, we could probably hot melt this.
And then you can, it's got threaded in the bottom
so that you could add more weight for front and center.
And how does it fit?
That's going to stress me out.
Like if I was using epoxy and you can't get it in.
Oh, I don't want to get stuck.
17, that's got to be aluminum.
Not a huge fan of aluminum.
Is this standard for it to not fit?
Okay, so it just slides over.
I guess it is cool that you can add in,
screw in weights from the back,
which is what that tool is for.
You can go in the back door, if you will.
Why are you laughing?
And then, except I'll just show you guys.
So you could go here,
screw in whatever weight you want in the back.
If you, and then you could take weights out
if you wanted to,
which does give you the option to manipulate
the front of center or weight up front.
I don't have any other options.
That's what you're going to have to run on this 246.
So I guess it is what it is.
We're going to see what, how it works.
Okay.
With what they sent us.
Let's grab your bow and let's draw one back.
I'll silver sharpie.
We'll cut some arrows and we'll get them set up for you.
Pretty good knock fit.
So there's your burger button.
I'm going to go a little bit this way
of your burger button, okay?
This guy goes in here and screws in.
So you don't have a lot of real estate to hot melt.
So you gotta get that hot melt in there.
But when you,
that fits tight.
We'll just mark this and then measure.
Three eighths.
Okay.
So I'll keep three eighths in mind.
Tyler's going to draw this one back.
Got it.
All right.
To the arrow saw we go,
and I hate my arrow saw.
You gotta be really,
I don't know the,
who makes the best arrow saw on the market?
Comment below.
I showed you the Ram spine tester.
You got them all marked up.
Stiffest spot.
First time using it,
it's pretty annoying.
It's tedious.
Yeah, tedious.
It's a tedious endeavor.
Yes.
All right.
So we got to pick a vein.
Now you were running max stelts.
Three?
Yes.
Three max stelts weighs over 27 grains.
So if you ran three max hunters,
put you at 23,
you'll save four grains.
Not a ton of savings,
but it has got a taller profile,
which I do think it will,
it's louder,
but it will steer fixed broadheads.
Mobeta, arguably.
I'm running the hybrid HPs.
You don't like doing the same thing I do.
I know that about you.
Hot melting right now.
You ever see the video where I torch my hat?
That was real life.
This is your aluminum.
17 grains.
And then you got your weights
that you can buy extra.
If we go with just what comes in the package, right?
This?
Are we talking the four or the two?
Both.
Okay, yeah.
Just this, just that.
Then if we want to later on,
we can put the weights in.
Okay.
As far as coming out in targets,
knock on wood,
but I haven't had any issues.
Now shooting through bag targets,
that's a whole nother,
that's why I don't shoot through bag targets.
To me, bag targets,
they like,
they want,
they want your components.
They need your components.
So Tyler is going with the 17 grain.
This has got to be aluminum.
You sure you want to do that?
That's going to put you at like four, low fours.
Okay.
He didn't even flinch, folks.
What was the total arrow weight
of the arrow you were running?
484.
That'll come off easy.
So this excess wax,
it'll like become dry in about five, 10 minutes.
And then you can just literally
almost peel it off like a ring.
It'll come right off.
These don't just slide right in though.
Like it's a tight fit.
Let's just take some mustard on it.
So,
so we've cut these arrows.
We've squared off the ends.
We've put them in the ram spine tester.
We found the stiffest spot.
We're using hot melt.
Tyler handpicked his weights.
We had options.
He's picked his veins based on weight, no wrap.
And then he's going to basically
kind of see which diameter.
Now, obviously I think the four millimeters
should give you just a little bit more performance
in the wind.
Like for wind drift out West,
it seems like it's always windy,
especially when the thermals kick in midday
and you got your prevailing.
They might penetrate a little bit more.
They might group a little bit better.
They might not.
He's going to have to find out.
But GPI,
the fours are definitely
above 10.
And these two four sixes are definitely under 10.
They're at 9.6.
9.7 for the two four six.
And,
10.5 for the one 66.
And the knock in the one six sixes
is around seven grains.
And the knock in the two four sixes
are just over 10 grains.
You want to take everything into consideration,
but we're going to get them fletched
and then we'll get you some final aero weights.
We might have time to throw this sight
into Tyler's bow,
check the levels,
and then have them go out and start shooting,
get you a little bit of footage
and end this marathon video.
This is the Arizona Mini Max.
Going to use the Arizona primer pen.
Just get a dab there.
I'm going to go with whites for these two four sixes.
Generally just prime them all in one shot.
Tyler's elected to go to the right.
You can get Mini Max to the left or to the right.
I have two of each.
That's what I got.
We also got the Blitz.
If you want to go less than,
these are about,
I don't know,
they're over five degrees helical.
So if you want to run a little less,
you probably want to use a Bitsenberg.
MFJJ's threatening to make his own jig.
There's the Veinmaster Pro.
Boning's got some jigs that they make.
I'm trying to think what else.
OMP was threatening to make one,
or they came out with one at ATA in 23.
I haven't seen it come to market yet.
So I don't know if they got some hiccups in manufacturing.
Maybe somebody threatened to sue them.
I don't know.
I don't,
none of my business.
This is not to market.
This is a cheap jig.
And I like my arrows spinning.
So I haven't had any parachuting with those hybrid HPs.
I did get a lot of parachuting with the Max Stealth
with this jig.
So be curious to see how your shots are looking
80 yards plus with this.
This is the Elk Shape Edition ones.
Max Hunter.
I do think they'll steer a broadhead exceptionally well.
So Tyler's fletching up the four mil.
I'm getting the two, four, six.
I'm under the heater.
I moved away from the heater.
I like heat.
We ran into a problem when we hot melted this
and put it in.
We actually bent this little insert.
So we actually had to reheat them and take them out.
So we opted to just use glue, regular glue.
So they're not coming out, Tyler.
So no, don't hot melt these ones that come
with the two, four, six.
They were easily bendable.
So we just elected to go with glue
and actually use Max Bond glue for the insert,
not an epoxy.
And I've done that many times in the past with no issues.
Or you're out a few inserts.
You'll have to order more with your arrows.
So once you got 10, 15 seconds go by,
pop and then get some, a little bit of,
I think, I think this is about all you need.
Just give it a quick little,
so yeah, I use a little bit too much glue on that one.
I'll do less on the next.
But that's set.
That's a nice offset, Tyler.
And then I'll dab all the back and fronts.
Just one little dot of glue.
You got fill points?
We got a few.
You got a few?
Cause I don't have any 100 grain fill points anymore.
I gave them away.
But that is a good looking arrow there, bruh.
Yeah.
Cool.
Okay.
We're going to flush the rest of these
and we're going to save some battery on the cameras
and we're probably not going to record it all.
Also, I should say like,
so Tyler's silver sharpied the stiffest spot.
Did you move the knock too?
Some of them I did.
Yeah, I can tell.
So makes it perfect.
This lighter blue is where you want your cock vein.
So we're going to go cock vein stiffest.
You can do it the opposite,
like cock vein the weakest or off a little.
Just do it the same across the board.
So I'm doing what you marked.
Perfect.
This is the 246, the Max Hunters.
Max Hunters.
To the right.
Using the Arizona Easy Mini Max to the right
with their 17 grain aluminum insert.
It's not going to weigh much, man.
We're off the ground.
422 total aero weight.
422.
What are you, Dan Staten?
What are you doing there?
Okay, so we'll check the FOC on this one here in a second.
So this is the four millimeter
or the 166 inside diameter with what comes with it,
which is a sleeve and like an insert
that goes down into the shaft.
This weighs 50 grains total?
Something like that.
49?
Yeah.
And then a hundred grain point,
total aero weight is 479.3.
Very close to-
Very close to what you were running.
So it'd be cool,
because you already have a sight tape built for that.
Yep.
Okay, so it'll be cool to see how that compares.
Let's do a quick FOC calculation
because people will want to know.
So I will get my trusty app out.
So I use ArcheryPal, FOC, FOC.
I need a measurement from the throat of the knock
to the end of the shaft.
Where am I here?
Go to the end of the half out.
That's how we're going to do it.
End of the half out there.
Okay.
So we're looking at 30 inches right on the nose
and then find me the balance point.
Boom.
Beep.
18.25, survey says.
So your total FOC is 10.83.
So the GPI is high enough
to where you'd have to put more weight up front
to bolster your FOC.
What you could do with this aero,
you could add 20 or 10 or 30 total grains
to bolster that up,
or you could go up to from 100 grain broadhead to 125.
Obviously you're upping your total aero weight.
There's nothing you can do back here.
You got three pretty light veins.
They weigh 24 grains total.
The knock itself weighs 10 grains.
You don't have a wrap.
So because the GPI is so high in this four mil,
you'd have to do something.
But I trust that you're basically about 11% FOC.
I'd like to see like 13 or 14,
but we'll have to see.
Well, just for kicks and giggles,
what would 125 grain,
oh, we'd have to put it in and remeasure?
Yeah, yeah.
But it would go up a couple percent.
All right, this is the 246 aero.
Total length is 28 and a half.
Let's find the center point.
Bingo.
17.
You're at 10% FOC.
So neither one of these aeros have great FOC.
You have a 17 grain aluminum insert in the front.
This is not planned,
but we're going to go ahead and go here.
I'm going to give you this.
I'm going to look up for the non-micro,
that's micro, that's micro, non-micro.
And we're going to put both in.
Or do you want to do one at a time?
Let's do both.
We need to shoot these aeros we don't have all day.
Boom.
Let's weigh it.
Now, let's see what you got.
451.
That seems a little more reasonable.
Do you already have the overall still?
Yeah, I got the overall.
13.16.
He's in the sweet spot.
I think.
You'll have to test.
That's kind of a cool system
where you can manipulate a little bit.
But Tyler, you have a lot of aeros
and you only have 11 more of these.
Might need to get on their website, order some more.
I think it'll make a difference in your long range.
All right, guys.
So now what we're going to do
is we're not going to put this sight on today,
unless Tyler wants to.
Not today?
Not today.
Okay.
Well, let's go shoot these aeros real quick.
I've been itching to shoot.
We're running out of daylight.
Let's go shoot some aeros and see how they group.
Here we go.
That's the 246.
This is that 166.
Looks right.
A lighter aero, higher?
Yeah.
And the 166 should be close to what my other aero is
and it's pretty dead on.
Let's back it up.
Ooh, was that 166?
Yeah.
That's pretty sweet.
They're loud.
Also, it's the acoustics here in my, I'm not kidding.
No, they ain't max stelts.
They're not stealthy.
Significantly higher.
That's good.
10 yards.
I say we shoot these at like 80 or something
since they're pretty close.
So these would fit a standard head, man.
So you don't have to even go down to deep six.
Yeah, let's finish this video
with like some longer ball aero flight.
Right, low, like bullseye or 10.
That's pretty distracting, Luna.
I'm gonna steal your exact footprint.
Bullseyes.
TD.
What's up?
Ultra aeros.
Looks like your 166s match up with your Rampage.
You just shot at 83.
Four millimeters you've never used.
The nice thing with those sleeves and outserts
is that they fit standard broadheads.
Got okay FOC.
You just shot some good groups down here.
Thoughts on the four mil?
Definitely feel more flimsy or smaller.
They're just smaller because they are.
Otherwise, everything's shooting good.
Yeah, first thoughts, they seemed pretty good
when I was spine testing them.
They're pretty similar across the board
as far as tolerances go.
So more to come.
I like the components on those fours.
Versus the two four sixes.
I'm not a huge fan of that component.
Here's your aeros.
This shot was just, I don't know, could be you.
But then your second shot was right there.
And again, this is like using the sight tape
off the other aero.
And then this one right here.
Oh man, this might be the luckiest group of my life.
But I really like the ultra aeros for Tyler
to test and tinker.
I want him, I'm voting that he goes four mil.
I like the idea of the wind drift resistance.
I like the idea of the penetration.
I like the components better.
And I like the front of center.
Like your FOC was decent.
And you could bump up to 125, yes,
and make your aero a little bit heavier.
But it might just group way better
if we put real broadheads and shot that same 85 yard shot
or whatever it was.
So guys, thanks for coming along.
It was a fun aero build.
We are going to put that CBE sight on his bow.
I know we just put a spot hog triple stack on it,
but he's a revolving door.
I think he wants to run that.
He's going to take home those release aids
and practice with them.
And so we won't show any of that stuff
until Blake gets here.
So Blake, I know you're coming to Spokane.
You're going to work out.
You're going to shoot bows.
You're going to break down some of the stuff
that you sell and you rep.
And we're just going to educate our audience guys.
Always be tinkering in the fact
that you're pursuing perfection.
Hit that sub.
We'll catch you on the next one.
