✉️Email for collaborations and business inquiries: [email protected]
AI Generated·May contain errors
All right guys, today's the day. I have been wanting this KitchenAid for way too long. How
many of you have seen this? It's probably been a, is it been like one or two years that this thing's
been out? I have been wanting this ever since I saw it for the first time but I could never justify
that price. Especially when my KitchenAid works perfectly fine. So apparently today is the day I've
had enough. And here's the other thing. I use this all the time and I hide it because I don't love
the red on my countertop. I'm just renting right now. The cabinets are super dark but the vibe of
the green is gonna look really cute and I'm just gonna be able to leave it up all the time. Now
here's another thing. I'm going to show you all the steps to doing this but you can paint it whatever
color your heart desires. I'm going to show you a couple options right here. If you have a KitchenAid
and you're also not loving the color anymore, you can take these tips and turn it into whatever
you want. Before we get started, here are all the materials you will need. You can just take a
screenshot of this in just a second but I also have everything linked in the description. I did
go pick everything up at Lowe's except for the actual color of the mixer. So when I get to that
point, I will explain where I found the spray paint but you can find it linked on Amazon which I do
have in the description. Alright so the first step is probably not a surprise. We're just gonna
clean our mixer and I'm using some Dawn soap and a scrubber brush to really get any of the buildup
that's left on my machine. I'm pretty good at wiping this down but I have not given this thing
a deep clean. You can probably tell it's pretty nasty right now. So I'm doing that before we move
on to the next step. The next big step is sanding but I do want to disassemble some of the things
off of this mixer. So I'm going to remove these two screws back here to take off the strip that
goes around the mixer and I will also be removing this back piece that covers the motor but I'm
going to wait till after I sand most of it down before I expose the motor. And then that brings
us to the sanding portion. So this is by far the most time-consuming and the thing I was the least
excited to do because I do not like sanding. I'm just using 400 grit sandpaper and we're really
just trying to remove all of the shine. This will help the fresh coat of paint adhere to the mixer.
I think the key here is you need to get into every nook and cranny. You don't want to be
missing any nooks or any crannies. Anywhere you see some shine just get it in there. Shine be gone.
See? No shine. Not on my watch. I'm cringing this whole time. I hate sanding more than I hate
pretty much anything. These things are heavy. Okay we got to get some of the like bottom
around the edges here. Do you need anything though? Yeah some muscles. Oh just kidding.
I do but we're doing with mine. Fine. Once you're done sanding you'll want to wipe it down really
good to make sure there are no colored dust particles left on the surface. Now that the
sanding is done I'm going to remove the motor cover so we can spray that really well but also
cover the motor since the back of the cover had a vent in it. You'll want this completely covered
with plastic. So I'm just grabbing a grocery bag and I'm wrapping the cord in the bag and then I'm
going to just tape this to the back. Just make sure you really really really cover this. Tape
it really good because this is probably the most important thing that you don't want to be spraying.
Next you'll just want to tape off all the knobs and any other area that you don't want paint on.
Before I ever use any spray paint I give a few sprays to another surface to make
sure the paint is flowing evenly. So that's what I'm doing right here but I did end up using two
coats of the primer. I also wanted to share a quick tip so if you ever notice any bumps or
uneven spots at this point in the process sand that down before moving on to the color.
And even if you notice them after you've applied the color if you're noticing any
imperfections with your paint you can always buff that away and then apply another coat.
So here's the color that I found. I did a really good search online just trying to find the best
match with this color and I found this olive camouflage color. The only place I could find
it in store was at O'Reilly Auto Parts so that's where I went and picked some up. They do have it
again on Amazon so you can always just do that but I wanted it that day and that's the only place I
could find it. I did end up doing two coats of the green paint maybe two and a half probably. I just
really wanted to make sure everything was even and perfect before sealing it with the top coat.
And then for the final top coat I did three to four coats of this. I really wanted to make sure
this is sealed and that it's safe to wipe down from messes. It's actually crazy how this feels.
It is so smooth you would never believe this wasn't the original color and that it's been
spray painted. So if you follow these steps I know you'll be so happy with how yours turns out.
Now I'm bringing it back inside to reattach all the parts and I meant to do a talking portion
in here about the bowl I bought because I felt like I had to splurge on that wooden bowl. I
actually couldn't find any available from KitchenAid. It looks like you can only get it with
the mixer. Maybe I'm wrong but I couldn't find them anywhere online. I did find them on eBay for
$250 which I thought was crazy. But I did find this one on Amazon for half that price so that
is also linked in the description and I am just so happy with how this turned out. I'm obsessed.
I'm obsessed. My mixer is staying right here in the corner and I am never moving it. It is hard
to believe that this thing was red this morning. Honestly it's crazy what a little paint can do.
Anyway that's all for today's video. Thank you guys so much for watching. I really appreciate
each and every one of you who are subscribed and watch any of my videos. I know they're so random.
You never really know what you're gonna get over here but I really am so grateful for you guys.
And if you're new here I'd love for you to join and hit that subscribe button.
Thanks again for watching guys and we will see you guys in the next video.