Send correspondence to: House On the Mend 7582 S Las Vegas Blvd Suite 189 Las Vegas, NV 89123
I would love to read your comments and video requests in the comments below.
Hi, I'm Mike with House on the Mend, and in this video, part one of a two-part series,
I'm going to show you how I made this breakfast nook, complete with cushions and under seat
storage. So let's get going. If you break it, he will fix it. If you buy it, he will build it.
House on the Mend. So there's several unique design features that I want to point out in
the beginning of this video that may differentiate it from other videos you find on YouTube, at least
it did for me in my initial research. Number one, the backrest is angled back at 12 degrees for more
comfort. Two, the seat base doesn't go straight down. It angles back at around 12 degrees, and
that is to make it easier to get in and out when there's a table in place. The entire field is done
with rails and stiles and raised panel all out of cherry wood, and I had to color match it to the
existing kitchen. Another feature that's different than most of the videos I found was that this
breakfast nook is octagonal in shape. So rather than a 90 degree corner, we have several 22.5
degree angles that we have to deal with that make up that octagonal shape. Now this was a very
involved project. It starts with a two by four wooden frame, plywood substrate for the backrest,
and then it's all clad in the cherry wood that you see here. This video is going to be more of a
narrative of how I did it. It took a tremendous amount of time and effort to video every single
aspect of this build. So if you find it helpful, will you please give it a thumbs up and drop me a
comment below. Let me know what you would have done differently or what you think of the project.
I'd really appreciate that. So in video one here, we're going to go through the entire build of the
frame, the cherry wood build out, the hinge work for the bench seats, and then in video two, I'm
going to show you how I made these seat cushions and some design ideas that I implemented in doing
so. I first searched the internet and Pinterest for design ideas. I then measured the existing
space and table that would go into the nook to get the most comfortable seating height and distance
from the wall. Here's a rough sketch of the five section design I decided on. I then made a precise
storyboard out of MDF from which I derived many of the final dimensions. I purchased kiln dried
two by four lumber and started making the base frame with pocket hole joinery. I carefully cut
out the existing baseboard so the frame would sit flush to the wall. Our breakfast nook is octagonal
so each frame piece was cut with a 22.5 degree angle. Then back to the storyboard to make the
angled bench seats. The corners of the nook are rounded so I notched the back of the frame pieces.
They won't show in the final product anyway. There are three outlets in this space that I didn't want
to lose so I ran Romex out to new electrical boxes. Since I wanted storage underneath the benches
I cut the seats in two pieces and installed piano hinges. The back corners of the lid were in
conflict so I cut them back at an angle. Much better. Next I moved on to the backrest. I made frame pieces
out of three-quarter inch plywood beveled at 12 degrees. The wings you see coming off the back are
for screwing into the walls. I purchased cherry boards from a specialty lumber company here in Las
Vegas since it's not locally available. When it came time to begin milling the cherry I had planned
to use this Husky brand workbench with included router plate but as you can see here the plastic
top sagged significantly and I had to use a floor jack to support the router. Now I love this mobile
workbench but the router table feature is a joke. Luckily my wife saw me struggling with it and she
and the girls bought me this awesome tabletop router table from Ryobi for Father's Day. Back
in business I milled up the panel rails and styles with a special mirror image router bits.
I then glued up boards for the panels. Once dried and cut to size I began shaping the raised panel
on the router table. I really love the raised panel look and it matches the existing kitchen
cabinetry. The storyboard is so essential to visualize and measure the rails and styles.
Once both end panels were glued together I laid out where I wanted the outlets and traced their
outline. This small opening was a great opportunity to use the three and a half inch circular saw
attachment for my Black & Decker matrix drill. The cherry is a very hard wood and the matrix
did a great job plunge cutting into it. Sadly the jigsaw attachment is terrible.
Even with a new blade it struggled to cut and burn the wood. I believe the angle is the issue
and that's why I love this rigid jigsaw I've had for years. It has a selectable blade angle
and finished the cuts flawlessly. Figuring out the compound bevels for the backrest and
toe kick panels made my brain hurt. Somehow a 12 degree incline and a 22.5 degree joint
worked out to five degrees. I don't use Sketchup but if it calculates that compound angle for you
it's worth learning. Satisfied with the final measurements I glued up the panels and began
scraping, sanding, cutting. Gluing up panels is my favorite part of any furniture build.
Nine more to go. Once those were dry fit into place I began milling the front pieces of seat
trim to cover the plywood edge. I used biscuit joinery and glue for a strong connection.
Now on to my least favorite step in the process, staining and sealing the wood.
I went through seven different colors trying to match the existing kitchen cabinetry.
I finally decided to use two stains in rapid succession and I think it closely matches don't
you? Also to match the existing cabinetry I applied a black glaze in all the perimeter edges
and wiped off the excess with a rag dipped in mineral spirits. Here you can see a panel propped
up against an existing cabinet for comparison. After staining and glazing it was time for a
polyurethane finish. I chose this wipe on poly with an applicator sponge and I loved the combination.
Little to no drips. So much better than using a foam brush. To attach the various pieces to the
2x4 frame I used a combination of glue, sprues and nails. Then with the breaker turned off
I wired in these new outlets with USB ports. Well it's time for the big reveal.
The color and design are a perfect match for this kitchen. So this is a really popular area for our
family to congregate in. We have lots of meals here and we really enjoy this space being built out.
Before this nook was here we had chairs going all the way around and with the kids coming in and out
they were slamming the chair against the wall and I was constantly painting or fixing that damage.
In fact one of my earlier YouTube videos was repairing this wall right here from chair damage.
So this has really made the space look more professional, look like it had always been here
and we're really happy with it. So in part two of this series I'm going to show you exactly how I
built these cushions which is noticeably absent from this video. If you found this video helpful
again would you give it a thumbs up maybe drop a comment below. I would really appreciate it.
Also consider subscribing. I work really hard to put out good quality content and there's more
videos to come. Now anything in particular that I talked about in this video I'll leave a link to.
Now full disclosure any of the Amazon links are affiliate links so if you click on them and end up
making a purchase it doesn't cost you a thing but I do get a small reward at the end of the month.
It helps to justify the time and the effort it takes to record a video such as this.
Until part two, thank you for watching.