MtiolHig Electric Pruning Shears (Uses DeWalt Batteries)

House On the Mend
25 followers
In this video I unbox, test, and review the MtiolHig Electric Pruning Shears using the DeWalt battery platform.
Amazon Affiliate Links:
MtiolHig Electric Pruning Shears: https://amzn.to/4pjOLSL
Camera Gear Used:
Canon EOS R6: https://amzn.to/3NfUvwk
Canon RF 15-35 2.8 L: https://amzn.to/3RWE5rI
Canon EOS R10 (B Cam): https://amzn.to/3MG8dXG
Canon RF 24 1.8: https://amzn.to/3oOtLJ6
Rode Wireless Go: https://amzn.to/3evlvcf
Video Chapters:
0:00 - Intro
1:19 - Unboxing & Overview
7:56 - Testing
13:17 - Pros & Cons
15:57 - Conclusion
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
Email me at: [email protected]
#mtiolhig #dewalt #pruningshears #pruning
Hi, I'm Mike with House on the Mend, and in this video, we are going to be reviewing the
Mutil Hig electric pruning shears that utilize the Dewalt 20 volt battery platform.
So let's get started.
Now, I'm not paid nor sponsored by this company. I don't want to try saying again,
although as you can see here, I did look it up to try to get the proper pronunciation.
I actually bought these shears with my own money. I was intrigued by the fact that somehow they can
get away with using the Dewalt battery platform and sure enough, it works seamlessly. So weighing
in at 2.6 pounds, which is lighter than my wife and daughter's smallest little dumbbell here.
This is a very nice option for folks that are tired of using hand shears. If they have any
issues with hand strength or arthritis, anything like that. So let's unbox it. Let's go through
all the features together, like what that beat means, and then we'll do some testing.
Wow, look at this foam insert. That is nice. All right, here's everything that comes in the
excellent packaging. You have the manual. We're going to read that a little later. I want to see
if this is at all intuitive based on a previous review I did on another electric pruner. You've
got a replacement set of the shears and then a grindstone if you want to hone or sharpen the
shears on there. Probably best to get it wet and then you have a couple wrenches for actually
changing the shears and you have a nice tiny little scabbard to protect the tip. Probably
for packaging but also for storage I would say. Okay, a very small little window about the size
of my thumbnail. We'll see what kind of screen information we get on that. Overall the build
quality is kind of medium. There's no sharp edges but you can kind of feel the plastic is
about what you would expect for a $45 tool. But what you wouldn't expect is this nice rubberized
grip area. I like that. This trigger here strangely has like a discoloration mark on it.
You know how super glue kind of discolors plastic? It's got that same kind of white chalky
discoloration. It doesn't really come off. Okay, the badging here is at least indented. It's not
just a sticker that's just put on. It's actually kind of underneath this plastic piece of trim so
that's kind of a nice touch. Let's grab just your standard Dewalt battery and see how it fits. This
is just a 2 amp hour battery with a full charge. Now here's our window. We have an on and off
button right here. Let's see if you can see that. Yeah right here and then one two three four. Let's
just press and hold that. We get a very loud tone and a little bleep. We get all four bars. I'm
thinking that might be battery life indicator although we also have it on the Dewalt battery
itself. So let's oh here we go. Here's our little screen. So it has all zeros on it for some reason
and then a battery life indicator that says full battery power. Now I would imagine that if you
press and hold the trigger it should engage and open up the shears. There we go. A double click
did it. Let's see if a double click closes them for storage. No. Maybe a press and hold. Oh look
I get a shear count. That's great. Now if I press and hold will it... there it locks it into place
so that you can then turn it off. Okay let's go over the adjusting of the
width of the blades from each other. So I have gone back and read the manual because I incorrectly
said these four hash marks down here might be battery life indicator when in fact they are
representing the opening size of the shear. So right now with four bars here we are at the
widest opening. If I press it once to go back to the number one and I pull the trigger for a moment
and then let it go you can see here it goes to a much smaller opening. Fantastic. That is
a really efficient way to cut small little branches. If you want it a little bit bigger
you press the button again. Here's the number two size. So from here to there. That's pretty good.
I think those two are are pretty fantastic for our uses. Here's number three and back
to the number four. All right the manual says that after three minutes if left idle the tool
will automatically shut down. It does not close the shears but it just stops and won't listen to
trigger input anymore. That beep you just heard however is sleep mode. So if you stop pressing
the trigger for one minute you will hear that beep indicating the machine has entered sleep
mode. To resume work you simply press the trigger. It says three times but two times actually works
and you're back in business. I'm not entirely sure why you've got both a one minute idle but
you can still get it going and then three minutes it'll just shut off but that is the feature.
Now let me flip it over and let's take a look right here. If you see in this picture I took
that center hole right here on the nut where you could replace the shears that is where you
lubricate. It says lubrication oil port. Now me personally when I lubricate it not only am I
going to put a drop through there because I think that's pretty cool for getting in here internally
but I'm also going to put some right out here where the two meet and it wouldn't hurt anything
to lubricate along the blades either. We're back in sleep mode. Now we're back awake. Let's take
it outside and start doing some testing. Well I have a whole row of these daylilies in our front
yard and they are just beautiful. I love them. Most of them have these beautiful yellow flowers
as you see in this picture here. Some of them have a really nice orange color to them. Nonetheless
when they're done flowering these large green stalks have bulbs on top of them that burst open
into these beautiful flowers and when you no longer see any of those like this and like this
they're done. We're also in September. It's actually September 11th. You can see the flag
in our front yard to memorialize that. Now you don't want to just cut them when they're green
because they are still using the sun to create photosynthesis to create and store that energy
down in the bulbs in the roots below. So you have to wait until they're dark like this
which means they've taken out all of that energy. So this is a perfect opportunity. I've got gardening
gloves on to open up and get ready to go with our shears and test them on these brown canes.
Now I'm looking down here and I see that we are at number four in width so I want to try
number one. So I select number one and give a longer than normal squeeze on the trigger and
now look we're very small. So that might be a bit too small so I'm going to go up to two.
There we go. All right I'm going to dig down in here and cut off that old brown cane. That's
very windy out here so I hope you can hear me all right. All right I'm going to go grab a bucket
and do all the rest down this row. Interesting so when it goes to sleep
if you don't touch it for a minute and you give it that double click
it resorts back to the widest opening. I wouldn't have thought that. Let's go back to two
which I like for these. Much better. Well this little privet is called the golden ticket and
isn't it cute? But the tips here suffered really badly over last winter. Here's a picture of the
one I planted at the same time out in our front yard and as you can see it's thriving. So let's
trim back all these little wispy branches and for that I think we should go right to the number one
setting. That's four. Two. Here's one. There. Okay. Well this could certainly even be
smaller for these little ones but I find the speed to be really good. There. Much better.
Now this little dogwood is suffering from the same thing. Look at all this stuff that couldn't
survive the overwintering even though it's meant for this zone. Now I didn't touch this for a
minute while I was setting up the camera and moving over here and what do you know it's beeped and so
now when I reactivate it it's going to open back up to a size I don't want. I wish that wasn't the case.
There we go. Now these are much bigger than anything else I've worked on. Very woody. So
let's see how we do. Yeah no issues at all cutting through this thicker woody material.
It's doing great. Interestingly every time you turn on the shears the count goes back to zero.
Not disconnecting the battery just simply turning the power on the count goes right back to zero.
So I don't know what the point of that is. That's a very heavily edited down version of two days
worth of testing which is more than enough for me to give you my pros and cons. First the pros.
So the size, the weight, the balance, and the build quality are all really good. This plastic
is obviously a step down but when you consider that the actual ryobi tool that looks like this
it's like a drill that melted that they stuck shears on is $125 and these are just $45. I think
the build quality is excellent. Second would be the battery life. So all that testing we did
didn't even start to register with this Dewalt two amp hour battery. One of the smaller batteries
that they make. So I think you could go on forever. It's only doing this small amount of motion.
So great battery life. Also I always consider the battery platform when reviewing a non-name-brand
tool but in this case I don't know how they get away with it but they are utilizing the Dewalt
battery platform and there's tons of tools out there for that. So that is also a pro. And lastly
would be I love the fact that it has the four different width opening settings. Now that brings
us to our first of only two cons and that is regardless of whatever spot you like and you're
using if you step away from the shears or if you're moving to another spot and they're not
used for a minute when you either turn the power back on or when you just get yourself with a
always reverts back to the full opening. I wish they could go in with a little bit of software
change and fix that because it would be great if it would just leave it at the last place that you
use. Plenty of tools will revert to that. My camera here always reverts to the last settings that I
used. And the second con would be this little tiny display here. It resets the blade to the
cut count every time and it has the other thing on it is the battery life indicator which you have
right on the battery readily accessible in the back. So it really it serves as no function and
I think they ought to remove it. It would get their unit cost even lower for consumers. So if
you found this video helpful will you please give it a thumbs up. It's very helpful to the channel.
Also please consider subscribing. You know I work really hard to boil down the information I think
you need to make the most efficient tool review videos and it's very helpful to the channel as
well. It's free. All you do is log into your account on Rumble or YouTube and just click
subscribe or follow. It's super helpful to me. I'm going to leave a link for this very item right here.
Full disclosure that will be an Amazon affiliate link. So if you click on it and do end up making
any purchase won't cost you a thing but I do get a small reward at the end of the month.
Now they also make this very tool in different colors for Makita or Milwaukee batteries as well.
So if you click on the link I have for you for this tool you'll see at the bottom other types
of battery platforms they support. Now a quick note before I end the video. It is not lost on
me that this has been a very heavy week what with the September 11th attacks and also the murder of
Charlie Kirk. So if you think I'm oblivious to that I'm not. I'm just trying to provide
an escape from that for this week for my viewers that are gardeners and I think this is a very
helpful tool for them and I wanted to recommend it to them. So please excuse me if I seem happy
and jovial. My whole family has been very sad and this is a great escape for me. So if you made it
this far in the video will you please put a comment down below that you understand or you can
appreciate that. Or if you put in a comment that says something different I'll know you didn't make
it to this point for my explanation. In fact listen to me I'm getting all broke up now just
trying to keep my words together. Until next time thank you for watching. All right why am I
why am I getting a wet butt? All right let me sit down.
Pros and cons. Let's start out with the pros. Let's just turn this off. Okay.
