In today's video, we'll fly the Bonanza up the coast during sunset, talk about what's been going on with my Cessna 140A, and take an inside look at the maintenance process to fix my engine. Special thank you to my good friend and A&P Cameron O'Brien (Instagram: @slip.it) for helping me complete this project!
Thanks for watching!
Route: KCMA KCMA Maintenance filmed May 2024, Flight filmed July 2024
Editing removes context & this video should not be used for instructional purposes.
If you're new here, hi my name is Stevie. I fly this 1949 Cessna 140A and this 1952 C-35 Bonanza
and if you're not new here you know that I haven't filmed a new video in almost a year.
The last video I posted was flying this airplane from California to Oshkosh which was an amazing
trip but the reason I haven't posted in almost a year is because of this airplane too. It's been
giving me a lot of problems so we're gonna take my Bonanza and go for a quick sunset flight up
the coast and talk about what has been going on with my Cessna 140.
Since we've been in the Bonanza, hasn't it? Seatbelts on, doors and windows are latched,
circuit breakers are off, our electrical switches are all off except for our beacon
and our avionics master is off. Open our cowl flaps, carpet is off,
mixture is full rich, prop is auto, full forward, throttle, two-ish turns,
all right let's fire her up.
Terrain system test okay.
Camarillo ground Bonanza five niner two one charlie at the east end of the Zulu ready to
taxi for a right crosswind departure. Bonanza five niner two one charlie Camarillo ground
runway two six taxi via golf alpha. Two six via golf alpha five niner two one charlie.
It's a beautiful night to fly tonight. I already flew the Bonanza once today so
we're very well acquainted at the moment. I haven't even done that much flying in the Bonanza
lately because it was down for annual for a little while. Feels good to be flying this
airplane again. All right let's do our run-up. Back of the Bonanza. All right we are parked in
the run-up. So we have fuel selector, we're on the left tank, fuel quantity,
we've got just under full on the left and full on the right. We'll check our flight controls.
Free and correct, trim is set for takeoff, mixture is rich, prop is set to auto, full
forward and throttle is going to come up. There's 19. We'll do our prop check so over to manual and
down. Looks good. Let it come back up on its own and in the meantime oil pressure is good, oil
temperature is good, fuel pressure is good and fuel flow is good. Bring it back to 1700 and do our mag
check. Nice drop. Back up. Perfect. All right and we'll pull it back to idle. Beautiful. Put this on.
I don't know. Outside air temperature. Why not? Flight instruments checked and set. We've got no red x's.
Our altimeter is set correctly. We'll just bug in.
3,500 feet for now. Radio transponder is set. We've got in tower. Flaps are set. They are up and the
switch is in the neutral position. Doors and windows. Just another double check. Lights are
going to come on soon. Gas is on the left tank, undercarriage light indicator, mixture full rich,
prop full forward, auto and seatbelts just as locked. So like I said we're just going to go
up towards the coast. And see what's going on. Check out the surf. Now we wait.
Envision at four runway zero, discard the departures. You can turn base when able.
Okay we'll do it now. Thanks for four runway zero. Camarillo Tower, Bonanza 59021 Charlie,
holding short 26, ready for departure. We'll be a right turn out for the north.
Bonanza 59021 Charlie, Camarillo Tower, roger, stand by. Bonanza 59021 Charlie, runway 26,
cleared for takeoff, right crosswind, 59021 Charlie. Left traffic on the go, do you think
we'll keep up? All the way full throttle. Airspeed's alive. Temperature pressure both is
in the green. I'll start that crosswind now, 3 November Delta. There's 65. Positive rate,
gear's coming up. Camarillo Tower, 427 Delta Papa, inbound with information zero.
427 Delta Papa, Camarillo Tower, make right traffic, runway 26.
Make right traffic, runway 26, 427 Delta Papa.
November Delta squawk 1214. 1214, 3 November Delta.
3 November Delta, number 3, follow a cub on a one mile final, runway 26, cleared for the option.
Number 3, runway 26, cleared for the option, 3 November Delta, we're gonna on the go,
we're gonna go right crosswind departure. 3 November Delta, roger, on the go,
right crosswind approved. 21 Charlie, green change approved. See you later, 21 Charlie.
Have some pressures all look good. We'll go ahead into heading mode,
we'll do indicated airspeed and heading, and we'll go ahead and turn the autopilot on. I'm
gonna give us a little bit faster of a climb actually. So soon we'll be coming up on Sataquai,
we'll make a little left turn out towards the coast and see what's going on. So what has been
going on with my 140? Because I haven't posted a video in a really long time, a new video,
like filmed recently that is. And it's mostly because my 140 has been having a lot of problems
starting pretty soon after Oshkosh in the fall. And you're probably thinking, Stevie,
why didn't you post a video in your Bonanza? Like why? You know, you have two airplanes for
a reason, right? Like what are you doing? The reason being that one, the maintenance process
for fixing my 140 took up a lot of my time. I was basically working my job 9 to 5 and then
going to the airport to try and fix this thing with my mechanic. I'm not a mechanic,
but I really do enjoy learning about things. And what happened to the 140 did honestly kind of,
it definitely made me a lot more nervous of a pilot. And I'm already a nervous pilot,
so I didn't need to be any more nervous, like truly. I'm very cautious in everything that I do,
but what is it that happened that made me feel that way? I'm gonna let the plane speed up a
little bit and kind of put us into a little bit of a faster climb here. We'll get some air into
the engine. After I flew my Cessna 140 to Oshkosh, I brought it to Michigan for a little
while, which is where I'm from, and I decided to bring it home in the fall of 2023. And while I
was flying it home, I unfortunately had some engine roughness that caused me to divert to
an airport. All right, we got a thousand feet to go. Essentially what happened with the engine
roughness was I was just cruising along. I was close to one of my fuel stops that I was going to
and the engine lost about 100 to 200 RPM and started shaking. And it was kind of intermittent.
It would start and stop, start and stop. But I did elect to divert to a different airport,
landed without issue. The vibration went away when I pulled the power back. I obviously did
everything that I was trained to do. When I felt the vibration, I turned towards the nearest
airport, tried to pull the carpet on and left it on, messing with the mags. Nothing I was doing
in the plane at the time when it was getting rough was solving the problem. So I did decide
to divert. I had two mechanics check it out. One was just a local engine shop and the other was
actually a 140 mechanic that flew in to take a look at the plane and neither of them could find
anything wrong. It ran perfectly on the ground. So I airlined home and my friend Colin was nice
enough to ferry the plane down to Wichita where it would be put in a hangar. So flew down to
Wichita with no issues and it was kept there until Graham was going to go pick it up. So he
went to go get the airplane. And unfortunately when he went to go pick the airplane up, it was
exhibiting some other problems that were kind of new. It was experiencing a lot of power loss
on mag checks, like we're talking six to seven hundred rpm drop on a mag check. It was different
from the original issue that I experienced, but the mechanics of course did not want to let the
plane go until that problem was fixed. So we tried everything. We thought it might be a stuck valve,
we thought it could be the mags, we thought it could be the induction system, and we went through
basically everything that we could without removing a cylinder. So we reamed the valve guides, we
found out that the mags were arcing, and got those repaired. We checked the induction system probably
about five times to be honest. So I mean we went through everything. Spark plugs, mags, valves,
carburetor, and the issue with the mag drop actually ended up being a nozzle on the carburetor. So that
issue was fixed. But in the process of trying to find that, we went through nearly everything on
the plane trying to figure out what was going on with my engine. We replaced the spark plugs,
they looked at the oil filter, they did an oil change, they bench tested the spark plugs,
they reamed the valve guides, they replaced the valve springs because actually one of the push
rods was like slightly bent. So that is kind of the first clue to what this ended up being,
kind of. And eventually when they had fixed everything, Graham flew the plane home. The
plane was actually stuck in Wichita for about three months. So it was there for a while. It was
there from basically late October to beginning of January. So in January, Graham flew the plane
back when it was all fixed and it flew back completely fine and brought it back here. I
started flying it again and I was so excited to have my plane back. Unfortunately, very shortly
after the plane came back, the issues started happening again. Basically what would happen
was the plane would take off just fine, it would make static RPM, no issues on the ground. There
were no ground issues. And then once you would get into cruise flight and the plane would
accelerate past static RPM, it would start to run rough. And I'm kind of thinking, you know,
maybe this is carbized. It's pretty humid here this time of year, the temperatures are low,
like it could be carbized. And when you'd pull the carpet, the engine would get smoother for a little
bit, but it wouldn't last very long and it just didn't seem like it was actually fixing the
problems. And we also discovered that this issue was only happening when the plane was like
accelerated past static RPM. So if you pulled the nose back up to get the RPM back to less than
2,300, it wouldn't be rough anymore. So it was like only happening when the plane was
accelerating past static RPM. So like to 2,400, 2,500 RPM, which was super, super odd, which was
kind of our indication that it wasn't carbized. We went through everything on this. If you're an
airplane owner or you rent an airplane and you're watching this and you feel like something isn't
right with your airplane, take this as your sign to trust your gut because there probably is
something that's not right. Definitely, you know, don't discount what you're feeling because what
my issue ended up being was much bigger than carbized. Also, it is a beautiful night out here.
I'm so glad we went flying. And I think we're going to go ahead and turn back here shortly
because we're getting to the oil pier, which is typically our turnaround spot before we
get closer to Santa Barbara. So let's go ahead and make our left 180. So we kept troubleshooting.
We kept troubleshooting. We were doing compression check after bore scope, after oil change,
after, you know, anything we could literally possibly do that could be wrong with this plane.
And we basically narrowed it down to either being a bag issue or a cylinder issue, you know,
maybe a stuck valve or something like that. The compression checks were always fine, high 70s,
like nothing was wrong, but we also had just rebuilt the bag. So we were like, I don't think
it's a bag problem because we had just rebuilt the bag. So couldn't be a stuck valve. We just
read the valve guides. It can't be a carburetor issue. We just replaced the carburetor, had the
checked. Can't be a bag issue. We just did the bags and the bag check is fine.
So what could it be? Unfortunately, if the issue is only reproducible in flight,
I didn't want to keep trying this out and testing it and seeing if it were something in the engine
that was going bad, it could cause an emergency in flight. So we did decide to do a top overhaul
on the airplane, which is where you replace all four cylinders. Wow. That thing is dirty.
You guys as baffled as I am. Nice.
This just looks wrong. So we've been here a while tonight and the plan is tomorrow to come here
somewhat early. All the cylinders are off down here in the 805 box, of course. And then we have
all of our parts over here, but I'm actually pretty pleased with how clean we kept the hanger.
All of the mess is contained to this one square. So I think we did pretty good.
New gasket. We're going to install that too.
The trick is I want to be able to get the pin out without unzipping the ring.
One down, three to go.
That's your $9 piece, so it better look good. I think you put it on upside down.
Yeah, probably. It's a mess.
Hey, Stevie, what do you think of the new cylinders?
I painted them myself.
Oh, wow. Motor it for 10 seconds.
Cameron and I were just talking about how smooth it looks and how smooth it sounds
compared to the old one. Oh my God, it sounds so much better. It sounds really good.
And for our brave test pilot. Thank you. Amazing.
Luckily for us, the top overhaul did fix the problem. I can't thank my friend Cameron enough.
We put four all new cylinders on the airplane and we ended up finding a stuck piston ring
on one of the cylinders and a lot of valve guide clearance issues, which
ultimately we believe were the cause of my engine roughness.
The plane ran great after the new cylinders. The new cylinders completely fixed the problem.
So I'm really glad that my $7,000 decision to do a top overhaul was right. This engine
only had 700 hours on it and the cylinders as well, and it wasn't a super old engine.
So I really didn't think that we would have to do a top overhaul this soon.
We started flying the airplane on a lot of cross country hours to break it in.
Unfortunately, 12 hours after the top overhaul,
we ran into another problem on the plane that was even bigger than the first one.
So that is what has kept me from posting on YouTube for so long.
It was a gorgeous, gorgeous evening. I'll give you guys a little panoramic view here.
Wow, that is beautiful.
So long story short, I'm excited that the top overhaul fixed our problems,
but unfortunately the fix did not last very long.
And we ran into another even bigger problem after the top overhaul.
You guys will have to wait and see what that is because it definitely deserves its own video.
You'll see. And I am really excited to start filming again because I have missed it.
I have missed all of you watching my videos.
I can't thank you all enough for sticking around and waiting for me to post again.
Thank you guys. I really hope you enjoyed this sunset flight
and I hope that you enjoyed hearing about some of the maintenance problems
we've been having with the 140.
I actually really do think that the maintenance side of flying is extremely interesting
and I think it's especially useful for vintage airplanes.
I know more about engines now than I ever have in my entire life.
Sun is setting. I think it's time to head back to Camarillo.
Camarillo Tower, Mission November, time is 02550, wind 280 at 4, visibility 10, sky is clear,
temperature 21, dewpoint 17, altimeter 29.904,
landing and departing runway 26, advise initial contact, Mission November.
Camarillo Tower, Bonanza 5921C, set a quick bridge to November and send full stop.
Bonanza 5921C, Camarillo Tower, make right traffic, runway 26.
Right traffic, 26, 5921C.
Let's take her back in.
We're a little high, so...
Cessna 7ND, number 3, follow Cessna just south of the tower,
runway 26, cleared for the option, on the go, make left, close traffic.
7ND, cleared number 3, looking for traffic south of the tower.
Bonanza 21C, number 4, follow a Cessna just north of the approach end, runway 26, clear to land.
Number 4, looking for traffic, runway 26, clear to land, 5921C.
Evening, Sling 8020C, holding short 26 at alpha, ready to go for a VFR departure to the west.
Sling 20C, Camarillo Tower, roger, hold short, runway 26, arriving traffic.
Short 26, 8020C.
Let's get the ear down.
This is 7ND, traffic right now is a sling.
There we go.
Props come back, pull forward.
Heads on auto.
Insight, 7ND.
Gas is on the left, take a left turn to the left, indicator.
7ND, traffic one mile to the right.
7ND, 8020C.
Number 21C, traffic, follow short final.
Insight, 21C.
Cool, we'll get some flaps in.
TACOPS 054L, number 3, follow a bonanza north of B&B approach end, runway 26, clear for the option.
There we go.
Number 3, following the bonanza, 054L.
Gas is on the left tank, under carriage light, indicator.
Fixtures full reach, prop pull forward, auto seatbelts just locked.
We'll throw on the taxi light, just to be dramatic.
All of our lights are on.
We're clear to land.
Gear's down, gear's down.
Gas is on the left tank, under carriage light, indicator.
Fixtures full reach, prop pull forward, auto seatbelts.
Number 20C, bring change group.
Change group, good day, 8020C.
Throttle's all the way out.
Number 7ND, make a right 360, abeam the tower.
Right 360, abeam the tower, for 7ND.
N21C, beautiful.
N21C, left of B and say parking.
Left of B, we're going to the east end, 5921C.
N21C, maintain the frequency and taxi east end via B foxtrot.
East end via B foxtrot with you, 5921C, have a good night.
Thanks, you too.
All right, we're just going to briefly stop here.
Flaps not geared, cowl flaps are coming open.
Landing lights off and trip is going to be set for takeoff.
Well, I hope that you enjoyed our little sunset flight
and I'm really looking forward to filming some new videos.
I'm honestly really grateful for the experience that I got
both in handling the rough engine situation
and also with the maintenance.
I have learned so much throughout this process.
The next video about what went wrong next with the Cessna 140
is unlike anything I've ever done on this channel
and I'm so excited for you all to see it
and I hope that you love it.
Thank you guys for coming along
and I'll see you on the next flight.
Hopefully a little bit sooner than this last one.