Cavorite X7: Transitioned from Design to Manufacturing | FLIGHT/PATH - Episode 11

Aviation Technology
1 follower
1 Video View·Mar 22, 2026
The Cavorite X7’s outer mold line (OML) has been refined since its initial design to elevate safety, aerodynamics, and cruise performance. These changes will optimize the aircraft to perform the long-range, high-speed missions that the Cavorite X7 was designed for.
Our Flight Controls Engineer, Faraaz, and our Chief Aircraft Architect, Brian, discuss the OML refinements and how it’s now locked, which has transitioned us from designing the Cavorite X7 to manufacturing it.
AI Generated·May contain errors
The OML, or outer mold line of the aircraft, really defines the exterior shape of the aircraft,
including all the aerodynamic surfaces, and it really gives us a shape to work with when
we're starting to do CFD and computational fluid dynamics simulations and trying to define
the aircraft performance.
The current revision of the OML for the X-7 underwent significant changes, and some of
them are quite hard to see from just an initial glance, but really it's about improving the
aerodynamic performance of the aircraft, so reducing drag at our target crew speeds, which
leads to increased range and payload capabilities.
It also was heavily focused on improving the static stability of the aircraft, and that
really comes down to the improved safety case for the aircraft, and making sure that the
aircraft is more robust to any failure conditions that could happen, and so that was a big focus
of our OML revision.
We made some refinements to the X-7 OML based on performance and safety, and manufacturability.
Again, at the end of the day, you have to build the safest airplane in its category.
It has the best uptime, and it has to be maintainable, so you start to look at things like that.
For instance, if you look at the old drawings of the X-7, they had two fans per canard.
We did a lot of work on that, realized we can do one fan per canard, and still meet
all our safety goals on it, but it does improve the cruise performance of the airplane.
It's a smaller footprint.
Well, the OML and locking it down is really key to making future progress on the full
scale.
Now everybody knows what the physical limits are of what they're doing, and they can make
the real world decisions they need to make to optimize the design.
The OML design really is helping us create a lower drag and a faster vehicle that can
well-optimized cruise missions that have long ranges, higher top speeds, with more payload.
That's really what will enable the X-7 to carry out its mission successfully in a better
way than a lot of helicopters that exist today.
That's kind of where we see the primary benefit of this architecture.
The OML design really helps drive that mission.
