A BETTER way to tie in a PEEP!

The Ancient Longbow Legacy
8 followers
3 Video Views·Jan 13, 2026
All right guys so you guys have seen me do videos on YouTube of tying in peeps before
and I've kind of tied them in the same way my entire life. It's been just a fail-proof way
to do it right. Wrapping above going down one side over the peep down the other wrapping below
doesn't move. The problem now is now that we're using peep tuners and things to help micro tune
our peeps in order to use them tying in a peep that way I have to put my bow in a press. So I
found a new way to tie in a peep. I'm definitely not the first person to do it this way but it's
a really good solid way to tie in a peep and you can still use peep tuners and all that stuff. So
I'm going to show you exactly how I do that now. The first thing you're going to need two strands
of serving. I'm using 14 thou halo from BCY. Like I said in other videos I use it for most everything.
What I'm going to do is wrap it around the peep on one side and I'm going to tie a knot right
against this side. Make sure I got an even amount. I'm going to tie half of an overhand knot there.
I'm going to come around just like this and tie on the other side the same way except once I see
I've got an even amount I'm going to finish that double overhand knot on this side. Since you're
and then this side I'm going to finish this knot over top of the other strand. It kind of ties them
both together just like that and sometimes I'll even add in another one. It doesn't hurt but
I'm going to do it in this video just for the sake of doing it. So now what I'm going to do
I'm going to take this. The important thing is you're running half inches. You're going to run
is to keep it going in a consistent direction. So I'm going to go down through the peep
back up tie a half inch all the way against the knot just like that and I'm going to keep doing
that until I'm up about level with the top of the peep. So let's get some wraps done right here
two three four five six seven eight nine and ten. So I'm going to leave that there
now I'm going to come back down the other way and I like to go the opposite way on the bottom. So
I'm going to go up through then through the half hitch all the way against the knot and I'm going
to do that ten times. So then I'm going to go right here once I have that I'm going to cut it
leave about a half an inch do this like a finish on all my serving. I'm going to burn that down
flat let it burn down and mash it so it mushrooms out can't pull through. Same thing with this one
mash it flat and that is one side completed. Now I'm going to do the exact same thing
on the opposite side. All right so that's completely tied in one thing I do like to
do on this this knot just to make sure none of these half hitches ever come out
is I'll take and run just a tiny bead of glue on that ridge that spine and just rub that in
and that way you never have to worry about any of that coming undone in the field.
I don't think it's necessary just another step I do I'm big on preventing problems
and so I do that but you can see right there it's honestly a very clean sleek way to tie in a peep
that's literally never going to go anywhere and now I still have the ability to take a peep tuner
above or below and slide it into the string so just a new way to tie in a peep.
