Here’s a video showing you something that’s easy to see and easy to fix but has a HUGE impact and accuracy. Nock pinch is a serious problem and there’s many reasons why. Although there’s tons of options out the for arrow nocks they aren’t all the same. Different brands have different thickness, different throat depths and different stiffness in materials. Your bow may have been set up one way for a nock you had at the time and it worked great. But what if you change to a new arrow brand, a lighted nock or change your string and have a new loop??? The answer is you could be affecting your accuracy for the better or for the worst. This explains it really quick! What’s important for this videos isn’t to explain what nock may or may not be better, what matters is, DOES YOURS FIT CORRECTLY??
Comments are disabled for this video.
Here's a small detail about arrows
that'll make a huge, huge difference.
So let's watch these two arrows.
See what you notice.
I'm gonna let that down.
This time I'm gonna shoot.
Watch this one more time.
All right, now, watch this one.
You see it?
Did you see it?
It's in flight too.
All right, here's what I'm gonna talk about.
What I'm gonna talk about today is knock pinch.
So if you rewind that, take a look,
you'll notice first arrow, drew back, nothing.
Or first, second draw, nothing, right?
It was nice.
Third draw, new arrow.
Did you see the arrow lift?
Then when I did it again, did you see the arrow lift?
So this all comes down to your knock fit.
And when you have different arrows,
you change to a different arrow,
especially if you change to a different lighted knock,
you need to pay attention to how that knock fits
between your two knocking points or your D loop.
This is what's referred to as knock pinch.
Because as you draw back and that string makes a triangle,
it'll start to pinch it.
If the new knock is a little bit wider or taller,
depending how you look at it, then another knock,
then what'll happen is it'll squeeze it
and it'll lift it off your rest.
This is such an accuracy killer.
It's a huge accuracy killer,
especially when you start to shoot downhill
because when you start to go down,
it'll literally lift right off the arrow rest.
So here's a couple different knocks.
These are all just different lighted knocks.
So some of them, I actually love the design
of the lighted knock, but it does make me retie
my knock points to where there is a little bitty space
in there so that as this thing comes to full draw,
it's not squeezing it so tight that it's lifting it off.
So let me show you a few differences here.
So here's one, and it's got some ability for movement.
It's pretty tight, but this would be,
because it has the ability, you can see here,
it's actually dished out.
It has the ability to do that, okay?
Here's another knock.
It's actually same brand, just different style.
So this one also has a little bit more space right here,
okay?
Now another knock, which I actually really, really like,
when it goes in, it just fits much tighter
between those knocking points.
And you can see even halfway through,
it's already pretty much tight enough
I haven't even snapped it on.
So that's the difference on that first arrow
that I drew back and the second arrow that I drew back.
The only difference is how that knock pinches
or how your knocking points pinch.
So what you wanna do is you wanna be able to have a knock
that when you put it on there,
you wanna have a little bit of space,
just a touch of space there,
so that when you come to full draw,
it takes that gap away so that the arrow doesn't have play.
You don't want too much play,
but you also don't want it pinching
to where it lifts it off the rest,
like I showed you in that first one.
So I'll do that one more time here.
I'm gonna show you the difference.
So let me put this knock in
that is just a little bit too tight,
and you'll be able to see the difference here.
And again, this is such an easy fix.
All you have to do is make sure
that you have about a half millimeter
to a millimeter of space,
and I like the space underneath the knocking point
so that my top knock,
the arrow's always against that top knocking point,
which really is what I always set for my height,
and then the slack will come up from the bottom.
So here's the simple test for you to do.
Draw back, and if you see that arrow lifting off the rest,
just like that, you see it lifting off,
then what you need to do is you need
to get those knocking points repositioned.
And listen, this is something that can easily happen
as this serving gets wear and tear,
as it gets hot in your car.
You're pulling from above a center position,
so it's naturally pulling up all the time,
and as that serving starts to break in and wear,
it can start to pinch.
Such an easy thing to look at.
You can do the same thing pointing down.
If I pointed down with that same thing,
it would lift much higher off the rest
and a whitetail stand, 100% an accuracy killer.
Such an easy thing for you to look at.
Check your knocking gaps based on the knock
that you wanna take out with you hunting.
Totally change the game and your arrow flight.
Good luck.
I just walked down to get these arrows,
and I wanted to show you this too.
So there's the difference.
First arrow flew good.
I told you it was in the middle.
There's the second arrow,
and you can see a little low, a little left.
It also had a little bit of wiggle to it.
So it's critical that you check
how your knock's being pinched,
because it will definitely, definitely, definitely
affect your groups, affect your arrow flight.
If you're shooting a fixed blade head,
it'll magnify that inconsistent flight.
So be sure to check your pinch.
It's the easiest thing to do before going out to season.
It's a simple fix.
It'll totally change the game too, I promise you.