How To Clean A DIRTY FLUTE

Learning Flute
8 followers
#Education #music # instruments # Flute # Orchestra # instrument demonstration
How's it going everybody? So today we're going to talk about how to clean the flute.
So today we're going to talk about cleaning the flute. How you clean it, the exterior of it,
when you get little brown spots, or you get a little bit of tarnish, or if you, you know,
it's generally a little bit dirty. Now there's two ways of cleaning. There's the regular tarnish
cloths, which look a little bit like this. They usually have these little brown little markings
on it because it removes tarnish. And then there's the polishing, which is this microfiber type of
cloth that you can get. You might have both of these inside your case. You might not. You might
have one or the other, but we're going to go through both of the ways to use them. So we'll
start with the tarnishing cloth. Tarnish cloth, you want to start on the tarnishing side. If you
want to find out which one's the tarnishing side, just rub a little spot where you see some
some gunk and see if it rubs off. If it does, that's the tarnishing side of the cloth. So
you want to take your head joint and clean a little bit at a time in a circular motion,
nice and round. Try not to get the crown here. Clean the inside a little bit with
your finger, the little mouth hole. And you want to just go in little motions like that.
And usually that gets it nice and shiny again. Look at that. Pretty much nice and shiny again.
You can get to a certain level. You don't have to do it too much. Just a little bit here and there.
Don't overdo it at all. As you can see, look at that extra tarnish that just fell off of it.
Now with keys, it's a little bit more tricky. What you want to do with keys especially,
is not to go rubbing side to side like this at all. If you're going to rub the keys at all,
you want to rub back and away. So this way, then that way, not this way or this way. Because you
don't want the small mechanisms to scrape back and forth and then cause a lot of play and then
make your flute go into repairs a lot faster. So you want to do that just back and forth,
and back and forth, and back and forth. Don't press down too hard on the keys.
Just very gently, just as you would if you were playing on the flute, just a little bit.
And then clean like that. Same here around the G key, G sharp key. Same thing, just lightly
press on it. Try not to clean too much over the ribs and all the piping here. Just lightly go
over it. It doesn't need that much at all. Just lightly go over that and then the other side of
the keys. Now the tubing, same thing as before on the head joint. Just rub nice and on it
over and over. Get all that black gunk off of there. And yeah, that's how you use the
tarnish cloth pretty much. And just go over with that on the tarnish cloth. Then you take the
tarnish cloth away and you're done with that. Now with the polishing cloth, it's usually the more
daily type of cloth that you should use that generally just gives it a nice little shine
again, nice little clean. It doesn't necessarily take off any tarnish, but what it does is just
cleans off all that gunk that's on the flute. And it's a very, very useful little item to have.
Feels good too when you have it in your hands and cleaning it like that. And it gives it a nice
little shine, keeps it all in nice good working order, no debris around the pads, stuff like that.
Same motion again, always going this way and not that way when you're cleaning the keys.
So I hope that was helpful. If that was helpful, let me know down in the comments. Be sure to like
the video if you liked the video. And let us know down in the comments what other video we can do
about maintenance for the flute. Until next time guys, thanks for watching.
