Eagle Industries: Multi-Mission Armor Carrier

Ballistic Lab
1 follower
1 Video View·Jan 3, 2026
Eagle Industries: Multi-Mission Armor Carrier
Alright, next up we're going to look at the Eagle Emac Gen 2, I believe.
This is the commercially available one off of their website.
I got mine size medium.
I don't know if anything of any value actually changes between the sizes, but I just want
to throw that out there.
Alright, so if you're a fan of 1694 style vests, this is going to be right up your alley.
It has basically all of the same features that you're used to, with maybe some small
differences in the details themselves.
So up front you have a kangaroo pocket, which looks like it's set up for 3M 4 mags, however
it's actually set up to take an insert, and then it comes with the bungees so you don't
need them.
You can put just a standard elastic insert in there and then you've got bungees separate
from that.
So there's no division inside of this pocket, which leaves it open for sub gun mags or dual
7.62 mags if that's something that you want to do, but they say it fits 3M 4 mags, which
it does.
You just got to drop in an insert.
For reference, it is hook on one side and loop on the other, specifically loop towards
the body, hook away from the body, so that you know what insert will fit in there.
Moving up towards the chest, you have some cable routing and push to talk connection
points, which is awesome.
More of us need to include that, as well as an integrated admin pocket.
Now there's no depth to this pocket, but there is a line of elastic retention on the body
side that is sized for chemlights or pens and pencils and whatnot.
So it makes a good map, quick reference card, writing utensil, and maybe some chemlight
pocket.
You're not going to fit anything bigger than that in the elastic, but that's not to say
that it won't fit in the pocket itself.
Moving on to the cummerbund, you have a very 6094 style cummerbund, which will fit a 152
in the internal pocket.
What I thought was a little odd was the retention is like gutted paracord, it has no stretch
to it, and there's only enough there to fit the base model 152.
If you step up to 152 alpha with the GPS antenna on the back, you do not have enough cable
there to get the snap put over it.
Now I would probably change that out for shock cord anyways, but it's just something to keep
in mind that it's not going to fit a 152 alpha the way it sits.
Immediately behind that you have a side plate pocket, which I'll open up and I'll show you
guys how that works.
All right, so real quick, looking underneath the flap of this, it has conventional Velcro
pattern with loop and then hook on the flap, because remember KDH sucks and they want to
be different, but Eagle is the industry standard.
They've got nice pull tabs on the cummerbund flaps themselves.
And then as we move over to the cummerbund itself, you can see there's a radio pocket
in here.
There is a divider in there to keep it separate from your side plate.
There's the padding along the bottom to catch the edge of the radio and the edge of the
side plates, which if you're stepping up to a full bodied plate carrier like this, that's
a pretty awesome feature to have.
And then your side plate pocket is right behind your radio.
With this flap, it'll fit both 6x8 and 6x6 issued side plates with enough height to come
back down and secure over the side plates.
You don't have to worry about that thing not actually fitting issued side plates like sometimes
happens with some of these aftermarket carriers.
Moving up to our shoulders and adjustment here, it is a pretty standard single loop
of webbing that runs through a rear D-ring and comes back onto itself, so you have plenty
of adjustment there.
If anything, you might need to just roll up this end and kind of tape it right there.
So if you had it super, super shrunk, you might have a little bit of bulk from trying
to secure that.
It comes with their Assault style shoulder pads, which if we're going with something
other than the Core Ice Vents, this is my favorite style out there, where it's got a
nice big body to it so that you can run cables through there and it's not overly taut against
the shoulder strap.
It also has their Velcro on elastic loops there for better or more routing options.
And again, these are a tri-fold design.
They're also lined with some loop, so if you needed some sort of shoulder armor because
you were using it for an entry vest or something like that, you can attach it right there.
There is also an internal elastic cummerbund just to give you a little bit more retention
to your body there.
The only complaint I have against this is there's no way to avoid having hook up against
your torso, so you're definitely going to want to get a piece of loop to just cover
that and protect your uniform, probably combat shirt from wearing out before it's due.
Moving around to the back, it does not have zippers on it.
I apologize, I should have pulled those off.
That's my zipper adapter for the Turtle Assault Pack, but it does have a full MOLLE field
with Velcro on the top four lines, as well as a drag handle.
The Eagle drag handles have never been super robust, so it's more of a carry handle than
anything, but it is there and it might work in a pinch.
We've got some more cable routing towards the top of the plate bag here.
And then you've got your cummerbund pass-through on the bottom.
The cummerbund pass-through is lined with loop Velcro, so you might be able to use a
Velcro-secured cummerbund in there if you wanted to switch it out for something aftermarket.
However, it has the traditional Eagle-style cummerbund, where you've got the elastic webbing
and then the eyelets for some shock cord in the back there.
I've never had a problem with that style of cummerbund.
It takes a little bit longer to set up initially, but once it's set, you've got some good stretch
if you need to go over a cold weather layer or whatnot.
It works out fairly well.
The plate pockets are fairly straightforward on this thing.
No gimmicks going on here.
They secure towards the body side of the bag, and there's just one pocket there for your
plates and any soft armor backer that you might want to throw in there.
There is some padding built into the vest.
It's a very, very comfortable rig, and it definitely justifies stepping up to a full-bodied
rig.
And then looking internal on this thing, real quick, you can see that there are mounting
options.
There's loop Velcro along the top portion of each plate bag, as well as a row of webbing
for mounting groin panels and whatever else you might need to there.
So that is the Eagle Industries Gen 2 MMAC.
I don't know how different it is from some of the issued versions out there.
I haven't followed Eagle super closely in recent years, so I know there's a little bit
of crossover between the Arrow, the MMAC, the commercial version of either of those,
and then the issued versions of them.
There's different generations, but this is the one that's available on their website
right now.
All right.
I appreciate your time, guys.
Hopefully you learned something about this.
And if you haven't checked out Eagle in a while, please check them out.
They're trying to do good things, and they're trying to get back out there to support their
commercial customers.
