I Made a Grace Kelly Inspired Dress : Couture Sewing with Sheer Fabrics

Pre-modern Women's Fashion
182 followers
27 Video Views·Jan 2, 2026
In this video, I’m making a wedding dress inspired by the iconic gown worn by Grace Kelly in the 1956 film High Society. It’s not an exact replica, but my own interpretation of the original– focusing on the elegance, softness and timeless silhouette that made the dress so unforgettable.
This piece is made from sheer organza, which means there’s absolutely nowhere to hide. I’ll take you through my process as I construct the dress, sharing couture-style sewing techniques along the way, including French seams, my preferred method for baby hems, and tips for handling delicate fabrics.
If you love old Hollywood glamour, refined sewing techniques or watching a detailed dress come together from start to finish, I hope you enjoy this one!
Hello and welcome to Inside Studio Dynamite where I take you behind the seams while I make vintage
inspired dresses. Now in today's video I'm going to be paying homage to a classic movie moment
from all the way back in 1956. I know that this dress has lived rent-free in so many people's
minds in the decades since this film has been released. The dress that I'm talking about
is the iconic wedding gown designed by Helen Rose and worn by Grace Kelly in the film
High Society. Now this dress is an absolute scene stealer. It's so soft and flowy and romantic and
it's completely unforgettable. Now this isn't going to be an exact replica. There are differences
throughout so mine is a one-piece dress where I do suspect the original may have been separate
so I think it might have been a top and a skirt. Mine is a one-piece dress. Also there are gathered
sleeve caps so the shoulder shape is slightly different and the fabric is a little bit
different too so it's not meant to be an exact replica stitch by stitch but more of an homage
to the original and capturing the spirit and the romance of the original piece. I should say that
I am not making this dress for myself and when I'm making a dress for somebody else it's important
that I do prioritize the making of the dress. That's the most important thing here. With this
fabric there is absolutely nowhere to run, nowhere to hide so if I make one wrong move, one mistake,
it's game over. So I do need to make sure that if I get in a flow state and I forget to hit record
it's all for the well-being of the dress. It's really important that I prioritize that but
having said that I do hope to take you through as much of the process as I can. I'm going to be
working with an organza today so there will be some tips and tricks about working with sheer
fabrics. We're talking French seaming and my favorite technique for baby hems. I've tried all
the techniques over the years and this is the one that I find works best. You get really good results
every time and it's very easy to do so I will talk you through that. And of course at the end of the
video I will show you the final dress. This is a piece that I'm so proud of. It is a very complicated
dress to make but the results are so worth it so I can't wait to show you that at the end.
So if you love old Hollywood glamour, couture sewing techniques or just would enjoy watching
a slightly nerve-wracking and really overly complicated dress come together then I really
hope you'll enjoy watching this video. Let's get into it! The first thing I'm going to do like I
do with any project is to get all the cutting out done. I find it to be the most boring part of any
project so just get it all done at the start and over and done with out of the way. The skirt for
this piece is a circle skirt with a gathered layer of organza over the top so this is a duchess satin
fabric and the first thing I'm going to cut is the huge circles for the circle skirt. My client
wanted a really long skirt for this so these circles are massive and they don't even fit on my
cutting table which is very big but they don't even fit on it but I do still realize how lucky
I am not to have to do this on the floor. Next I'm going to pin them onto a dress form and let them
sit for a couple of days so that the hem can drop. Next I'm going to cut the pieces for my bodice so
I'm using again the duchess satin fabric which I'll use for the lining and the outer layer and
I'm just going to cut the closest size of my sweetheart pattern and I'm going to do some
adjustments to that later. Once all that satin is cut I'm going to start cutting the organza and
for that I'm going to want a fresh new blade on my rotary cutter. I don't want to be hacking at
this fabric it's really super delicate and so I just want it to glide through like a hot knife
through butter so a nice fresh rotary blade is needed and also I recommend changing these very
often. I've used rotary blades almost daily for at least 10 years and I've only cut myself twice
on a rotary blade and that both times was when it was really dull and I was really pushing hard and
slipped off the ruler and so both times I had a dull blade so you really just want to keep your
blade fresh. So here I'm cutting the panels for the skirt and I'm just preparing my board ready
for that with some masking tape and all I do is I measure the length that I want the skirt to be
plus seam allowances at the top and bottom and then I just run a line of masking tape along
and then once I've laid my fabric over the top of that I can use that as a guideline and just cut
straight across that and I find that it's a really nice way of getting a nice neat straight line
through a sheer fabric without having to measure it again and again and again.
Now I wanted to add an extra panel into this skirt because the client wanted the skirt to be
longer. If you imagine the circle skirt that's underneath it the longer you make the circle
skirt the bigger the hem is going to be on that so the bigger sweep so I'm adding an extra panel
into the skirt just to account for that so that my organza overlayer isn't kind of holding down
and repressing the circle skirt underneath it so this will end up I measured it after and it
ended up having a 5.6 meter sweep so that is a lot of fabric. Here I am cutting the sleeves of
the dress now here's a fun fact when I was developing the pattern for this dress it took
me seven versions seven attempts to get these sleeves just right with the right amount of
billowiness I kept adding width and width and width until I ended up using the whole width of
fabric. You'll notice that rather than a thick heavy cardstock as I use for most of my patterns
this one is on a tracing paper and that is so that I can see where these embroidered motifs
are landing and I'm just going to reposition that until I'm happy with where all the little
embroidered bits are then I'm going to pin it onto the dress form and just check that I am happy.
The original dress is quite symmetrical but I do tend to favor asymmetry it's just personal
preference so I'm just checking to make sure that I'm really happy with where these little
embroidered bits end up. Next we are going to move on to French seaming and I'm here to demystify
French seaming for you it really is not that hard all I'll say is the hardest bit is getting into
your head which order to do things in and it does sort of go against everything if you've never done
a French seam before because the first seam that you make is wrong side to wrong side together so
here I'm pinning the wrong sides of the fabric together and then I'm going to move over to my
machine to make that first seam and I'm going to sew this first seam at a five millimeter width
so we're just doing a really narrow seam on this first little part here and don't forget we are
wrong side to wrong side together for this bit here's how it looks after the first stage
and then we're going to move over to the ironing board and we're going to press this seam so we
can press it to either side it doesn't matter and again I'm going to use a iron and a tailor's
clapper which in every video I make I'm sure I will sing the praises of a tailor's clapper
they are fantastic especially when you are doing something like this that requires a lot of
pressing it just presses your seams so much nicer and I will harp on about it every time
so use a clapper if you can and so we're pressing that to one side and then I'm going to fold those
raw seams to the inside and I'm going to press along that seam that we have just made
so you should be able to see here I'm just folding that neatly with those raw seams are now enclosed
and I'm just going to iron along that and just press that once all that pressing is done this
is what it's going to look like and then we're going to move back over to the sewing machine
and I'm going to make now a one centimeter seam and then so if you think about it the first seam
was half a centimeter and then this seam is one centimeter so that's one and a half centimeters
total and this is how it looks that's it we're done well I say we're done we're done with
explaining how French seaming is done but I have a lot of seams here to do on this skirt so I am
just going to rinse and repeat until all the panels of this skirt are joined together and next I'm
going to gather this skirt so I'm going to move to a long stitch length and sew two rows of
stitching so I can hand gather this skirt I always prefer to hand gather it's just personal preference
I think I know that you can get a special foot that can do this for you but I prefer the control
of doing it by hand and I've always just done it by hand so I'm just used to doing it like this
so I'm just gonna pull this fabric across and just keep on pulling and pulling and pulling
until the fabric is the width of the waist measurement and this does take a little while
but I don't mind doing it by hand gosh even with a time lapse this takes ages nearly there I promise
I guess another drawback other than it taking a little bit of time is the potential for the
loss of fingers by cutting off all the blood supply to them as you can see here a little bit
dangerous don't spend too long doing it or you might lose your fingers now I'm going to get into
the adjustments for the bodice I like this to be very closely fitted and I just do this in quite
an instinctive way so I put it on the dress form inside out and then I'm going to do some pinning
and marking and just pinching and playing around with it until I'm happy with the fit
then I take it apart make the necessary adjustments and then sew it back together
again pop it back on and check that it's okay so this will come off and go back on again two
or three times and I will not stop until I'm happy with the fit of it once I've made the marks on the
fabric I use this quilters ruler because it's got these nice markings and it's see-through
and so I just run that one and a half centimeter line across the line that I've just made with my
pencil I'm really sorry I used a normal lead pencil here for this so you could see it because
I couldn't you I couldn't find my blue chalk pencil so what I'm doing is running that one
and a half centimeter line across the line that I've just made and then of course with any
adjustments that you do on the form you should get a curve and just true them up because they
might be a little bit wobbly once I'm happy with the fit of the bodice I'm just going to transfer
those adjustments that I've made over to my outer bodice pieces and to the flannel interlining that
I'm going to use here so I just back each piece with flannel which just gives it a little bit
more body to the bodice so I'm just transferring the adjustments that I've made here onto that
and I'm going to back each of the pieces with this flannel sew them together and then just
clip any excess out of the seams just so I don't end up with really bulky seams now I'm moving on
to the internal structuring of the dress so of course I'm going to use spiral steel bones as I
almost always do I'm just cutting them to length here and yeah please join me in a prayer for my
manicure I can see here at this moment that it's perfect but I don't hold any hope out I know how
this ends and it's not great for my manicure so just just enjoy watching that disintegrate through
the process of this video once all the steels are cut to length then I'm just going to insert it
into this tubular boning casing and then I'm going to use that to sew directly onto the lining of my
garment but first I'm going to make a magic internal belt using a bra extender and some
grosgrain ribbon and what that does is it's just going to sit very closely against the waist of
the body and it's going to hold the dress up so there's quite a lot of weight going into this
skirt and rather than having that pull the whole dress down this internal belt is just going to
give it some structure and some support and we're just going to make a little buttonhole just so
that the belt can pass from the inside of the lining of the dress to the outside a little tip
here when you cut your buttonhole if you're using an unpicker if you pop a little pin at the end it
will mean that you don't overrun and overshoot the end of your buttonhole time to sew the boning into
the lining now um so all I'm going to do is place that directly over the seam and sandwich the
belt in between the boning and the lining and then just sew up the sides of that tubular boning
casing and what we're left with is the belt that is attached to the boning then and you see it'll
pass through that buttonhole there so you can do it up so that's my bodice basically done I just
need to do a little cover stitch along the top and then that's probably a good place to stop and
have a little break and here's a little relatable moment for anyone who sews I'm sure I was just
about to step out for some lunch and realized what a state I was in look at all these threads
this is the story of my life everywhere I go next I'm going to hem this long long skirt so
I'm going to use the band roll technique for hemming which I talked to you about at the start
of the video it's my absolute favorite technique for doing baby hems so you need this material
it's called band roll um don't try and use a horse hair or something else it is not the same
it needs to be band roll for this to work um so all you do is I'm going to use an unpicker here
just to start off I'm going to pick away some of the threads of this band roll so once you get it
started it's actually really easy to pull it away and I'm just going to pull away enough threads
for the width of my hem so I'm going to probably pull four or five of these threads and what it
leaves you with is a little comb so you're taking those cross threads away and you're just left
with the um what looks like a little comb so next I move over to the sewing machine
and I'm going to place that band roll onto the top of my fabric so this is the right side of
the fabric and all I'm doing is I'm going to line up the bottom edge of that band roll with the
edge of my fabric and I'm just going to sew along very close to that line that we just created
along the band roll um you have to be careful not to sew onto the untouched bit of the band roll so
the the fully intact bit of the band roll we're only sewing across the bit where we took those
threads away and you want to sew a nice neat straight line across this is not fast work um
you have to be still quite slow and careful with it just to make sure that you don't go onto the
main bit of band roll that you just create a nice neat you should be able to see here I've
gone just next to that line there and the next stage of this is all I'm going to do is flip it
down and then flip it up so it's now on the inside of my fabric and do you see what it's done there
it's it's held the fabric in a nice neat line and all you have to do is sew along the top I prefer
to do this actually from the inside so I've gone to the other end here and now I'm just sewing
along just to close that seam and I'm just going to pull it you can pull it too hard and actually
pull it off of the band roll so you have to be a little bit careful with how hard you pull it
but you just want to give it a gentle little pull as you go along and just keep sewing
and you'll end up with a nice beautiful neat little baby hem the final stage is just to pull
that band roll away and it just very easily tears out of that seam and then you're left with
a little neat hem just give that a little press and you're good to go I just wanted to show you
as well if you do struggle to get hold of this band roll or it's expensive or you're worried
this is completely reusable I've probably used this about a hundred times at this point you can
just roll it up and just save it for your next project so don't worry about getting through lots
of it you won't and this skirt is coming together nicely I had to give it a little twiddle just to
see how it's looking I've still got to even out the hem of that circle skirt but you are starting to
get an idea now of how the skirt moves I just adore how this skirt moves there's just so much
flowy movement to it and I just I just love it day two of this project now and we're getting to the
really what I would call the trickiest bit of this and as I had feared when I recorded the intro
to this video this was where I got a little bit lost in the project and I possibly didn't record
as much today as I could have done I find the fitting of this organza over layer to be
a little bit stressful there's a lot to think about and a lot to consider and a lot to keep
your eye on you can't afford to make any mistakes with this fabric at all so what I'm doing here is
I'm again just using my technique of putting it on inside out I've already sewn the shoulder seams
with a french seam and I'm just going to pin this on and match up where I want the seams to go I'm
really really picky about making sure all those seams line up and I've got to do all this before
I even sew it together so I've got to put these front darts in and these bust darts in before I
sew the side seams so it does make it a little bit tricky it's also really hard to mark this fabric
you can only really use a white chalk tailor's chalk and anything else is just gonna mark and
ruin the fabric so I find this bit to be a little bit stressful and so really this is the only bit
that I recorded and then I fully zoned in and focused and got the rest of it done so we are
going to get a bit of a smash cut here to it just being magically done moving on to the sleeves so
I'm going to start by making the cuffs and I'm just cutting I say I cut everything at the start
but I forgot to cut the cuffs because that's a really easy thing to forget once I've cut the
satin I'm going to now cut the organza and you might notice here it's a little bit subtle but
I'm just cutting the organza a few millimeters wider than the satin layer and you'll see why
in a little bit it's only a couple of millimeters on either side but what it does is it just allows
me I'm going to fold this cuff a few times and once you fold it if I don't give a little bit
of extra in the organza it's gonna pucker and it's gonna it's just not going to have enough
space to fold around so you can see here as I'm attaching this to the satin layer it's kind of
bubbling up in the middle because it's too wide anything other than what I'm about to do with it
this would be awful but you'll see in a second once I start folding it all of that extra fullness
is just going to disappear so I'm back over at my ironing board and I'm going to prepare these
cuffs in the exact same way that I would prepare a waistband to attach to a skirt so I am just
going to stitch in the ditch is how I'm going to apply these cuffs to the sleeves so I'm folding
over the outside seam then I'm folding it over again and then folding the inside seam over the
top and once I have unfolded that and pressed it again it just gives me an extra little millimeter
or so so that I can stitch in the ditch and it just gives me the fabric that I can catch there
with my stitch as a little overlap now I'm quite fussy about where I want these cuffs to sit they've
been designed to sit just directly below the elbow and it's actually quite hard to get a cuff to sit
there without working in some kind of elastic or making it really tight and I don't want it to be
uncomfortable so I'm just going to insert this loop of elastic here into the cuff just so that
the cuff will sit exactly where you want it to on the arm without slipping down so this is what the
cuff looks like now that the elastic is in and I'm going to turn it all the right way out and you can
see there that I've got that little overlap so I can stitch in the ditch and I'm just going to attach
the other end of the loop to the opposite side of the cuff just so it becomes a little bit easier
to pass your hand through it and this is what it looks like on and here you can see the elastic in
action it's not tight at all around my hand there but you can just see that it's sitting nicely in
place I'm just going to change the needle on my machine this is actually the second time I've
changed my needle during this project I don't think I showed you the first but this fabric is
so delicate that I am probably a little bit overly cautious about changing needles frequently
I definitely just don't want there to be any snagging going on so I'm going to just change
my needle again make sure it's nice and fresh and here I am attaching the cuff to the sleeve
so I didn't show you this but I've gathered the bottom of the sleeve there just in the same way
as I did for the skirt so two long stitches and then just pulled them tight and then I've attached
the outside of the cuff to the sleeve and then I'm just going to flip that all to the inside
and then stitch in the ditch and secure all of that in it gets a little bit messy and it's a
little bit hard to see but luckily there's so much volume in this sleeve that it's actually
really easy to get in and about there to do this stitch in the ditch technique if it was
maybe a slimmer sleeve this might be a little bit trickier to do but there's actually lots of room
to get in and I'm just gonna feel my way around and stitch in the ditch just to make a nice
neat attachment of that cuff I just have to be very careful not to catch any other parts
of the sleeve as I'm working so I do this quite slowly just feeling my way as I go
and making sure that none of the rest of it gets caught and this is what it looks like so
you can see from the inside it's nice and neat and it's really neat from the outside and the last
thing that I need to do is just remove the gathering stitches so I'm just going to take my
unpicker and just pull those threads out and once I've removed those gathering stitches you'll see
that it's still not quite billowing in the way that the final piece will and so I go back over
to my ironing board and I'm just going to press it down and just sort of steam it out over the
edge of the cuff a bit like a muffin top I really want it to sort of spill over the edge of that
cuff and make that real billowing effect there how gorgeous is the sleeve I just love it I always put
it on and have a little shake I just wanted to show you my setup at the moment it's the currently
the depths of winter in the UK and it's getting dark about half past two in the afternoon and my
studio lights are really orangey so I do apologize if the if the lighting is a little bit off
I'm trying my best with what I've got but launching a YouTube channel in the depths of
winter is probably not my best idea that I've ever had here I am putting the sleeves in with
a French seam yes you can set a sleeve in with a French seam it is totally possible it's exactly
the same process as we went through earlier all of the same processes you're just doing it on the
armhole instead of a straight line I encourage you to give this a try it absolutely is possible
you only just need to be extra extra extra careful with your seam allowances make sure
everything is super duper neat and yeah it is completely possible the French seaming on the
armhole is probably made easier if you have a tailor's ham so like I'm using here just a curved
thing to press on it probably would be a little bit difficult on a flat ironing board so I'm just
using my ham to press out that first seam just like we did earlier but just on the curved armhole
and now I'm going back to the machine and I'm going to do the one centimeter seam and again
I'm just going to keep everything really slow and really keep an eye on what's going on make
sure this stays exactly one centimeter all the way around making sure my gathers because I have
a gathered shoulder cap so just making sure the gathers are all neatly distributed and just working
my way around this armhole really slowly and this is what it looks like when it's complete
the next thing I need to do is finish these edges of the organza and I'm going to be doing that by
making some bias tape of course I'm going to make that myself I'll make it from the same material
that I use for the base dress so this Dutchess satin and I'm going to first start by tearing this
fabric like the Incredible Hulk you would not like me when I'm angry tear a big line in the fabric
now what that does when you tear it you're going to find the straight grain if you start the tear
with a little snip so snip with some scissors and then rip it don't try and cut it just rip it and
that will give you the true grain of the fabric then if you line that up with the selvedge you
will be left with a nice 45 degree angle which is called the bias and it's important that you
make your bias tape on the bias because it needs the natural stretch of the bias just so that it
can go around curves properly I've gone and pressed that line that we created there by folding it I've
pressed that and I'm just double checking it now just to be overly cautious and make sure I truly
am on a 45 degree angle I'm just using this triangle thingy math triangle what's it called
I don't know I'm just using the triangle to check and just make sure at the top and the bottom that
it was 45 degrees which it was luckily well not luckily I made sure of it and now I'm just going
to cut four centimeters width of bias which is the width that I like for this and again I'm using
my nice quilters ruler because it's got a nice easy line that I can follow and now I'm going to
press it out and here's another thing that I do not know the official name for a little bias
making thing bias buddy bias buddy we take our bias buddy and put the tape through it
use the awl and pull it through and you see it just makes the nice folds that you need
if you can put your pin straight through the ironing board and that means that you can then
pull that bias maker and press as you go and it's just going to make the folds that you need
and it's really nice and easy and again I'm going to sing the praises of a tailor's clapper
it's just going to press all the steam into those folds and make it really nice and neat and crisp
and this is what it looks like when you've gone along the whole thing
and the next thing I'm going to do is just remove one of those pins fold it in half
and then press it again so we have halved it in size again then press along that again and that's
it that's the bias tape finished and here's what that looks like and it's ready to insert into the
dress again I'm going to take another needle any time that I start a big bit of this project
I don't know if it's a comfort thing but I just change the needle and I just make sure it's fresh
oh did you see that I lost the top thread let's see it in slow-mo oh I lost it you see I forgot
that I changed the needle and I wasn't holding on to the top thread so I'm going to re-thread that
it happens to us all so once that is re-threaded I'm going to really hold on to that top thread so
I don't lose it again and I'm going to work my way around and I'm going to start with these
corners so the first thing I need to do when I'm doing this bias tape is pre-sew the corners
it's a little bit of a complicated process I have to say I practiced this probably 20 times before
I even attempted it on a garment it was a bit of a learning curve for me this old dog was learning
a new trick when I decided to do this dress it was it doesn't have many practical applications
these sort of right angles with bias binding but I will show you how to do it anyway just in case
you find a use for it on a project or find it interesting so what I'm doing is I'm sewing
the bias tape to the edge of the fabric and then I am going to stop just before the corner
and pivot out to the corner so I've stopped there pivot and I'm going to sew out to the
corner I'm really sorry that my hand is in the way for some of this I was really again just
focusing on what I was doing and just trying to record it as well as I went along so I'll just
show you that up close so I've stopped just shy of the corner and then I've pivoted out to the
corner then I'm going to fold it up and fold it down again pinch it so fold it up pinch it with
my thumb and fold it down again and then line that up with the fabric again and this time I'm going
to take my awl and just point exactly to the very very spot that I need to start stitching it is
really important that I stitch to the very millimeter so I just place my awl there exactly
where I want to start stitching and that just shows me where I need to put the needle down
and then I just carry on and if we take a look inside I'll show you a closer up view so we've
still got some excess fabric there that we need to get rid of I'm just going to trim these um
these threads away because they're really hard to cut away later after we've done the next steps
so I'm just going to get those out of the way and then I will show you what it looks like from the
outside so we still don't have that perfect mitered corner look that I want so we need to do another
little line of stitching so if I flip it to the other side and show you so I'm going to echo that
angle there and then just take it out to the edge of the binding so again I'm just using my
awl to guide me here so that I know exactly where to start stitching making sure that I'm not getting
the organza caught in it as well so I'm just going to take that stitch out to the corner
and now if we flip it and take a look from the outside oh hang on I've got to just trim those
threads again and then let's flip it and I'll show you now how much neater that looks
so I've just got that lovely effect on the corner there and once I've folded everything in and given
it a little press I'm just going to top stitch around all of this and there's my nice neat
little corner and just look at the finished effect I just love how that looks and I always
do a little happy dance because it is quite a tricky bit of it now the bodice is really starting
to take shape we are getting there guys so I'm going to apply the organza layer to the bodice
layer and I actually attach them directly so I'm going to just stitch through all layers
and just attach through that bias tape that runs down the front and just join it all together
please try to ignore the rogue slipper that's in shot here seasoned sewists will understand why
that is there I'd much rather my right foot be warm but that is how you achieve maximum pedal
precision please let me know in the comments if you're in the one shoe off one shoe on club as
well now we're moving on to day three and we're almost done but first coffee so now I'm finally
revisiting this circle skirt which is the underskirt that acts as the base layer beneath
the organza gathered layer as it's a circle skirt I've been letting this hang for a couple of days
just so that it can even out and I'm just using my standalone chalk hair marker just to mark an
even hem and I'm just going to level that out and I'm going to set up my overlocker with the correct
thread I just wanted to show you doing this I'm sure if you own an overlocker you know that the
easiest way to change the threads on an overlocker is just to tie them off so just cut them long
and then tie a knot to attach your old thread to your new thread and then just pull each thread
through the machine so you don't have to go through the faff of all the little instructions
because nobody's got time for that really so as long as you pull each thread separately there's
much less chance of you coming up against any problems now as I was recording this video I had
a very human moment where I suddenly saw a bunch of dirt and dust that you know is usually invisible
to me I normally don't see this but because I was recording I suddenly realized how awful it looked
um so I thought I would clean that up for you so if you want a satisfying little reveal there you go
she's nice and clean I did that just for you and now I'm going to finish off my skirt there's
nothing particularly interesting about this I'm just assembling a circle skirt next I'm just going
to even out my gathers on the organza skirt layer just make sure they're all nice and neat and evenly
sort of distributed and then I'm just going to attach that to the circle skirt and that's the
skirt finished so of course I've got to give it a twirl I want to see how it moves look at that oh
gorgeous and we are so close to being done I just need to attach the skirt to the bodice
and then put a zip in and then I think we're done sometimes when I watch these clips back I uh
I marvel at how close I put my face to the machine does anyone else get their face that close in
time for the zip so with me it's YKK every day baby the only zip I will ever use is a YKK
branded zip for this particular dress I actually use a heavy duty YKK zip now there's it's probably
a little bit again overkill but because of the delicateness of the fabric I really don't want
my girls to be pulling and tugging at their zip trying to get it up it's relatively thick this
fabric when it's all said and done and I just don't want them to have to struggle with the zip
in any way and put any undue pressure on the organza layer so I just use the heavy duty zip
just to be sure that it's going to sail up with ease and that they're not going to have any problem
with that I also just do a little top stitch along the edge of the zip and that is just again
just to prevent that organza layer from getting caught in the teeth so I'm just holding it back
with that stitch and look how nice and easy it goes up it's not going to get stuck or caught
it just handles itself a little bit better and now I'm just going to enclose the waistline seam
using some more of that bias tape that we made earlier it's time to remove the gathering stitches
from the skirt and this part is really satisfying I just really enjoy this bit for some reason
it's just so fun to pull these stitches out and again you can have a little laugh at the things
that I find fun the way that I insert a concealed zip is just on the outer layer of the fabric
now that's just so that it has a little bit less fabric thickness to contend with and that's just
the way that I prefer to do it and then I hand stitch the lining into place on the inside I've
also sewn a little loop which will act as a hook and eye fastening at the nape of the neck and
that's it we're finished so we're ready for the grand reveal and I just thought I'd show you the
inside of it before I show you the outside because I do love to make the inside of the dress beautiful
I really hope you enjoyed watching this dress come together and if you did I'd be so grateful
if you could like and subscribe I am relatively new to YouTube so also any feedback would be
appreciated see you on the next one
