Sewing a Lacy Edwardian Blouse

Edwardian Threads
5 followers
22 Video Views·Jul 23, 2025
Join me in the first part of My Blouse Saga as I transform vintage bobbin lace doilies into a lacy blouse. Although these doilies didn't fit my decor, their delicate charm inspired me to incorporate them into a garment. After much deliberation, I settled on the chest and shoulder areas, guided by an antique sketch I discovered on Pinterest from the French magazine ""La mode illustrée.""
Materials Used:
- 1,5 m of white cotton voile
- Silk and cotton sewing thread
- 16 buttons
Quite a while ago I bought these two bobbin lace doilies and while I don't like them as
decor items, I'm all in for lacy garments. Having them laying around screams old-fashioned to me,
but in a garment I really like that vibe. Make that make sense. But anyways,
I knew I wanted to make a blouse and somehow fit these doilies into the design.
Finally I settled on the chest and shoulder area and also found an antique sketch of a blouse that
would fit those requirements. Equipped with the pattern I traced it and simulated it in 3D software
CLO3D and after scaling the pieces and solving the three-dimensional puzzle I wasn't that sure
if it would fit. The basic scaling looked right but I just couldn't imagine that the back piece
would work like that. But since I wanted proof of my suspicion first I switched to real life sewing
and made the first mock-up. And I was right, I could barely put the blouse on since the back
pieces didn't give any room for my shoulders. So I changed that what gave me more room but
then the proportions of the shoulder pieces didn't fit anymore. This mock-up version 5 I guess.
So I've cut it all out and now I have to re-sew it once again and see if this might be
hopefully the last mock-up and now most of it fits. This time it only took me six mock-ups to
make it work and not 26 like last time. I learned apparently some things last time
and I had to help. I should not forget to mention that. My friend Clara helped me when I was stuck
gave me the tip to take out the extra fullness of the gatherings to see if the overall shape is good.
So if you want not where the volume has gone this is the reason. And it will be added later
in the actual blouse again. I did my last mock-up. These patterns now really fit my body. With a
fairly good fitting mock-up I proceeded with preparing the actual blouse. I used a white
cotton wool which I find fits the delicacy and color of the lace doilies quite well.
At this point I got a little stuck since I not only wanted to fit the doilies into the design
but also make my own lace. And I realized that this will take a little longer and it would not
make any sense to wait with the blouse until the lace is finished. I then started sewing the main
seams. I made trench seams since I wanted all the seams to be neat and avoid any chance that
the fabric starts fraying. That's also the reason why I finish every piece with the overlock. Well
actually that's not quite true. I really wanted to check my grandmas machine and see if it still
works after 10 years of idleness. And I can proudly confirm that it does with some pickups.
But I will figure out what causes them enough. I went completely nuts with securing those seam
allowance but secure secure. Then I created the gatherings with two lines of fairly wide stitches
along the edges. Following that I gathered them by pulling in the two threads and securing them
with a needle. At the shoulder pieces I had to make sure that the gatherings were really neat
and tiny in order to fit to the shoulder pieces. Then I sewed them on. First sewing it on with
half a centimeter of seam allowance and after a good press where I made sure that the shoulder
pieces lay really really flat and the gatherings are pushed down I made trench seam and turned
the seam allowance around and sewed it on the other side. The only point where this was a
shoulder piece is around so I had really to make sure that the gatherings lay flat on the other
side. Once the main seams were finished I had some concerns. As you can see somehow those shoulder
pieces really were go wide over my shoulders and in the mock-up this was not the case.
So now I'm somewhat confused why these are suddenly way too wide outside. I hope the solution is
that I have one and a half centimeter of seam allowance here so once the collar is set in
collar once the collar is set in it will be pulled up a little and then it as I tested it
should pull up again a little bit so that it would fit but I'm not sure if that's the case. I'm
a little bit frightened but anyways I will hope I just hope that is the solution. So I sewed on the
collar all again with trench seams for first with the normal seam and then turning it around and
sewing it once again. I have some troubles I don't know why but also with the last blouse the cuff
ended up to be too small and when the mock-up it fitted. Maybe I should change a little bit about the
I mean I don't know I really don't know I think I will sew it in right now and see if it works
or not and if not I have to reopen it and recut it I guess but it's just too small it's just
all my arms haven't gotten bigger in the last two weeks or so I don't know but I will stop
complaining right now and do the work. The cuffs were a little bit difficult to sew in so I had to
really force the fabric beneath the sewing foot but once the gathering part was done that was
fairly easy again. By the way this is the only seam I did not wear as a trench seam since all
the gatherings made it impossible to do so. Then I closed the cuffs approximately halfway in order to
let the cuff sit snug to the arm and only open as much as is needed to get my hand through.
Okay the sleeves are way better than I thought before. I think that the pins which were in when I
tested it first made it a little bit more bulky so that it felt way too tight but now it's quite
right. It's a tight sleeve but it's I think it's okay. I like this. But I think I will change one
thing and that's the collar. I feel like it's a little bit too high and makes my just my face
look like it's set on a ... I don't know ... like my head is cut off. So I think I will shorten the collar a
like two centimeters or so that there's a little bit of neck and it doesn't look as
placed on it. So that's what I'm going to do I think now and for the rest I'm quite happy.
I have to close the back ... no it's open ... and make the folds in the front. And of course I forgot to
set in the lace here so that's what I'm going to do once I have shortened the collar too.
Let's do it. So I picked the seam open and tacked the lace to its place since I wanted the raw edge
to be hidden in a seam allowance. This also prevents the lace from unravelling. And in case
you're wondering why I haven't shown you the lace yet, well it's not finished. So that's why I decided
to put it in another video. And yes you see the lace in the front. That one is finished but my first
plan was just to make the one band for the front. But when I was fitting the blouse I found the sleeves
way too voluminous and this was another moment my dear friend Clara helped me. She came up with the
idea to tie the sleeves in a little so that I don't lose volume but still create a more flattering
silhouette at the arms. And this I will do with some lace bands. And those are not finished yet.
But let's go back to the blouse since it isn't finished yet either. I proceeded sewing on the
lace with the machine which might not have been the smartest idea because I had to turn around
the fabric under the foot every couple of centimeters in order to follow the scalloped line
of the lace so that you won't see the seam that much. Maybe it would have been easier
doing it by hand. But anyways that's how I proceeded stitch by stitch.
And once the lace was sewn in I had to add a waistband which was indicated in the pattern as
being two centimeters wide. Once I had pinned it on and made a quick fitting check to know if the
waistband was long enough I was extremely disappointed. I just felt so unflattering with that
big pigeon breast. I know that this is the shape of Edwardian blouses but I so deeply disapprove
of it looking in the mirror. That's why I decided to cut off a bunch of fabric at the bottom.
I pinned it where I wanted the waistband to actually sit and then checked if I now like
the new fit and actually I did. It still has kind of this pigeon breast but
not that pronounced anymore. I'm still really really scared to cut off the lace
but I think I just have to. I marked the new placement of the waistband then ripped off
the gathering and once it was placed absolutely flat and symmetrical then I pinned and marked
where I have to cut. And then did the most painful thing and cut through the precious lace.
I don't even want to think about how many hours of work I cut off at that moment. I quickly resew
gatherings and you can really see how the gathering already starts behind the sewing foot.
Once that all was back in place I sewed on the waistband one side by machine and the
inner side I sewed on by hand with a felling stitch so that it won't be visible at the front.
And once it was all sewn I felt better with the decision. Still I couldn't really see if
it has improved the shape yet since I could not close the blouse without any buttons.
The buttons created a quest for themselves. I actually bought two types of buttons. The first
one online and some more in the store and both just looked way too yellow in comparison to the
fabric. So I decided to add another step and cover some transparent buttons with fabric.
And as you can see even those transparent buttons have a yellowish tint which is actually still
visible with the fabric over it under some lights. But I decided to ignore that.
The covering for the buttons is the same fabric as the main fabric and I cut out some circles
and pulled the fabric in. And I really had to pull as tight as I could and it was so difficult
to push the needles through it after a while. But I didn't want any wrinkles on the front so I had
to put a lot of tension into it. But luckily with the symbol I managed to do that. I marked
where each button has to sit and then sewed them on using the material on the back.
Once the button went sewn on I also added some crochet loops to the cuffs because I don't want
any buttonholes down there. I had some struggles since the thread was quite short but once it was
sewn on it looks like this. The buttonholes I sewed with my modern machine since I'm still
not feeling ready to make some by hand. And at this point I was glad to not add even more time
to finishing this blouse since I really badly wanted to see if it was worth all the work.
And after the scary step of cutting this buttonholes open I was not yet ready to fit it on.
I first had to sew on the hooks and eyes for the collar which I still do not like to do
but maybe someday I'm able to make them stay where they should.
It is all sewn, all finished, all the last finishing touches like
cutting off those loose threads or making buttonholes. All that is finished. I just have
to add the lace in order to make it a lace blouse and therefore I have still to go
through the piece of the pattern for one of the lace strips. And once that is done
I finally can finish the blouse. Nonetheless I can put on the blouse now.
And I'm so happy I made this last alteration at the front. Even cutting through the lace now feels
like the right choice. And next time I will show you how I learned to make exactly that lace and
of course how this blouse becomes a lacy one.
