Shaw Concepts Plate Carrier v2

Ballistic Lab
1 follower
1 Video View·Jan 2, 2026
Shaw Concepts Plate Carrier v2
Alright looking at version 2 shot plate carrier here again if you haven't watched the version 1 video check it out
It's just interesting to see what changed between the two videos
Or between the two rigs right not much you change between the two videos. I'm shooting in the same day
Again shout out to Jason for sending me these
huge favor
Awesome way to help support the channel. I really appreciate it and
Want to make sure that you guys know that we got awesome people watching the videos and sending stuff. All right, so version 2
Things that have changed from version 1 are kind of interesting as we go along through here
If you have any questions, like what actually changed watch both videos. I'll try not to beat that to death in both of these
All right. So I take the version 1 laser cut it make it sexy
And and streamline it a little bit. All right, so I will say
This plate carrier is
expensive
It doesn't come with a cummerbund and the cummerbund is kind of wildly expensive
So just be aware of that if you haven't looked at Shaw pricing, I'm not saying it's not worth it
That's your call to make I try not to sharpshoot people's pricing too much because it's their livelihood
It's their time designing it in the case of Shaw. He's got to get it manufactured
so that's gonna cut into some stuff, but we'll look at it. All right, so first things first these
Tubes adapters here do not come with the plate carrier. They come with the cummerbund
Luckily, you need a cummerbund to use this thing. So if you're buying the Shaw one, you're gonna get them
But they don't come stock. All right
I'm not 100% on whether these buckles come on here or not, but that's like a $5 venture if they don't so don't sweat that
All right. So
Looking at the front plate bag here. We've still got the elastic up towards the shoulder straps
However, all the perimeter has changed to kind of a laser-cut molly
Except for down here at the very bottom. All right, which is a little bit different from version one
May or may not matter for your uses. It's more durable for like push-to-talk mounting
It's also kind of on the side of the plate bag
So, I don't know how useful that is, but you can definitely tether with it. All right
The the side release buckles obviously mount very cleanly
You've got some laser-cut molly running the whole length down to the velcro. So you've got a lot of room
to move
Nav panels or whatever up and down as you need to it's got this interesting
horizontal molly up top
Whether that's more useful than the elastic, I don't know
I kind of feel like I'd rather the elastic but
It's there and you could definitely weave some elastic or rubber bands in there to mount whatever you need to so
If you're doing the rubber bands, maybe it's it's kind of neither here nor there. I'm not sure. All right, and then you've got some laser-cut
lashing points down here
For
Probably shock cord not necessarily rubber bands. The laser cut would probably chew through your rubber bands pretty quick
And then you've got the stacked velcro laser-cut molly for the front
So if you don't want to admin panel or something you slap your giant American flag on there. Let everybody know who you are
Or you can mount stuff there. All right, so that's the front of the plate bag here
Another big change so you no longer have the fixed dual tubes up top. You can choose weak side strong side
for where you want the tube and that's
Easily user configured so you can swap that side to side
Based on whether you're correct-handed or wrong-handed or whatever's going on, right?
We'll do the outside of this thing first and then we'll we'll flip it inside out and look at the inside because there is a
Huge change on the inside of this thing
Looking at the back
Really nice full-length laser-cut molly on the back here
Really maximizing the kind of the rectangular profile
So the plate even though it's recessed in here. You've got usable webbing
so if you've got a really long like zipper adapter or something like the Eagle zippers or
Even Faro zippers or whatever you can mount that no problem and you actually have some control over the ride height
So like if you had cry adapters on here
You could probably get a version 2 cry pack on here and have less overhang on the bottom, which is kind of neat
All right, so I have elastic up top for any kind of comms cable routing antenna routing whatever
And then your laser cut
Velcro stack there
You also have the the laser cut kind of molly ish on the sides and then some elastic again down towards the bottom
And then the sideways or horizontal molly up top shoulder straps really haven't changed much
Streamline just a little bit and then obviously the change between two tubes versus one tube
the
Access to the cumberbund routing is better on this one
We can see that once we open up our plate pocket here. So that flap opens up and then we have a
lace
Velcro grid here. So if you wanted old-school Velcro cummerbund, you can do that
This is that awesome first spear
Velcro material here
So you can mount that no problem or you can use lace in cummerbunds
You can use JPC AVS style cummerbunds or this Shaw cummerbund here
Which I'll go over a little bit more detail once we're done with the the plate bags themselves
All right, but really good access with this flap here, which is nice
All right
Another huge thing on the flap that is
This is really something that really tells you somebody put some thought into it is the center recess here
So as you close your plate pocket, you don't get that that nasty kink in your plate bag
Which can eat up some some Velcro space there. So you've got that relief cut in there
So it contours the plate better which helps it fit the plate. So that's supposed to better
All right, I will say issued eSappies with
soft armor backers
In medium in this small medium
Plate carrier are real tight, but they fit right? It's a it's a tolerable fit so I can't complain there
So that is the
Outsides of the plate bags. We'll look at the inside real quick and hopefully I can get this on camera. Well, but we'll see
So, I believe Shaw calls this
his
spider system, which is not readily apparent if you haven't done complete research on this thing, so
when I got it and took it out of the package from Jason, I tried to stick my plates in there and
No bueno. I couldn't close it on medium sappies and backers and I was real disappointed
I thought that was kind of kind of wild that Shaw would make it and not fit like issued armor
But that's because I did it wrong. So you've got this
Chunk of spacer mesh here. That's velcroed on right?
I should say the version 2 is inherently a little bit bulky compared to the version 1 not bad
Definitely not ABS with harness bulky, right? It's very very comfortable
So you take this spacer mesh and peel it down?
And that exposes
The spider system here. So these two straps aren't really necessarily part of it
These are purely the shoulder straps, but you may need to pop those up to get them out of the way here
But as you do that
Now these laser-cut molly strips that you can see on the outside of the plate bag
That's how you take up the slack on the plate bag
so you got to undo all this get your plates in there and your backer in there if you want one and
Then tighten everything up and that's how you fit your medium
ESAPIs with backers and then you've got this top flap here, too
In case you've got some shorter plates
You can take out a little bit of the height and then you also have this molly strip here this velcro one wrap strip
I'm not sure if there's like an aftermarket thought there or if it's just for more routing options
It's kind of neat if this was my rig and I was setting it up and everything
Maybe I had to find a use for it off the top of my head. I don't necessarily know
but you could for sure use it to tuck some cables out of the way and
then
You have the the relief holes or the vent holes cut down the center of the plate pocket there, which?
When you close this up, you've got that channel so you can get some ventilation
Down your back, which is is always a nice thing to have. All right, so
That is Oh along the bottom here front plate pocket
You've got horizontal molly and then back plate pocket
you have
This kind of whole grid system here so you can use some shot cord and mount something if you wanted to
It plays well with
danglers
They'll fit in there. I don't know if there's the true industry standard, but you've got
Loop internal and then hook external. I don't remember anymore which danglers use which
So make sure you double-check that if you're gonna use a dangler
You don't have the fixed tubes
Dangler ability on the front plate pocket pocket anymore. I don't necessarily think that's a loss
If you want tubes, you can easily dangle a tube. It's not a big deal
All right
Really nice plate carrier
Clearly well done. I believe they're still OEM by first fear which first fears does incredible work
So no, no concerns there. All right, let's look at the
Structured cummerbund while we're here though
since it's kind of like
Kind of should go with the plate carrier
But it is kind of an aftermarket thing
They're clearly made to go together
all right, so it threads in really nicely into the rear plate pocket through the holes here and then
Very easily attaches with this grid system. Take your plate out. It's gonna make your life a lot easier
To get it started and then thread it in there
I will say the the stretch from the shock cord on the back of this thing much more apparent
When you're using it then like a JPC
JPC once you kind of tether everything down
There's a little bit of stretch, but you don't ever actually really feel it this one when I was pulling the cummerbund around
I could actually feel
Some give in there, which is really nice because again with tubes you don't have any rapid
sizing capability
so to be able to stretch this out over, you know, some sort of light layer is
Is nice or if you really like to crank your cummerbund down you can and then stretch it to fit you
Alright looking at the plate carrier. It's why or that the cummerbund. I'm sorry
It's wildly different than the version one. I'm trying to try to keep this on screen here for you a little bit better
There we go
So it's a it's a sandwich of materials here. So you've got the the really nice first spear velcro
You've got molly that you could use from either side
I don't know if you could do both sides in the same location very easily
I'm sure you could make it work, but it would be I'm sure it would be a nightmare to thread those pouches. So
Internal will take like your first spear Ragnar type pouches
Any velcro backed pouch will fit in here
Pretty well, and then once that's you know wrapped around your body, it's not gonna go anywhere, but it's not like hard mount. It's anything
But side plate pockets all that stuff you could put in there and then outside has full laser-cut molly
And you can kind of make it out. There's a Tigris liner in here. It runs the full height
And then it's also in the straps here
I forgot another big selling point is the way this is set up just like the SPC
You can drop your cummerbund down
Which will help raise that rear plate bag a little bit and make everything fit kind of where it should
Huge fan of that. I'm really glad he included it
It's a it's a big selling point
For how that works, right?
Due to the height that I wear my my plate carrier
Which as far as I know is the like the appropriate height the Tigris here
Does get up into my armpit just a little bit. I don't know long-term if that would cause any issues
But it was close enough and I could feel it enough that that I noticed it and
It would definitely be something to keep an eye on if I dropped it down even just a little bit
It really wouldn't be an issue
But it would be nice if this
If there was some way to kind of cap
That
That Tigris material there. It's got the little bit of like the the stitch line for the molly
Covering it, but uh, there's plenty of exposed there that if it was just sitting just wrong in your armpit
It could be real aggravating. I
don't think it's gonna be an issue for everybody by any stretch, but just something to be aware of and
Then the tubes here are done
So you lose as as little real estate as possible
The tube is kind of behind the cummerbund which ends up not being an issue from the Tigris there
So you don't really lose any footprint
Versus when the tubes hang out the side of your cummerbund you kind of tend to lose like a column of molly
The the cummerbund I will say it is wildly expensive. I believe it's a hundred and eighty dollars for the cummerbund
So that may be something that you want to explore an aftermarket solution for
But because it's not included with the plate carrier
You don't have to eat that cost in the plate carrier and then buy a cummerbund separately
So, I don't know six in one hand half those in the other which whichever you prefer
you know full setup from the factory or
Kind of doing piecemeal. All right again really great plate carrier
Huge fan of it
Very very comfy from wearing it around with actual plates in it and just kind of moving seeing what's going on
Good bit of adjustment the straps again plenty of adjustment there to size them where you want
Even if you run your plate bags really high like I do
All around really great rig
Maybe a little bit of a little cost prohibitive there, but that's kind of your call to make again
I don't want to sharpshoot anybody's prices
Because they've they put a lot of shot of clearly put a lot of design time into this thing
And I'm sure going back and forth with first year to get exactly what he wanted was no easy task
Really cool rig and
You can tell he definitely put a lot of his personal flavor in it. So thanks guys. Hope you enjoyed the video
Hopefully this clears up any questions before the next batch of these is released
Definitely check it out if it's something you're interested in and thanks for watching guys
