Shaw Concepts Plate Carrier Pack Review

Ballistic Lab
1 follower
1 Video View·Mar 8, 2026
Some things I failed to mention:
- If you load up the pack too much, when in clipped onto the plate carrier, it will cause the front plate bag to ride a bit higher
- The straps on the front are removable if you don’t want/ need them
Had my eyes on the Plate Carrier Pack and I was looking to replace my knock-off Crye Zip-On Pack. Definitely worth the investment.
DISCLAIMER - I have NO affiliation with any brands or companies of the gear or products mention in my reviews other than just being another costumer.
How's it going guys, Agent InGreen here again. Today I'm going to be going over the Shock
Concepts Plate Carrier Pack. Quick disclaimer, I have no affiliation with Shock Concepts or any
other gear company for that matter. The only relationship I have with them is just being
another customer. So I bought this with my own money. It's about 200 some bucks off of the Shock
Concepts website. Before this, I had the knockoff version of the Crye Zip-On Pack.
It wasn't bad, it sat pretty flat. However, the issue I had was being able to access my own gear,
right? If I wanted to access my own gear, I would have to take my plate carrier off
or I would have to someone get something for me and that was kind of a hassle. So I got this.
When you buy a plate carrier pack, it comes with a pair of female repair buckles as well as a set
of male repair buckles instead of like a standard split back. It's kind of got like a locking bar
mechanism. I have had an issue with it so far. They feel sturdy. They don't feel flimsy or brittle
at all, which is nice. It also comes with a pair of horizontal MOLLE adapters. So it's like a split
bar on the end, which anchors down on the MOLLE and then it's like a bit of MOLLE webbing with
a buckle on the end of it. So you can still attach the plate carrier onto a kit that doesn't have
horizontal MOLLE. For example, like the Army Issue MSV.
Shock Concepts advertises this as a 24-hour bag, so it's not going to be as big as like
the Army Issue Assault Pack or like the Mystery Ranch 2-Day Assault Bag or whatever they call it.
Undoing these front straps, the zipper, the main zipper goes all the way down.
All right, so it folds out nicely neat. It has a loop velcro lining the inside
for any organizational stuff. I didn't see any organizational items from Shock Concepts.
It also has a sleeve in the back, which can be used as a hydration bladder, which can feed the
straw through this zipper in the top. It also has a G-hook on the top to prevent the zipper from
being able to come undone. Shock Concepts also sells like a Tegris tool sheath for like
bolt cutters, for example, if you ever need to carry bolt cutters. And then this little
locking bar slides through this MOLLE webbing on either the left or the right side,
depending on how your straw is oriented. And then it keeps the zipper from moving freely.
And then this G-hook keeps everything nice and tight once it's all zipped up. Yeah, so back
pocket you can use for a Cadillac bladder or like the Shock Concepts tool sheath or if you need a
pole diverter for anything. Moving on to one of the smaller pockets. Me personally, I have batteries
in here. It has a nice little retention loop, like tie-down points for any sensitive items
or anything you want to keep tied down. And then the inside of the pocket is also loop-lined.
Shock Concepts showed off that you can also put like a magazine insert in here so you can store
some 5.56 magazines or whatever magazines you need. Has a pretty good size loop field for any
identification patches. And then on the smaller sustainment pouch you have another loop lining
as well as a drainage grommet on the bottom. The smaller top pocket has one as well
for drainage or any like dust to help get it all out. Shock Concepts says on the website it's made
out of Cordura, Cordura laminate and quote-unquote other male spec materials. Moving on to this side
on both the left and right you have two columns of MOLLE if you ever need to attach anything or
tie anything down. And then for the shoulder straps you can wear as a traditional backpack
or you can just undo it and then hook it into the plate carrier which I will demonstrate here in a
minute. It comes with these padded shoulder sleeves which are pretty good. Nice and thick
padding if you wore this by itself. And then to adjust it you just feed the slack through
so to loosen it or tighten it, excuse me, just feed the front part through and tighten it down.
You want to loosen it, you feed the opposite way, pull it tight and just put the sleeve back on.
And the padding for the sleeve is only on one side so it's only on this bottom part
that actually goes onto your shoulder or on the shoulder straps of your plate carrier.
Before I go into mounting it onto my plate carrier, you actually fit quite a bit in here.
Like for example if I take this chest rig, pull it up nice and you don't have to pull it up too
nice. This does pretty well. Gloves, you zip it up. It still has a pretty reduced profile as if
you're carrying it with like an assault pack. And obviously you have the straps to help cinch it down
if you need to keep it nice and tighter. Or you can also fit a pro mask or a gas mask in here
with or without the carrier but I'm going to show the carrier because it's a little bit bulky
just to show off how much you can actually fit in here.
And I forgot where I saw, I also saw an image of someone fitting a whole sleeping bag in here.
Once you have it mounted onto the mounting kit on the plate carrier,
I mean all you gotta do is just strap it in the shoulders and then the sides.
It should pretty, like the strap should be pretty flat, not too much slack if any.
Maybe just a little bit so you don't have to fight with reattaching it.
And then you have the, obviously it comes with these little elastic retainers
for any excess. And then the intended way to access the plate carrier pack by yourself
is to undo one side. They recommended doing the cummerbund first and then the shoulder strap
and then maintaining positive control of the strap and then just flipping it around the front.
They don't really recommend going over the top
because they don't really, the shoulder straps don't go out too terribly far and it's pretty
shallow if you lift over the top so it might end up getting caught on your helmet or something like
that. I've worn this, you know, on dismounted patrols, mounted patrols, so like in and out
of a vehicle and I haven't had too much of an issue with being pushed too far off the seat.
But, you know, a little tip you can do, you can pull the pack a little bit higher and then you
just have something to rest your head on. So like I said, I've been pretty satisfied with the
Shock Concepts Plate Carrier Pack. I don't really have any complaints. Nice and compact. I can fit
in here what I need to get the job done and overall an improvement to my knockoff Zip-On Pack.
If you have any questions, feel free to leave a comment below. If you like the video, please like.
If you didn't like it, I don't know what to tell you, man. My next video will be on the Shock
Concepts Usurper Battle Belt, so look forward to that. Stay tuned and I'll see you guys in the next video.
