Understanding Slick Plate Carriers | Ferro Slickster, AC0, LV-MBAV | Comparison & Review

Ballistic Lab
1 follower
Free Men need scalable, low-profile equipment. Slick carriers are part of that equipment set. Inthis video, Logan gives in-depth analysis of three popular body armor carriers known for "slickness" - defined primarily by lack of MOLLE and concealability.
0:00 Introduction
1:12 Crye Precision LV-MBAV
11:24 T.REX ARMS AC0
15:56 Ferro Slickster
26:06 Scaling Up Slick Loadouts
#nokingbutchrist #armoredrepublic #bodyarmor #platecarrier
Slick body armor carriers are an enormously valuable asset for a free man looking to defend
his rights. The reason why is because a slick body armor carrier gives you protection
that is low visibility and scalable, which means that you could start out with just the body armor
vest and maybe a concealed handgun for certain operations, but then move up to a rifle rig
and you have the exact same body armor vest underneath. Now for that reason, a lot of
different companies have presented different slick carriers to the civilian market, and in this video
we want to break down three main archetypes that we see across three very popular slick carriers
created by other companies, and those three carriers are the Crye Precision LV Embav,
the T-Rex Arms AC-0, and the Ferro Concepts Slickster. Each of these follows a particular
design strategy that creates different strengths and weaknesses that we want to delve into as we
look into the launch of the Regicide, a plate carrier that we've been developing for the past
year so as to have the most strengths and the most capabilities while also being as slick
as possible. So let's get started. So let's start with the Crye Precision LV Embav. Now this was a
plate carrier made in 2012 and launched for United States military usage, and there's not really a lot
of civilians that have original Crye Precision models of this carrier. This one itself is actually
just a reproduction. So then why are we talking about it for this video that is targeted towards
civilian use? Well the reason why is because this plate carrier helps you understand what is
essentially the biggest question when it comes to slick plate carrier choice, which is how does my
plate fit inside this carrier? Slick carriers are very nice, but they only work if the plates fit
with them, and additionally because of the fact that the slick carrier has to not be too baggy
and has to conceal well, you have to consider how do these plates fit inside the carrier. So take
this Crye Precision LV Embav. The way that it fits plates is via the usage of this Dura Stretch on
the front. It does not give a lot of extra space so as to fit a diverse range of plates, but rather
has to stretch around the plate, which can make it particularly difficult to put a plate inside.
So take this for instance. This is a medium plate carrier. This is a medium plate. This is
actually a prototypal multi-curve alloy. Now if I want to put this plate in, I open up like a
standard carrier, I slide it in, and so far it's looking all right. It's looking fairly easy.
Push down as far as I can. As you can see, the plate bag is actually a little too short
for this plate. And again, note, this is not because the plate is wrong. This is a normal
nine and a half by twelve and a half sappy medium, but when I try to put this inside,
it's a little bit of a tight squeeze. With a little bit of gusto and effort,
I can get it acceptably inside. Now here's the interesting part. That tight fitment
is completely intentional, because that tight fitment is also what gives it this aesthetic
and this concealable appearance. But the main problem is, while that works for the United
States military because they have standardized plates that they ship to everybody, in the
civilian market, which has a very wide range of plate sizes, something like this can be a very
difficult design to implement. Particularly because when you look at the civilian market,
we use 10 by 12 plates sometimes, and then sometimes we will use sappy size plates which
are slightly off 10 by 12, nine and a half by 12 and a half, or slightly larger than that. So
civilians may have a very difficult time finding the right plates for their LVMBAV or for plate
carriers that are designed similar to this. So just to make the plate fitment issue abundantly
clear on the LVMBAV, this is a 10 by 12 plate, and when you look at it, it appears like it's
going to fit pretty well, but once you actually try, it's incredibly difficult. And I have fit
some plates into this plate carrier but a little bit thicker, but the entire time you're wondering
if you're going to bust the plate carrier open or if you are simply never going to get it in.
Now, there is one primary reason why this occurs, which is very common in a lot of slit carriers,
including the ferro slickster that we'll get to later, which is when you look at the side of an
LVMBAV or a slickster or something of that sort, this is sewn two-dimensionally, you could say.
There is a front, there is a back, there is no side, which means that once you add something
three-dimensional to the mix, like a plate, then that is going to take up space that was previously
dedicated to giving it width or height. And for that reason, you have a little bit of a
fitment issue. It can be difficult to find plates that fit properly. An alloy plate like this may
not be what's actually intended for this plate, but it happens to fit this plate carrier because
of the fact that it is so thin. And obviously, thinness is also incredibly beneficial for
concealment, which is why we are excited to start getting these out pretty shortly here once
testing is completed. If I had a sappy medium plate like this old-fashioned P2, which is about
an inch thick, it is going to be a very lengthy struggle in order for me to get this inside this
plate carrier. It might fit because of the Dura-Stretch that I mentioned before, but it's
going to be a struggle. Talking really quickly about the features of the Cummerbund, you have
elastic, as mentioned before, and this tucks right into the plate pocket, which means that
you don't have any visibility here. It's entirely slick, but at the same time, there are no other
Cummerbunds that can fit this aside from ones with this three-band design. So there's a little
bit of a modularity problem there, but then also the benefit of being entirely smooth on the back.
You have elastic and buckles so as to help to attach chest rigs and other such things,
and then you also have a little bit of side armor capability with this side armor pouch,
which is pretty nice. And then finally, you have a little JTAC pocket here, a JTAC pouch,
which you can also fit with double stacked AR mags if you so desire. So there's a lot going
with the Cummerbund. It's very interesting, and it certainly fits certain goals very well,
but there's the modularity issue if that matters to you, because you might want to put on a very
fancy structured Cummerbund or something of that sort if you're using it for a more overt purpose.
Well, this carrier is not going to be friendly to that, although it has a lot of other benefits.
Now let's talk a little bit about the pros and cons of the carrier. So the carrier is designed
with Durastretch on the front and on the back, which looks very nice, which can fit a relative
diversity of plates, certainly more than if it were just plain Cordura, and also it holds it
pretty tight to the body, and people describe it as breathable. It's not a very heavy and moisture
collecting fabric. You can see that it lays against the body in a pretty nice way. Additionally,
when you look at the shoulder strap design, you can see that there's a lot of surface area contact
going from the plate up to the shoulder straps, which helps to make it more comfortable. There
is a downside, however, to the shoulder strap design, which I'll demonstrate in just a second.
On the Cummerbunds, you have a very slick back because the Cummerbunds actually tuck into the
plate bag itself as opposed to sitting on top, which helps to protect the Cummerbund, but also
helps it to hug the plate bag a little bit more. However, it makes it a little bit more difficult
to adjust. When I had to take out this carrier and adjust it to my size and tighten it a little bit,
it was much more difficult than a typical Cummerbund that you see in the modern day.
Additionally, if you want to upgrade the Cummerbund or change the Cummerbund, it's not going to be
compatible because this was made as a one design fits the United States military kind of a solution,
so it's not made for a civilian market. It's not made for a lot of mixing and matching, so there's
a lot of things that make it cool, that make it interesting, that make it desirable even if you've
got plates that fit it, but at the same time, it's not optimized for civilian use.
Some of the pros of the plate carrier are that it is very comfortable, it is very good looking,
it conceals very well. Some of the cons are the fact that it's hard to find plates that can fit
it. It can also be hard to find a Cummerbund that works well unless you use the stock Cummerbund
that comes with it. Additionally, there are some complaints with regards to the durability of the
plate carrier because this is a low visibility armor vest. It wasn't really made for over usage,
it's just that people used it and liked it so much that they decided to use it in that way.
This dura-stretch here is not quite the best thing for when you're rubbing up against rocks,
and there are cases where people have actually torn open their LVM valves because of that issue.
And then there is one other slight issue that may have been fixed on later models, but is something
that you do hear complaints about, which is in regards to the way that the shoulder straps work.
In order to make this as low visibility as possible, these shoulder straps do not overlay
on top of each other. Instead, the front bag has a long shoulder strap that tucks into the rear bag
via Velcro here. However, these plate bags are sewn shut, which means that you can't really get
this plate bag high enough if you don't have really, really broad shoulders. That's a complaint
that I've heard from people who were issued original Crye Precision LVM valves, but it's
also something where it may have been fixed on later models, so that's not something that I'm
entirely privy to. Nonetheless, it does highlight a little bit of a trade-off when it comes to this
design. You can maximize the slickness of the shoulder straps by making the front tuck into
the back, but you also limit the ease of use and ease of customization to make sure that it rides
at the correct height. And if you look at pictures of people who are wearing original LVM
on the field, you can see a lot of them have plate carriers hanging really, really low in the back,
probably due to this issue. The final point I want to cover on the LVM valve is regarding
its scalability. So we have the concealability, how well it fits the plates, but then there's
also if you wanted to add pouches to this, how would you do so? As you can see, there's no place
to attach buckles by hooking them onto any laser cut or MOLLE or anything of that sort. However,
there are these secret compartments. Tucked inside the little bunny ears that are on the top
of the plate carrier, you have a webbing. Now this webbing is intended for attaching things like a
TAP chest rig, a tactical assault panel, which are incredibly tall chest rigs, hence why these
things are so high. If you had a typical buckle system, this would probably sit a little bit high,
but you can still scale up your LVM valve by throwing on a chest rig with an independent
harness on top, which we'll demonstrate later in the video as we take a look at all of the options
and how you can scale them up. Now let's talk about the T-Rex Arms AC0, which in contrast to
the LVM valve does not fit plates incredibly tightly and rather is more like a bag, but that
does allow it to carry a wider diversity of plates, which we'll get to in a moment. Now the T-Rex Arms
AC0 was first launched in late 2024 and I remember when I saw it, I was a little bit confused as to
why you would get this as opposed to an AC1. However, taking a look at it, you do realize
it's actually a decent bit more slick than the AC1 because it doesn't have the loop and the
MOLLE for chasm buckles that the previous carrier did, which kind of opens up discussion on what
makes a carrier slick or not. You can suppose it's more like autism and is a spectrum as opposed
to gender, which is a binary. So that's the AC0. It's very much bag-shaped, but what that does allow
is for if I want to put in some very big plate like these old-fashioned P2s, I can slide them in
and it's absolutely no problem. Now I've got very lightweight armor inside of this plate pocket,
which is nice. Then I can take the back and if you look at how the back is designed, you can see
it's actually got a covering for the cummerbund, which is a very nifty feature because it protects
the cummerbund, it keeps it secure, it allows you to modulate it a little bit more, and then
additionally it just tucks right into the plate pocket,
keeps everything secure. I'll take my second old-fashioned P2. Now I have plates in a plate
carrier and it was not at all difficult to get them in. Now what is the downside to a bag design
like that? Well there's a little bit of an aesthetic thing going on where it doesn't really look like
much is happening. You just put plates inside of a bag, but then additionally let's say you've got
some undersized plates. Let's say I've got that prototypal steel plate that I mentioned before,
but now my plate carrier is even baggier. Now when you wear it, your body will kind of push against
it, which I can demonstrate in just a second, but that's not ideal, especially if you're going from
plate to plate as you start to upgrade your kit, get other kits set up. You might go from a thick
plate to a thinner plate and then suddenly your plate carrier, which fit your previous plate so
well, doesn't match it quite as much. So that's something to consider. It's something that is both
a pro and a con. Now talking about the scalability of this plate carrier, one of the things that's
interesting about its design is the inclusion of this horizontal molle, which allows you to
loop certain placards through and then to stick them on like Crye Precision, Haley Strategic.
Armored Republic placards also have a detachable buckle that can then slide through here so as to
stick on and you can attach your placards without any buckles whatsoever, which is a nifty feature.
However, it does take away a little bit from the slick, no molle kind of appearance. So let's talk
a little bit about fitment. The cummerbund is adjustable in the back like we discussed before.
However, it doesn't have anything on the cummerbund, so it's a very simple design. Looking at the
shoulder pads briefly, these are simple Dura Stretch covers of the shoulder straps, which is
very similar to how the LV MBAP is designed. And really, there's no padding on this, but you don't
really need padding for a slick carrier most of the time because of the fact that it's the surface
area, the contact against your body where you don't have sharp edges and you don't have incredibly thin
straps that allows it to be more comfortable. So if I show you how this looks on body briefly,
you can see when pressed against the body, it doesn't look quite as baggy. However, there is
still the edges of the plate carrier that kind of just sit and they're there. So it's perfectly
functional. However, aesthetically and then feature wise, it may not be everything that you might
desire. However, there are a lot of carriers that are very sufficient that simply have this design.
I think this is a perfectly serviceable carrier. There's the Wetworks plate carrier that is the
super slick that is very similar to this, except lacking the protection in the back for the
cummerbund. And they all fulfill just a very simple desire to hold plates. And that's basically
it. Now, if you desire more features out of your plate carrier, then you might want to look at the
next option, which is Ferro Slickster. It is a significant departure from the design principles
seen in the LV MBAP and the AC Zero. It's featureful. It has a lot of things going on on the
front. Particularly, you can see the loop panel on the front for identification if you so desire.
And then it also has laser cuts for the attachment of placard buckles or chasm buckles.
Now, those features may be something you like, maybe something you don't like, but they certainly
create a different genre of plate carrier compared to the entirely slick ones that we just saw.
This may be one of the most popular plate carriers on the market today because it is inexpensive and
it does give you a lot of different things you can play around with. So let's talk about it.
First off, talking about sizing and plate fitment, you can see similar to the LV MBAP,
it is sewn two-dimensionally. And in fact, the AC Zero is sewn two-dimensionally as well.
It's just a little bit bigger. If I want to put a thicker, medium-sized plate, for instance,
this is a little HESCO PE plate. I wanted to just show you that it's not necessarily just
Armored Republic designs, but designs in general, if they are especially thick,
you run into an issue on the side, and that is this seam here. You are taking away from the
width of the plate carrier when you are trying to accommodate for the thickness of a three-dimensional
object. Now, could you fight that and potentially get it in? I think so, but it's not exactly fun.
Additionally, there's a little bit of a disclaimer on the Ferro Concepts website, which is
absolutely no shade to them. If they believe that this is the way that their plate carrier works,
then actually good on them for giving this disclaimer. It says that you should not use
this plate carrier with steel plates or with plates heavier than eight pounds. Now, why a
lighter steel plate like this one, which is under six pounds, might be a problem,
I'm not entirely sure. But when we get to the construction of the plate bag, it may actually
have some revelations on why they put that disclaimer there. So, on the front you have
a plate bag consisting of a mix of Cordura laminates, Velcro loop, and normal Cordura.
This panel of loop normally on a plate carrier would be accompanied with Cordura behind it,
and so you would sew the loop to the Cordura. On the Ferro Slickster, it appears that the loop is
all that's here. So, what you have is this Cordura laminate, and then this panel of
Velcro loop sewn onto the edge of it, and then another piece of Cordura sewn to the top,
and then you have a strip of laminate with loop just as before, no Cordura behind it,
and then Cordura here. So, you've got loop and Cordura going back and forth in this beautiful
dance so as to create a plate bag. And then on the back, what you see is it is this nice soft
foam here. Now, this foam is once again not sewn to Cordura, but rather this is all there is on
the back of the plate carrier. And again, this is not something that I'm trying to shame Ferro
concepts about. I think it's actually very clever that they were able to find materials that could
hold together in this way, because generally people don't complain that their Ferro Slicksters are
incredibly brittle or lacking durability or anything like that, especially if they put in
lighter, thinner plates. But it's just very interesting to examine how they were able to
get this Slick, but then also a little bit more featured. It's not very common that you see padding
on a Slick plate carrier, but given the fact that it's all there is on the back, it makes a little
bit more sense. If I open up the plate bag, what you have here is a squadron panel that allows you
to of course tuck it in, but then it's also got little laser cuts here if you want to attach
perhaps a tourniquet or something of that sort. And then finally, a little funny thing on the
inside. You see this black loop is on the inside here, and then connected to that black loop is a
piece of webbing that is bar tacked to the top. And that webbing essentially runs inside of the
plate bag and is sewn to the top. All that to say, this Velcro loop that secures your plate bag
is not sewn to the middle of this in an X formation like most loop inside of the plate bag is,
but rather it's just sewn to the edge and then kept in place by a piece of webbing that suspends
it, tugging it upwards, which is actually very clever. So that is the Ferro Concepts plate bag,
whereas the LV Embav and the AC Zero are very basic, just Cordura with a little bit of Dura
Stretch and then loop sewn onto it. This one is innovative insofar as it uses these materials
alone and then reinforces them with things like laminates and double stitching. Talking a little
bit about the shoulder straps, you have a system similar to the LV Embav where the front plate
pocket has a shoulder strap that tucks into the rear plate pocket. However, avoiding the issue I
found on the LV Embav, this actually tucks in and it can terminate as low as you would like
and then sticks there, which allows you to get the correct ride height. On the back, you have
a large Velcro field for the attachment of cummerbunds, but you have no cover over it,
which you could say adds to the slickness potentially. In my mind, it's a little bit
more slick to have the Cordura over the top of it so that there's less to see and less potentially
to get caught, but it's not like this is going to accidentally fall off most likely. Additionally,
you have an identification loop field on the back for anything you might want to put there,
say pouches or patches that say don't tread on me and American flags and other such great things,
maybe your name if you wanted to identify yourself. Now, if I take some relatively unheavy
medium-sized plates, slip them in. In my opinion, this is the most fascinating thing about the
Ferro Concepts Slickster, which is that when you put plates in it, it doesn't really change
in appearance at all. You're not really seeing those plates. Rather, the loop fields tends to
cover up the shape and it looks just about the same as it was, just a little bit thicker. On
the back, you can see it's not that this is hugging that plate significantly. It's just
there, particularly with the fact that you've got the Cordura laminates throughout. Those,
in contrast to something like Durastretch, which we saw in the LVMBAV, are not going to hug things,
but rather going to sit and kind of be independently structured, which is exactly the kind
of archetype that I think the Ferro Slickster represents. And there are plenty of plate
carriers that are also similar to this. When the heli-strategic thorax incog came out,
I saw it as something similar to the Ferro Slickster insofar as it has a loop identification
field. And then shortly after it was released, they added some laminates so as to have laser
cuts. Those are things that people add so as to make it more than just a slick carrier.
A little bit more, more like a AC-1, you could say, with enough things to identify yourself or
to add placards in the more simple, intuitive ways, but then also not as much as something
like a thorax or an FCPC, the more built-out variations of plate carriers by those two
companies. So, is there a practical usage for this? Well, of course there is, because of the
fact that if you're hiding this under a hoodie or something of that sort, it may very well be
very concealable. It may be easy to not have this loop identifying yourself, but rather just
there, part of the structure of the plate carrier. You can ignore it if you do not like it. However,
if you do not like it, you may not want to use it at all, and you might want to get a
different design. So that's entirely up to you. Talking briefly about the fitment, you can see
sitting it on the table versus suspending it against my body, it looks about the same because
the laminates and the loop do not showcase the plate nearly as much as the Plane Cordura or the
Plane Dura Stretch that we saw from the other models, which is a pro and a con. It means that
if your plate does not fit the plate carrier very tightly, then there's basically no downside to it.
And if you have a really big plate, then it doesn't matter either. But if you like to have
a plate that really is appearing slick, presenting slick on the front of your body, then something
like this is going to be perhaps a little bit of a downer. Perhaps you think, I don't want all of
this loop here. I want to showcase the cool aesthetic of having nothing on the front.
Personal aesthetic preference. So if you like this kind of design, you can go for it. When I
see a design like this, it reminds me a lot of the Armored Republic Invictus Plate Carrier,
which has a lot of laser cut laminates, etc. And it is similarly low profile. If you want to conceal
it, you certainly can. But then also, if you want to scale it up and you want to use the laser cut
molly, then you can do that as well. One thing that I often wonder about the Slickster is,
if you're going to run a plate carrier like this and you're going to have laser cuts and laminates,
etc., why not have laser cuts on the loop field on the bottom as well so that you can
use various pouches that you attach there? I suppose one thing is it adds a layer of complexity.
If you've got a Velcro-based cummerbund, you would need to add quick detach or you need to add an
extra layer that you can put the cummerbund underneath and the laser cut molly on top,
and then whatever you've got on the molly. So there's a bit of complexity which could add to
the cost. But at the same time, there's nothing really to complain about this design. It works
and is perfectly serviceable. Now let's talk about how you could scale up a plate carrier,
any one of these Slick Plate Carriers, if you had one and you wanted to add some pouches to it.
So this is, first off, the Faro Concept Slickster we were just discussing. Now I've attached one
placard and then a dangler. I have the Armored Republic Mark 1 GP placard here, chasm buckled
to the top of the carrier via the squadron laser cuts that we talked about before. And now I've got
some mags here. Inside I have Epstein files that I got from Pam Bondi's desk,
and it didn't really help, they were all redacted. And I've also got a tourniquet,
dangled from the bottom of the placard, and a med sleeve that I've attached to the front.
You could also attach this to the bottom of the plate pocket if you so desire. I'm using the
elastic cummerbund here to attach a couple more mags, although admittedly this one is empty,
which would be not very practical. This one has ammo though. And now I've got five mags,
as well as a host of useful documentation and medical. So if you wanted to scale up your Faro
Slickster, it's pretty simple. You'd basically do it with any other placard systems that you
could find. But let's say you have one of the other slick carriers, ones that do not have
attachment buckles, then let's talk about that. Now let's talk about how you can scale up an LV
MBAV or an AC-0 plate carriers that do not have the more scaled up laser cut chasm buckle slots,
etc. So you can't just hook a placard onto the front of this plate carrier. How are you going
to get all of your magazines and equipment? Well, the answer is pretty simple. You're going to use
a chest rig, such as this very large RRV with Armored Republic pouches on the top of it.
So now I have not just the protection, but also the entirety of my setup here. I've got a pouch,
a general purpose pouch on the side that's holds my water reclamation and other such needs,
navigational equipment. I've got a ton of magazines. I've got this magazine in what
probably should be a radio instead, so as to keep me more well informed. And then I could probably
add a canteen pouch or some other sort of pouch on the front. So I've got my body armor and then
I scale it up instantly via a independent chest rig using an independent harness.
Now, one of the benefits of this system is that this harness is very comfortable. This harness is
made to hold all of these pouches, whereas the Ferro Slickster shoulder straps may really only
be intended for the body armor and maybe a couple of things on the front. But I don't want to
overload the system. With this system, I can be sure that my plate carrier is going to be totally
fine because it's not carrying much. It's the harness here that is carrying all of the heavy
load. So that is one of the benefits of having an incredibly slick carrier. You can throw something
on and it's absolutely no problem at all. This is really one of my favorite setups right now,
although instead of an LVMBAV, I have the Regicide plate carrier that we mentioned before
because of how easy it is to scale it from nothing or just protection to a bunch of
different features. There we have three archetypes for slick plate carriers on the market right now.
We have got incredibly tight plate carriers around the plate. We have got essentially just bags that
you hold plates with. And then you have more independently structured, more built out systems
like the Ferro Slickster. Now, in terms of which one you find preferable, that's totally up to you.
It's something you can explore now that you have these systems in your mind, which is exactly what
we want to give you as you look at different options. Personally, my favorite is going to be
the ones that can hold tight to the plates. But when we look at the designs behind the Regicide,
one of the main things we were looking to do is take that concept of fitting tightly around the
plate while also making it able to fit a wide diversity of sizes. And so the way that we were
able to do that, I think is very interesting and we're excited to show it to you.
