Crye Precision JPC 2.0 Swimmer Maritime vs. Standard 2.0

Ballistic Lab
1 follower
1 Video View·Jan 1, 2026
Crye Precision JPC 2.0 Swimmer Maritime vs. Standard 2.0
Alright, hey guys. Tonight I got a request to go over the Maritime Cut JPC and kind of explain
the differences between it and a standard JPC. So that's what we'll do. It's not a whole lot of
back and forth that really needs to go along with this video so I'll probably just focus on this
and if you've got any questions on what this is lacking, in addition to whatever I mentioned
tonight, just hit up that Cry Family video and it'll answer any questions that might come up.
Alright, so this is a Swimmer Cut Maritime JPC 2.0 which, according to the label,
Cry calls a JPC 2.0 Swimmer Cut Mesh. Alright, and this happens to be medium so
take that for what it's worth but it should carry over pretty well if you,
I don't know, have some oddball question with how a small or a large would work.
Alright, so Cry has their lineup of maritime pouches that you can get to pair with this or
regular JPC if that's your jam. I don't have any of those. I don't necessarily need them.
This one kind of fell into my hands so I haven't really gone down that road.
But what you're looking at is a mesh plate bag. Alright, bottom half not so much because you've
got the Velcro field for your AVS flap and your cummerbund attachment and then you have
full Velcro field there but that is on top of a mesh base, just like the top here.
And then basically it has all of the same functionality as a standard JPC 2.0 with the
exception of the admin pocket. Alright, so full zipper compatibility on the back. I verified this
will work with your standard back panels as well as, you know, whatever else you're bringing to
the table. It'll fit your standard JPC back panels. It has the same routing for the cummerbund.
Alright, so again you kind of lose that sixth column if you're not using a back panel.
And then, you know, being a swimmer cut, the top portion here not as functional but really
who's putting a whole lot of stuff up there that's not using a back panel anyways.
Alright, going back to the front. Full AVS panel compatibility there. It does have the
webbing loops for mounting your side release buckles for placards. I will say
I would probably avoid doing that on here just because that is sewn directly and only to mesh.
Alright, there's no backer inside there so I don't know how much continuous wear I would really want
to put on this. That being said, I don't think you're going to have any problems with a placard
as little use as that's going to get, you know, just opening and closing. It's not really putting
much tension on here. It should all be on the Velcro on the front. Alright, you still have
your quicked off shoulders just like the 2.0 and you still get some semblance of a shoulder pad.
Granted, the regular 2.0 is just like a tweave that really just contains the shoulder strap and
keeps your Velcro from pulling apart. What's neat about the Maritime one as opposed to the
standard JPC is it's a tri-fold so you do actually have a little bit of usable routing there. You
could put, you know, like a cat tail through there, maybe hydration line if you really wanted to,
although that would be pretty snug on there. But you have it and with the mesh, granted it's not
much, but you do have kind of a little bit of padding there over just the tweave sleeve that
you get with the standard JPC. Alright, other than that, shoulder straps are functionally the same.
The quicked off capability on the front is a little bit refined over the 2.0. On the 2.0,
you have kind of some unruly straps there where these two webbing extensions are designed to run
right parallel with the edge of the Velcro there, and then you have a much wider handle
when it comes out, which is easier to grab for sure. But I find that in use, it is a little
unruly. They just kind of have a mind of their own and they go wherever they want. This one,
while you don't have as much to grab onto, it's much better contained and you don't lose that
top and bottom Velcro continuity for your placard. Alright, as you can see, we've got the
snap on the AVS panel and there is a corresponding snap just like on the regular JPC. And then if we
open this up, you will see that our plate bags on the inside are very, very similar to the JPC 2.0
in that you have that tweave stretch panel on the edge of the plate bag with mesh in the middle
and slightly different mesh up top. This is more of a spacer mesh versus just a drainage mesh.
So you do have the stretch panel containing the sides of the plate as opposed to just the mesh,
which would be a high wear area. So it's nice that they put the tweave there. You still have
the tri-glides or ladder locks there for your one-band cummerbund. And looking at the front
plate bag, you have the D-rings there if you're using the JPC-specific side plate pockets.
So you can mount them direct to the front bag, which I have not messed with those at all,
but heard good things. And if I need side plates at some point in time on a JPC again,
I will probably give those a try just to know what they're all about.
The cummerbund is still kind of that reinforced skeletal cummerbund,
functionally the same as a JPC-2, if not identical sans the pull tabs there.
And yeah, nothing of note on the back other than the mesh. I don't know,
maybe potentially a little load bearing along the side there, depending on how your plate sits in
there. I'm currently between swimmer plates, so I can't kind of show where that tension would fall,
and I apologize for that. And you do have a drag handle, but really
on the Cry, especially the JPCs, it's more of like a carry handle for administrative purposes
than a true drag handle. I've never had any issues struggling to grab the shoulder strap
should I need to, so I just go with that for pulling. All right, same Hypalon going into
the shoulder straps. Functionally identical to a traditional JPC, except for the missing
admin pocket. So it's kind of the in-between of an SPC and a JPC in that you have that inherent
drainage at the cost of the admin pocket. And then obviously you can't really use the
structured cummerbund with this to any value. But that is the Swimmer Cut Maritime JPC 2.0
in a nutshell. Yeah, I don't know. I like doing requests. This one was kind of a low-hanging
fruit, so it should have been covered a while ago, and I apologize for that. Thanks, guys.
