Decorative Coil Demo

Sculpture Work
8 followers
21 Video Views·Jan 2, 2026
This video is going to be about decorative coil. So I have coil already rolled out,
and I have a piece that's in the process of being made. So I have done two layers up,
smoothing both sides, so that the base has some structural stability, so that it's okay.
Whatever I do next, the base will be able to handle it. And again, you want to smooth
everything out before you start working on your next layer, because you can
work yourself into a corner where you can't reach in somewhere to smooth it easily. So
just do that ahead of time before you move on. Smooth each thing before you move on.
So for decorative coil, there's so many different things you can do, and you can get creative with
it. I often put up those posters that show you lots of different types of decorative coils.
You can come up with ones that are not on that list. Basically, anything you make out of this
where we're keeping the design of whatever you've done is a decorative coil. With decorative coils,
the backside still has to be all the way smoothed out. If the backside is not smoothed out,
that decorative coil is most likely going to fall off in the kiln, because there's nothing
actually holding it there. There has to be some element of smoothing the clay on one side
to make sure it stays. And again, whatever thickness your coil has, it's going to thin
out a little bit in the process. So if it's this thick, once I get it on here all attached,
the wall is going to be a little bit thinner. So let's just make a couple different ones.
I'm going to do some spirals, maybe some wiggly guys, and maybe some coins. Alright, so anytime
you're asking the clay to really stretch and do anything difficult, give it some extra moisture.
Just like if your hands are really dried out and cracking, moving them, asking them to do anything
hurts. So if your clay is dried out and you ask it to move, it's going to hurt and it might break
and drive you nuts. So just give it some lotion. The lotion for clay is water. Alright, so now
that's lotioned, I can start really manipulating this and it doesn't even think about cracking,
because I've given it some nice moisture. For my spirals, I like to do a diagonal cut
so that it winds up looking like this, like a little snail shell. One side of your spiral
should be smoothed before you even think about joining it on. Just think about this. I put it
on here and now I'm trying to smooth it while it's sitting up in midair. That's tough. I'm probably
going to warp it in the process. So just set it down, pick its pretty side, set it down pretty
side facing the mat, and smooth this side. Alright, so I'm going to get rid of the spiral on this side.
Again, using whatever clay is there, any extra clay, to smooth over everything so I'm not seeing
any seams. Alright, so one side, totally smooth. The other side, still a beautiful spiral.
Now I get to join this on. Again, a little bit of water, because we're not slipping this boring,
and I decide, do I want my decorative coil on the inside or the outside?
Right, now if I just stick it here, there's nothing holding it on. So we got to,
I'll switch it back to this side for you, smooth this piece down into the layer below it, just like
we do for the rest of the coils too. And we also want to, we might have to use a tool, kind of
smooth it on the side as well. And once everything goes in, they'll kind of be nestled together,
holding themselves up. But right now, this guy is going to be really fragile,
and all the next ones I put will be fragile too. It's just the nature of the game.
So I'm going to try and smooth this back side, and I'm just pulling the extra clay
in that piece, down into the layer below it. If you have extra clay in the base itself,
pull that clay up. Wherever there's extra clay, oh my piece is cracking, there's too much water in
wherever the extra clay is, is where you're pulling the clay down. Right, so now this guy's
a little bit more sturdy than he was. Might even be able to pick him up. Right, whereas before,
he was just falling off. Now if you're rough with it, it will fall off, but just don't be,
just don't be rough with it. I'm going to smooth it a little bit on the side,
just pulling a little bit of clay down to join it on the sides as well.
Just as a little extra stability. All right, so that's one type of decorative coil,
and if you want to do a little bit of smoothing here too, you certainly can. Maybe just pull a
little bit of that clay down using a tool to join it. There's not actually a ton of clay holding
this piece on, so if you're rough or not careful, you can definitely knock it off pretty easy.
All right, so that's a spiral. Let's work on another one real quick. So we can also do,
I like to do kind of these squiggle ones.
Whenever you ask it to do anything crazy, give it some moisture, give it the lotion.
I like to do these M's where you're kind of just going up, down. You can go as long as you want,
and eventually, you should stop eventually. Chop it off. All right, before I add this onto that,
I am smoothing one side. Take your pretty side, put it face down,
use one hand to kind of hold it in place, and then you're pulling the extra clay to fully smooth it
out. So if I look at a decorative coil from the back, it shouldn't even look like a decorative
coil. It should look like a little pile of clay or almost like a little thick slab, right? Like
that. Doesn't look like much. Look how nice that looks. So these can go up, these can go sideways.
I think for mine, I'm going to go sideways. I also like to smooth the bottom a little bit
so it has like a flat surface to join onto. That's easier to join than something like that.
And the nice thing about these guys is they can curve to match your piece. All right, now on the
back side, what I need to do is pull that extra clay down and actually cover the seam. Do it on
the sides as well, and I'm joining my spiral sidewall to this decorative coil sidewall. So
I'm also going to be smoothing this way. All right, and I'm deciding that I want these final
downward ones to kind of just smooth into the piece altogether so it kind of looks like the
clay just did that and then rejoins. So you can do cool things like that. So that's looking pretty
good, and when you look at the inside, it's smooth. All right, I'm just going to do a few more because
really, you experimenting, you're going to figure out what you like to do.
All right, I'm going to do some coins with a thicker log that I haven't rolled out yet,
because this is something you can do too. So these guys are called coins. While cutting them,
they usually get a little distorted, so just fix them up before you go to join them nice and round.
And these can be put in just like a decorative coil, even though it's more like a little slab,
right, came off of the coil, which will make every coin I cut be the same size.
So this guy could get joined as a coin. I could do some smaller coins to kind of fill it out.
It's a great way to get a little Mickey, who knew? All right, so that's one thing you could do.
Again, I'm smoothing these guys out on the inside before I move on to the next thing.
All right, and if you have little holes like this, you can decide if you just wanted to stay a hole,
because this thing's not going to hold water, or are you going to shove a little piece of clay in
and smooth it out on the back side so that there's no hole. And sometimes you need more.
So I could finish smoothing all that out to have decorative coins on one side.
You can also just straight up do spheres, or like some of these guys, like posts almost.
You could do a bunch of posts in a row. So a bunch of these all in a row, lay them out,
smooth one side so that they're all stuck together, and then you can stick that on there.
You could do one single post and stick that on there, and then do something else.
You can also just do straight up spheres. So take a little bit of coil that you've cut,
and roll it between your hands like you did play-doh as a kid.
That can be a decorative coil, technically. It's not a coil, we know that. So what I would
to do is smooth it on one side and leave it showing on the other. So this is a cool way
to get kind of like a 3D bump. But there's so many types of decorative coil you can do. You
truly kind of don't know what you like until you start messing around or looking at examples on
the internet. But no matter what, one side is smoothed. You pick which side. If you want your
decorative coils on the inside of a bowl, totally fine. You're going to be smoothing the outside.
You want your decorative coils to show on the outside? Fine, smooth the inside.
All right, one side has to be smooth, or this thing is going to fall apart on you.
