Basics of Ceramic Handbuilding Pinchpot Coiling Slab Building

History culture hero
16 followers
7 Video Views·Jan 31, 2026
In this video you will be introduced to the basic hand building techniques
which are essential for anyone looking to learn how to work with clay
to build a variety of objects by hand rather than on the wheel.
The three techniques we will be showing you here include pinch pot, coiling and slab building.
Here are the tools we will be using in this video.
For more in-depth information about these tools please see our basics of ceramics video here.
Before starting any project with ceramic clay,
you want to make sure that your clay is soft and consistent.
You may also need to prepare your clay by wedging it first,
which is a kneading technique that extracts all the air from the clay
and unifies its consistency and particles.
You may use a wire cutter, dental floss or string
to cut and divide the clay into smaller and more manageable pieces.
Make sure to store any extra clay in a damp towel or airtight container to prevent it from drying.
To build your pinch pot you will want to start with a ball of clay roughly the size of your palm.
The smoother you can get this to be the better.
Next take your thumb and push it down to the center of the ball.
From there you can use your thumb and fingers to pinch the clay open
and you'll want to do this very slowly and gently to avoid cracking your clay.
Take your time doing this.
It's always best to maintain the consistency and the thickness all around the pot
and thin it down very gradually rather than do it too quickly.
Don't forget to pay attention to the base of the pot as well.
It may take some practice to get the shape and the height that you need
so just be patient and make sure to practice your technique often.
Every now and then you will want to go over the pot and smooth down any lines or cracks
that may appear on your clay.
Coiling is a hand building technique that uses stacked coils or ropes of clay
to build forms and vessels.
What makes this technique great is that it could be used to build height or organic forms
or it could be smoothed down or used to create intricate designs.
To make your coils take a small chunk of clay and begin shaping it in your hand into a thick roll.
Try to use soft clay for this as it's the best.
Next you can start rolling them out on your table
and to get a perfect coil you will want to place both your hands in the middle of the coil
and then gradually move them outward as you roll out your clay.
You also want to make sure that you are using the entire length of your palm to do this
and avoid short movements.
Coils can dry pretty quickly so make sure to cover them in a damp towel while you're working.
To start building the pot you will first need to create the base
which can be done using the pinch pot or the slap techniques
or simply flattening a ball of clay down to an even disc.
To attach the coil to the base you will need to score them both
by using a pin tool or a scoring tool
and then applying slip to the scored area on the base.
Align your coil on it and gently press down to make sure that it's sealed.
If your coil is not long enough you may simply cut a piece from another coil
and attach it in the same way to complete a full circle.
You can then use your thumb to attach the ends together.
From there you can start stacking your coils using the same idea.
Score both sides that you will be attaching to each other
and then use slip to bind them together.
Once you have a few layers stacked you may use a wooden tool
to smooth down the lines of the coils into a flat surface
which can also serve to make the piece stronger.
You can choose to do this on one or two sides depending on your own preference.
To make the wall of the vessel adhere better to the base
you may attach an additional smaller coil on the inner bottom corner
and then smooth that out as well.
You can also use a damp sponge or a brush to clean up the coils from excess slip.
Coils can be used in so many ways than just straight lines.
Take some time to create some designs with your coils
which can then be used to stack and build the wall further.
Slab building is a technique that uses slabs or flat sheets of clay
to shape and construct forms or drape on molds.
What makes this technique great is that it can be used to build objects
that require flat surfaces
or even used to press texture on it while it's still in its flat form.
You may roll out your slab using a wooden rolling pin and a pair of rolling guides.
The rolling guides serve to help us maintain an even thickness throughout the clay.
So start by patting down your clay using the heel of your palm
and then use the rolling pin to spread it out.
From time to time you will also want to lift your slab
and rotate it or flip it around which will help you control the shape and size of it.
And it will also help unstick your clay from your table which will make it easier to spread.
Using a rip tool will help you smooth down the surface of the slab.
Simply glide the flat edge of your tool on the clay
keeping in mind to start from the top edge to the bottom.
You don't need to apply too much pressure while doing this
and don't worry too much about the edges.
While your slab is still flat you can use a variety of tools such as ribbon tools,
texture rollers, stamps or even leaves to apply texture and designs onto your clay.
Of course you may simply use your hands to shape your clay into any form that you like.
However one way to create different shapes is to use plaster molds.
As you can see here we've used a drape mold to create the form of a plate.
Simply drape your slab on the mold and compress the clay around it using your hands.
You can then cut off the excess using a clay knife
and the same technique can be used on a variety of different shapes and forms.
Another way to roll out your clay would be using a slab roller
and this machine allows you to control the thickness of your clay
and is more convenient if you're working with larger pieces.
So if you're using a slab roller in your local pottery studio
you may ask the staff there to assist you or teach you how to operate it.
Again you will probably want to smooth down the surface of your slab before using it
depending on your own preference of course.
Next you can cut up shapes from your clay which can serve as the base,
walls and top which you can later on combine to construct an object.
You may also use templates to do this.
To combine the pieces together remember to score both pieces and apply slip in between.
We hope that you found this video informative and helpful.
Please be sure to check out the rest of our videos
to learn more about how to create fun ceramic projects.
