BCS/Beez Combat Systems Cummerbund and Defense Mechanisms Side Plate Pouch

Ballistic Lab
1 follower
2 Video Views·Dec 17, 2025
BCS/Beez Combat Systems Cummerbund and Defense Mechanisms Side Plate Pouch
All right, so we looked at the defense mechanism plate carrier without the cummerbund because,
like I said, it had an aftermarket cummerbund on it from a different company,
and I didn't want to muddy the waters too much there. So we'll look at the cummerbund,
which is a Bees Combat Systems, I think BCS, I don't know exactly what it stands for, I'm sorry,
kind of from their Aptum line. So it's a kind of a cool-looking laser-cut cummerbund
with the ferro style attachment. So you've got Velcro front and back
with a decent amount of adjustment. This one looks like it would probably be a little small on me
without paying out a lot of Velcro and then potentially exposing some hook on the back,
but that's not really anyone's fault, and I'm sure these come in multiple cell sizes
on BCS website. So you can definitely figure out what size cummerbund you're going to need,
you know, kind of three inch increments from the cells and then six inches front and back
of potential adjustment on the Velcro. It does fit M4 mags very nicely, and then we've got the
Buffalo 3D Solutions Bofang shell in the cell here. That fits in there just fine. I didn't
really sink it all the way down, but you could, and then you could have a Bofang in the cummerbund.
You could run that up front if you wanted, you know, front mounted radios, then do it however
you want, but it does fit all those things very nicely. The retention on the M4 mags is no joke.
It's not going to come flying out of there, but you also have the provisions for a shock cord tab
on the cummerbund. You can see front and back, you have the availability to run some shock cord
there. You do have laser cut molly on the front face of that all the way across, which is going
to be a little bit goofy for mounting. This is kind of like a three column setup here between
these two and then five columns total, so something like the Unobtainium Gear 5 pistol cell
would work to give you five pistol mags or some semblance of GP space on top of this cummerbund.
It would also cut down on the stretch from the the cummerbund portion itself,
if that was something that you wanted to do. Otherwise you just, you know, put a three-wide
pocket on here and then you'd have a little bit of stretch left over, so you'd kind of have to
play it by ear and figure out what exactly you wanted. On the back side of this, he has the
defense mechanism's side plate pocket zip tied on there, so I don't want to take it off, but it is a
four-column pocket there, so if you've got internal molly on your cummerbund, you can mount these on
there, but that's kind of your only option. You have to have an internal molly to make these work.
You do have some nice spacer mesh on the inside and then it's secured with a velcro
flap here. My side plate pocket, or my side plates, excuse me, are super buried right now
and I apologize for that, otherwise I would get them out. It looks like it would safely fit
MSAP side plates, the cool tan ones. I don't know about the green ones. I think the smaller
green side plates would fit in here side to side just fine. Closing the top might be a little iffy.
There's not much room for error on this flap, so it'd be neat to see the velcro run further down
with potentially the hook on the inside and then give you a longer loop covered flap
to get in there. The hook wouldn't cause any issues if it was on the inside of the pocket
and then if you had the loop, if you had the really tall plates and it was long enough, you
would still be fine because you'd have loop up against you, and then if you had the shorter
plates, you could just sink that further down in there. So, nice simple side plate pockets that
would work well on something like the ANA Tactical armor compatible cummerbunds because
they are molly lined on the inside. Four columns would line up just fine and then you've got the
spacer mesh for some padding on your side plates. So, I think they're good pockets. It's just a
matter of getting the right side plate for the pocket and sometimes side plate dimensions
are a little liberal with how small they're measured. The big green ones, I haven't found
fit much of anything out there. This might be the smallest package that actually fits those things,
but there you go. That's the Bees Combat Systems, I think is what they are, sorry, VCS
cummerbund with the defense mechanism side plate pocket on the inside. Thanks!
