I'm back to work on the On18 Thunderbird Route 66 roadside attraction themed mini-layout this week! Taking care of a few odds and ends with various projects like building a sturdy pen for Thunderbird's resident bison, painting the 3-d printed buffalo, and finishing up the Teepee Village with LED lighting effects for the campfire and some awesome details from Thunderbird collaborators Gary Beatty and Robert Kurner. Let's hit the road!
All music courtesy YouTube Audio Library, creative commons license.
Howdy folks. Dave here at Thunder Mesa's
studio where I am a little bit behind
schedule but still moving forward. And
this week I want to get back to work on
the O18 Thunderbird layout. That's the
Route 66 themed mini layout that I'm
working on in collaboration with Gary
Batty. I want to jump back into the
Thunderbird layout because of all the
projects I have going on here at the
studio, this is the only one that's
really timesensitive since, you know, I
want to have it done by April and I have
other modelers that I'm working with who
are counting on me. I don't really have
a big project to get done for
Thunderbird right now. What I have is
sort of a grab bag of smaller projects
that all need to be finished to move
this project forward. So, that's what
we're going to be working on this week.
A little bit of this, a little bit of
that. Got a lot to do. So, let's get
started. And I think the first of the
little projects I want to work on is the
Buffalo pen. This is one of the
attractions here at Thunderbird. And uh
Bob Kerner, one of the other modelers
who's helping us out with the
Thunderbird layout, was kind enough to
send us a whole selection of 3D printed
buffalo. Now, I've chosen three of them
to fit inside the pen here. So, I need
to paint those up to look like American
bison and uh build a little pen for them
so they uh don't wander off. And I'm
going to start by getting a primer coat
on these 3D prints with this Rustoleum
dark brown camo.
While I wait for that primer to dry on
the bison, I'm going to go ahead and do
some work on their pen here.
Start by sketching in the outline of
little water hole, little pond for them.
I could dig this out now with hobby
knives and other tools, but there's a
much easier way to do this. Just going
to take my heat gun
and I'm going to melt it.
Just run it over that until we get a
nice little depression.
That's probably good. Don't want to go
too deep. Now I want to repaint this.
And I've added a lot of uh burnt umber
to that scenic base color because I want
this to be a kind of a muddy murky pool,
which it would be if there were buffalo
around. Now I want to start cutting some
fence posts for the actual corral. And
it needs to be pretty heavy duty, you
know, more heavy duty than you would
need it for horses or cows cuz buffalo
could just lean on the fence and knock
it over. So these are u pretty close to
uh 12 in in diameter at scale these
dowels. So and for the height they need
to be pretty tall too. They need to be
about uh 4 and 1/2 or 5t tall cuz you
know buffalo can be 6' high at the
shoulder. Actually, I decided to cut
them about a scale 8 ft long and then
sharpen one end like that. That's just
putting in an electric pencil sharpener.
Pretty easy. And that way I can just
poke a little hole in the foam
and they can go right down in there.
and little Eileen's tacky glue on there.
That should hold them in place just
fine. We don't want those buffalo
getting away. So, I need one, two,
three, four, five, six, seven, eight,
nine, 10, 11, 12, 13, 14 of those. Now,
I've stained all of these using a a
Minwax dark walnut stain marker
because that color is a good match for
creassote.
And uh my thinking is that they would
have used old telephone poles for this
that were scred. So they would have that
creass that dark creassote coating on
them.
Now I'm just using some Een's tacky glue
and pushing them down into the foam. Put
them all about um 8 feet from each
other. honestly is probably too far
apart for Buffalo, but you know, little
creative license there. Little modeler's
license. I'm putting these in just like
uh real posts on a ranch going down into
the soil about 2 feet. For the last two
posts, I cut those taller
about 12 scale feet
because uh going to be a gate over here
to get the buffalo in and out of the
pen.
Okay, now with the fence posts in place,
I can go ahead and dirt this in.
This is just some tan sand from my
collection.
pretty good match for the uh scenic
base.
Probably easier to do this now than uh
than to wait till after I have the uh
lateral
fence pieces in place.
Three big bison in here. There wouldn't
be any rocks or anything. It would all
be ground down to a fine powder.
Besides, buffalo love to roll in the
dirt and wallow.
So, I'm just going to take one of the 3D
prints
and uh
put buffalo footprints
all throughout the corral here.
There are buffalo in Arizona
up uh
up near the north rim of the Grand
Canyon.
They're a little smaller than the ones
you find uh at Yellowstone,
but we do have them.
Now, to hold this down,
going to put a fine mist of wet water on
there. This is just regular tap water
with a couple of drops of liquid
detergent in it to break the surface
tension. And now I just dribble on some
diluted white glue. Let that soak in.
This is good old regular Elmer's glue.
Diluted about 3 to one with water.
And you know you've got enough when you
see it pooling up white on the surface
like that. And sprinkle on a little bit
more sand here and there, places I might
have missed.
And uh let all this dry overnight.
Well, I've let this dry for about 24
hours. So, now I can model the water in
our little pond or puddle here. And for
that, I'm going to use some Envir light
two-part epoxy resin. It's ideal for
modeling calm still water like this.
Now, this Envir is a 50/50 mixture.
You've got the resin itself and then the
hardener.
And uh I don't need to make too much of
it. It's a pretty small pond. I'm still
going to end up making a lot more than I
need probably.
Pour that out in here. And now I want an
equal amount of the hardener,
but try to get it as close to 50/50 as
you possibly can.
And yes, you're right.
I probably should be wearing gloves
while I do this. Now, we mix this up
best we can.
Now, right out of the bottle,
this stuff's going to dry completely
clear.
But we want a dirty, muddy, murky pond.
So, I'm going to add a drop or two of
some Vallejo brown.
Not too much.
Mix that in there. See how it looks.
And then a drop or two of green.
Again, we mix that up. Well, that looks
like water that's had some buffalo
standing in it and maybe pooping in it,
too. We don't want to wait. Go ahead and
pour this.
It's going to find its own level. You
always want to make sure there are no
holes or anything for the epoxy to leak
through because if there are, it will
find them. Trust me, I know.
Add a little bit more.
When you first pour it, especially if
it's cold, you're going to get kind of a
rounded shape, but um it'll settle down
and flatten out as it starts to cure.
So, best thing to do is leave it alone.
While that epoxy is curing, there's no
reason why I can't finish up the rest of
the fence.
Cut these horizontal pieces. These are
some coffee stir sticks.
And they scale out to be about 3 by9
in O scale.
So it's pretty heavy duty board, which
is what you want. You also want to make
sure you do like I'm doing here and
affix the horizontal boards
to the insides of the posts and not the
outsides.
And if you've ever had horses,
you would know why that is
because uh animal will just lean against
those boards and knock them right off if
they're attached to the outside of the
posts. So, it's a lot stronger to attach
them to the inside.
Now that this resin has been curing for
about 15 or 20 minutes, you get a lot of
air bubbles rise up to the top and it's
easy to deal with those. Just take a
these lighters
lightly over the surface
and it's going to break all those air
bubbles.
Just make sure you don't uh set your
fence on fire.
I've got the last of the horizontal
braces in.
So now I want to add a couple of 45°
angle braces on each side of these gate
posts
to strengthen those.
And I've got some 12 by 12s I'll cut for
that.
Now I want to tie these gate posts
together
with another one of these logs across
the top.
But I'm going to notch it
so it fits down on top of there
just like that.
That's just a little whittling with a
hobby knife.
Get some stain on that.
and glue that in place with a little bit
of een,
but I'm going to wrap the joints with
some rope
to give it a nice decorative western
look. So, this is some size 10
crochet thread, natural color.
Start by gluing one end right there.
Go under
and back over
and around
and over.
And we do this
five or six times
till it looks convincing
and keep it nice and tight.
Back in the Old West, they would have
done this with braided rawhide.
Braided rawhide rope.
And when it dries, make a super tight
joint.
And we'll snip it off right there.
Okay. Now do the other one.
Once the thread is in place,
come back and stain it with my
watercolors.
Grimy, dirty
grayish brown here.
All right.
Now I just need to build the gate. And
here is the gate that I came up with.
Basically made from some scale 8 by8s.
But I wanted it to have the look like it
had been repaired many many times with
whatever
uh was handy, you know, be it rope or
old pieces of board or whatever. So uh
that tells a little story there. The
buffalo are kind of hard to keep in the
pen. and they're always wanting to get
out.
And then for hinges,
these are actually just uh cut off
pieces of toothpick. I wanted some big
beefy hinges. And the latch
is just a piece of plastic from my scrap
box, which looked latch-like. So now I
just need to glue this on. Little bit of
uh Eileen's tacky glue. Not an operating
gate.
I built operating gates before
um on other projects and found that I
never once opened them. So, this one's
going to stay closed and that'll help
keep the buffalo inside.
All right. Well, let's paint some
buffalo. Now,
as I mentioned earlier, these are 3D
printed buffalo
that uh Bob Kerner sent to me.
Uh, you can get similar ones from mini
prints.
Now, I'm going to mix up a kind of a
lighter shade here. This dark brown that
I primed them with is an excellent
starting point. That's a That's half the
paint job right there.
I want to mix up something a little bit
lighter.
So, I'm using some Vallejo leather brown
and a little bit of this Apple Barrel
light mocha.
Mix those together.
Get most of the paint off the brush
first
just to bring out the musculature and
that 3D printed detail.
Buffalo love to roll in the dirt, so
they're always a little bit dusty
looking.
You can see how that dry brushing
already
starts to bring out the detail on this
uh on this guy. So, I figure we got a
bull and two cows here. This is the
bull. This is uh his name is Bill. Billy
Billy Buffalo.
And then we've got Bonnie and Becky are
the other two.
I decided that just now. And you guys
all know Murphy's law of dry brushing,
right?
There is always more paint on the brush
than you think there is. That's why I
keep a piece of cardboard, a paper
towel, try to get 99.9%
of the paint off the brush. Of course,
the most distinctive thing about the
buffalo is the that shaggy hump,
which is lighter color
than the rest of the animal. Often a lot
of red in that uh that shaggy fur.
And again, I'm just dry brushing it on
and hitting the high spots. Now, I'm
using some of this territorial beige,
kind of tie everything together and
unify it. So, I'm just building things
up in, you know, thin layers of dry
brushed color. That's the way this
technique works.
Very lightly.
I made uh Becky kind of a blonde here.
So, I'm gonna make uh Bonnie more of a
red head
using some raw sienna.
These are exactly the same print. So,
paint them slightly different to uh give
them a little bit of variety.
I'll do a final highlight pass with a
very light unbleached titanium.
And last but not least, I'll take a
double zero brush
for this apple barrel pavement
and touch up the horns and the hooves.
Maybe the eyeballs, too.
Now we can put these guys in their new
home
where the buffalo roam. We'll put Big
Billy.
like that.
And I'll put Blondie,
Becky. Got to remember their names over
here.
I'll put Bonnie face in this way.
Now, for an extra bit of realism,
we need some buffalo chips.
And kids, if you don't know what buffalo
chips are, you can you can go Google it.
I think uh cleaning a pen this small
would probably be a full-time job.
What these are
is actually
they're just pieces of uh broken pieces
of sculpta mold out of my old tray here
that I used for another project. little
leftover chunks and take those, break a
piece off, and stain them with some
watercolors.
Kind of a nice brownish gray.
And uh voila,
you got yourself some buffalo chips.
Now, if I didn't put them in here,
somebody would ask, "Hey, where are the
buffalo chips?" So, you know, I got I
have to I have to put them in. All
right. Pretty happy with the way that
turned out. Think I want to tackle the
tepee village next.
Well, I've gone ahead and dirted in the
area for the tepee village. Same exact
method that I used for the buffalo pen.
And I've got these wonderful
tepeees
that uh Gary built. And uh you know,
they're basically just black
construction paper, some sticks, and
acrylic paint. But he did such a
fantastic job. When I was originally
thinking about Thunderbird, I thought
maybe, oh, they'll have some like tacky
plywood teepeees or something like that.
But, uh, Gary came up with these, and
they look so great that we just got to
use them. But before I glue these down
into place, I want to build a little
fire ring right here. So, let's do that.
Now, I want the fire to have a little
bit of animation,
basically a lighting effect. So, I've
got a uh 5 mm flickering amber LED.
So, first thing I need to do with this
is solder on a a resistor onto the
positive lead. Got some 510 ohm
resistors, which should work just fine.
Then, we'll wire it up and uh get it
installed in there. Now, I like
everything to not move around when I'm
using a hot soldering iron, so I tend to
tape everything down.
A little bit of no clean flux on there
and a nice hot soldering iron. And I've
got some 6040
uh rosin core lead solder.
Just takes a second. You don't want to
leave the soldering iron on there too
long because you can actually burn out
the LED.
Now, I've got some 28 gauge wire here. I
like to use red for the positive hookup
and black for the negative. Try to keep
that consistent.
The red onto the other end of that
resistor.
Black onto the other lead of the LED.
Just like that. Now we'll get some heat
shrink tubing on here.
Now I'm using a 9V DC wallpart type uh
transformer for the power of the lights
and the other animation on the layout.
So I want to test this now with a 9volt
battery. Make sure it works before we
install it. There it is.
Now, I've already drilled a hole down
through the layers of foam,
and I've taped the ends of the wire to
this bamboo skewer,
and I should be able to poke it right
down through here without too much
difficulty.
There we go. Wrap the uh top end of
these wires here
with some black gaff tape. That's just
to bulk it out
so I'll get a nice press fit in the hole
here. Just want the top of it sticking
out like that. Yep.
Now I can start building
the actual fire ring.
And I've got some real rock here. This
is a local sandstone.
Just gluing each rock in place with a
little bit of Een's tacky glue.
It's important to remember that uh this
isn't a real Indian camp. This is a
white man's interpretation
of an Indian camp. So, it's going to
look more Hollywood than authentic.
And now for the logs for the fire.
Going to use some sage sticks.
Cut these all about
two foot lengths or so.
Now I'll arrange some of these into a
little tepee shape
just like my dad taught me to make.
The idea here is to hide the LED. So all
you'll see is the light coming through
and not the bulb itself.
It's probably pretty good.
The rest of these logs we'll put over
here on the side like
going to be put on the fire later.
I'm going to do a little bit more
detailing on the fire, but I want to let
all of that dry first. So, I'm going to
move on to installing the actual
tepiece.
Now, I think I can go ahead and glue
these down.
Without any further ado,
this guy goes right here. Let's see.
These tepee are also uh smaller than
scale. They I well not smaller than
scale, but they're smaller than real
full-size planes Indians tepee would be.
Those things are can be huge. Uh these
are more like child size,
which is appropriate, I guess.
There want them
equidistant from each other.
All right.
Right there.
I want to use some more of this red rock
to
delineate the edge of the pathway here.
Keep the tourists from wandering off
into the wash
because, you know, you give them a
chance and they will.
Now, this is a totem pole that um Bob
Kerner made for the layout.
It's handcarved. I asked him to make
some. He's going to make me a couple
more, he says. And I'm going to hold him
to that because he did such a great job
on this one.
And once again, um this is
culturally and geographically incorrect
for for this part of the world. Um, the
Native Americans in Arizona didn't carve
totem poles. This was a This is an
Alaskan thing, a Pacific Northwest
thing, uh, those tribes up there.
But it is 100% authentic and correct for
a roadside attraction like this from
this era. They didn't know any better.
So this, you know, they would throw a
totem pole uh next to some Plains
Indians tepee's on Navajo land.
You know, I hope my native friends will
understand and forgive me.
Back on the fire pit.
I'm just painting the tops
of a bunch of these sticks with some
black acrylic paint so it'll look like
they're charred.
And finally, just take some black chalk
and add it to the inside edges
of the stones to represent
soot.
Okay,
let's uh plug it in. See how it looks.
All right. Well, I've got that hooked up
to the uh 9volt power bus.
And uh looks just the way I wanted it to
look.
Awesome.
Well, there's just one more little
project I want to tackle this week now
that I've got the buffalo pen and the
tepee village pretty much done. This uh
piece of cardboard stands out like a
sore thumb. So, I want to build this
little pedestrian bridge next. This is a
pretty short span on this bridge. What
is it? 13 ft. And it's just for
pedestrians. So, I don't need to do
anything crazy here like, you know,
build a truss.
I think we can just cut some 8 by8s the
length, some stringers,
and then uh tie those together with some
planking and put a handrail on there.
Should make a nice looking bridge. Now,
I've got my chopper set up here u with a
stop so I can cut a bunch of six foot
long decking planks
out of these coffee stir sticks.
This is a really handy tool to have for
this kind of thing. You can pick these
up from MicroArt.
I want this wood to be kind of a silvery
gray.
I'm going to stain it all with my shoe
dye and rubbing alcohol mixture.
I've created a drawing here on some
quarter inch blue line grid paper that I
can use as sort of a quick and dirty
jig.
Going to put some uh double stick tape
on here.
Piece at each end ought to do it.
Then I can lay my
8 by8 stringers in place
just like that.
And then we can uh just glue in the uh
the decking right on top. I'll just
start down this end and we'll work our
way down
lining these up with my drawn lines
here. Then as soon as that glue is dry,
I'll come back with my
nail hole tool, which is just a track
nail in this little pin vise.
Put a
couple of nail holes
in each board on each side right above
that uh that 8 by8 stringer.
Now I can pop this off of here.
move on to the next step. Now, in
something like this, I always like to do
a little bit of additional
staining and weathering with my
watercolors,
burnt sienna and the cobalt blue mixed
together.
Again, that makes a nice silvery gray.
And I'm just adding some variety to the
different boards.
Super easy technique.
Highly recommended. Just uh don't get it
too wet or you'll undo your glue joints.
See how much better that looks? Then
after that's dry,
take a little fine sandpaper.
Go right down the middle
cuz this would be the highest traffic
area.
Show that those are worn down a little
bit.
Now I've got some scale 4x4 and I want
to cut 1, two, three, four, five, six,
seven, eight upright posts for the
handrails.
And again, I've got a little stop set up
and my miter box so they'll all be
uniform length.
Now I need to notch these planks
in each of the spots where one of those
uh
uh handrail posts comes up.
They can be attached directly to the
joist.
Just requires a little whittling.
So we want four notches on each side.
Just like that. Now I have the delicate
operation of
gluing each of these posts into place
as uh
upright and perpendicular as I can.
Then for the actual handrail, I've got
some some 3x4
that right on top
those posts.
I could leave it just like this and call
it good, but um got something else in
mind. Once again, I'm going to take some
of this
number 10 crochet thread
and I'm going to wrap each one of these
joints.
Give it that
kind of Frontier Land Rawhide look.
Cross it over like that. Back around
the bottom.
Glue that off down here.
Just got to remember to try and do it
more or less the same pattern every
time.
And now I can stain all of this rope
with watercolors just like I did on the
Buffalo Corral.
All right. When it's all done, looks
something like that.
Let's get this installed on the layout.
Now, this gets glued in place.
right here.
And I've got a couple little steps here,
one on each side,
and those will transition to the uh from
the bridge to the gravel path when I get
around to adding that.
Bob Kerner also sent me some really nice
3D printed buffalo skulls and I thought
it would look cool if I put a couple of
them up on lodge poles here at the back
of the tepee village. The lodge poles
are made from some bamboo skewers and
the eagle feathers are actually just
painted pieces of paper. And once again,
I, you know, I make no claims to the
native authenticity of this detail, but
uh it definitely fits the theme of
Thunderbird and I think they look pretty
cool back here.
Well, you know, it feels like I got a
lot done this week and I want to thank
you all so much for joining me today.
I'll be back next week for sure with
another video. Until then, you can also
follow for free over on Patreon. That's
patreon.com/thundera
or on Instagram at thunder.ma. And I
hope you will check out the resources
available on the Thunder Mesa Studio
website at thunder mesa.studio.
As always, my heartfelt gratitude to our
Patreon members who help to make these
projects and these videos possible.
Until next time, keep moving forward
everybody. Adios for now.