Hey YouTube: NOBODY wants non-skippable ads. Nobody. Stop it.
Howdy folks! Dave here at Thunder Mesa Studio on a Workbench Wednesday. I hope
you are having a great day wherever you are and whenever you happen to be
watching this. Today I want to do a little follow-up to a video I did about
a year ago where I talked about my 10 essential tools for model making. It's
not that that list has changed at all. In fact, I think it's still a really good
starting point for anyone jumping into the world of model making and I'll put a
link to that video if you'd like to check it out. But today I want to dig a
little deeper and expand upon that original list with 10 more model making
tools which I also find to be pretty indispensable. A lot of these are
longtime favorites of mine while some were suggested by you in the comments to
the original video. Again, this isn't an exhaustive list and the tools aren't
ranked in any particular order, but since YouTube loves a top 10 list, here
we are. Once again, we are talking about small hand tools here of the kind that
model makers tend to use the most. A list of essential power tools would be a good
topic for another video. As before, most of these tools are readily available
online or from your local hobby retailer if you happen to have one of those and I
will put links to all the ones I can find in the video description down below.
But before we dive into the new list, let's go back and review what was on the
original list of 10 essential model making tools so you'll know where we're
starting from. Number 10, scale rulers. Number 9, flush cut nippers. Number 8,
needle nose pliers. Number 7, small clamps. Number 6, scissors.
Number 5, Swiss files. Number 4, micro drill bits and a pin vice. Number 3,
tweezers. Number 2, razor saw and a small miter box. And number 1, a good quality
hobby knife. Naturally, I went into a lot more detail in the original video on all
of those tools and why you need them, but now with that out of the way, let's take
a look at 10 more essential model making tools. As you expand your skills
and your toolkit, you might find it handy to have these additional items on your
workbench. Number 10, this is a very, very handy tool. In fact, it's really several
tools in one. A lot of you will be familiar with these. This is an NMRA,
National Model Government Association, standards gauge. This particular gauge is
for HO scale, but it also works well for ON30 since ON30 and HO are the same gauge.
You can measure several different things with this, you know, to NMRA standards,
which are pretty much industry standards. For example, you've got a couple of
little slots right here, a couple of divots. Those are for your wheels. Those
are going to tell you whether or not your wheels are in gauge. Down here on
the bottom, you've got a couple of little points sticking out. Those are for your
track. That's to tell you whether or not your track is in proper gauge. On the
opposite side, on the top, you've got a couple of more little points sticking
out. This is for flange weight depth. Say you're hand laying turnouts or you're
ballasting track or you're laying track in a street scene or something like that,
you want to make sure that you have proper clearance for the flange weights of
your wheels, and that's what these are for. This has a whole bunch of different
measurements, different uses on it, and they come with complete instructions.
These things are available directly from the National Model Railroad Association.
Even if you're not a member, you can pick one up. And, you know, I use this all the
time with laying track, even, you know, flex track like this. A lot of times we
assume manufactured track is going to be perfectly in gauge, and that's not
always the case. Sometimes you have to make corrections, and this little gauge
right here is going to be very, very helpful to you in doing that. Got to have
one of these. Number nine is a set of jeweler's screwdrivers. This is one that
a lot of people recommended in the first video. You left out screwdrivers, Dave.
Well, I know. There was only room for ten tools, so this one kind of got pushed off
the bottom. Sometimes it's hard to decide what goes on the list and what comes off,
but this one is definitely essential. This set I've had for, gosh, probably 20
years or more. It's made by General. It's probably still available. I'm missing one
of the screw bits there. I think it's the, yeah, looks like the smaller Phillips. So
you've got like three flathead and two Phillips, and they just screw into here
just like they would into a pin vise. And if you're going to be disassembling and
assembling locomotives and rolling stock, things like that, lots of tiny little
screws to deal with, this is something that you absolutely have to have. Number
eight is glue bottle tips. As you can see, I buy these in bulk. I pick them up on
Amazon. They're not at all expensive. And what these are are soft plastic tips
that fit on the top of a bottle of CA, cyanoacrylate. They allow you a precise
application of just one or two drops of glue at a time. Well, of course, depending
on how hard you squeeze. But the thing I really like about them is that they're
self-sealing. Because what happens is, when you're done using it, the glue is
actually going to dry up here in the tip of the bottle. And the next time you go
to use it, you squeeze, no glue is going to come out. Well, that's very easy to
remedy. You take your hobby knife, you cut off that tip, and you're ready to go
again. So they get a little bit shorter and shorter and shorter over time as you
use them. So they are a consumable. You're going to go through a lot of them.
But, you know, one of these tips lasts me, gosh, a month or more, depending on how
much bottling I'm doing. So definitely a good investment. Highly recommended. And,
by the way, one of the most asked about items in my videos. Asked about tools. A
lot of people want to know where I get these. And now you know. Number seven is
something that'll definitely be recognized by the machinists out there.
These are called 1-2-3 blocks. And these are basically precision machined chunks
of metal. They're called 1-2-3 blocks because they're an inch tall, 2 inches wide,
and 3 inches long. You can get them with or without holes. I prefer the ones with
holes because they're not quite as heavy. And you can stick things in them if you
need to. You know, this is handy for holding things while you're painting them.
I know, machinists out there, that's not what the holes are actually for. But keep
in mind that a pinch, every tool is a hammer. The tool you need is the one that
works for the job. And these work great for model making. I use them often to, you
know, keep walls square on structures and things like that. They make great weights
for holding things down while the glue is drying. Now 1-2-3 blocks can be
expensive. And generally, the more precise they are, the more precision milled they
are, the more expensive they are. Usually, I always tell people to buy the best
quality tools that they can afford. But in the case of 1-2-3 blocks, if you're
just using them for modeling, for model building and not, you know, machine shop
work, I recommend buying the cheapest ones you can find. They don't have to be
accurate within a few thousandths of an inch for the work we're doing with model
building. So, use yourself a cheap pair. They'll last you forever. And, you know, I
wouldn't consider not having a pair of these on my workbench now that I've been
using them for a few years. Great thing to have. Number six on our list is a machinist
square. This is something that pairs nicely with the 1-2-3 blocks I was just
talking about. You know, and as the name implies, this is for checking the square
of things, for making sure that you've got your right angles at a right angle.
This is a small one. It's about a five inch square. You probably don't need
anything much bigger than that. Not much else to say about this except for getting
kind of rusty and probably need to clean that up. Get it all shiny again. Great
tool to have around. Highly recommended. Machinist square. Number five on the list
is a pair of locking tweezers. Also sometimes called forceps. You can see it has a
little locking mechanism down here. So you can lock them at higher and higher levels of
tension. I talked about tweezers in the original 10 Essential Tools video. These
are a little bit different because these are tweezers and a clamp all in
one. Whereas, you know, with regular tweezers you'd have to hold that in
place. With these you can, you know, clamp things and hold things without having to
have your hands involved. So it's almost like having a third hand in some cases.
Very handy tool to have. Highly recommended. As always, get a good pair.
Don't get cheap ones. There's some out there that are made of pot metal where
this piece will break pretty quick. These seem to be a pretty good pair and have
served me well so far. Number four. Dress pins. Now this one is kind of, it's both a
tool and it can be a bit of modeling material at the same time. I use pins for
a lot of different things. This can be the finial on the roof of a water tank
or something like that. But what I use them for the most is to hold things in
place on a template like this or a jig where I'm gluing up pieces of lumber.
They act almost like a clamp. They can hold things in place on top of the
drawing. If you put it on a foam core like this. Very, very handy little thing to have.
A very inexpensive tool. You can pick up, you know, a box of these down at the
drugstore for 98 cents or something like that. So definitely recommend it.
I keep mine in a chunk of foam like this so they're always handy.
Number three is, well this is the only homemade tool on the list. I guess we'll
call this a painting clamp. And I made this from a clothespin and a length of
quarter-inch stock. Just glued them together. Made it out of necessity one day
because I needed a way to hold something and paint it without getting paint all
over my hands. Great for rattle canning and airbrushing or whatever. Really easy
to make. Highly recommended. Incredibly useful. Homemade painting clamp. Oh and if
you're looking for the specs on this to make one yourself, the handle is about
12 inches long. And I glued it on right about there. Easy.
And here is number two on our list. I know it looks like there's nothing there but
the truth is you've been looking at it this entire time. I'm talking about this
cutting mat. These are incredibly handy. I've been building models on these for
years and highly recommend them. These are what's known as a self-healing
cutting mats. They come from different manufacturers. This one is made by
Fiskars. You can also get them from Xacto. I like the Fiskars ones because they're
larger. This one is 24 by 18 inches and more importantly they're double-sided. So
when you wear out one side, you know even though they're quote-unquote self-healing,
you will wear them out. When you wear out one side you can flip it over and use
the other side, thus doubling the lifespan. I'll put a link to where you
can get these down below. I pick them up on Amazon. I've got two of them on my
workbench right now. One is a little bit newer than the other. But, man, you
couldn't get through a day of model making without one of these. Very, very
useful. By the way, this is one that was a lot of people commented on in the
first video and said, hey you forgot to talk about the cutting mat. Well, here it
is. Number two on the list, the cutting mat. Now before we get to number one, I
should mention that it wasn't always that easy to decide, you know, what was
essential and what wasn't, what should be on the list and what should be left off.
There's a lot of, you know, great tools out there. And with that in mind, here's
one that I think really deserves honorable mention. And that is the trusty
utility knife. Now just about everybody's house has one of these in the junk drawer
somewhere or in their family toolbox. You can pick one up at any hardware store.
This one has a lot of sentimental value because it belonged to my dad and I've
been using it for years and years and years. In fact, I don't think there's a
single project that I haven't used this on. They're great for, you know, cutting
stuff that's a little bit too big for your hobby knife. You know, thicker
materials or long sheet materials and things like that. So honorable mention
today goes to the venerable utility knife. And that brings us to the number one tool on
this list. And to be honest, it's kind of a no-brainer. In fact, I'm holding it in
my hand right now. It is a pencil. Yeah, you know, if you're going to be measuring,
marking, cutting, and filing, you need something to mark with. Now my preferred
pencil is a Dixon Ticonderoga number two. But you know, your mileage may vary. You
might like a harder lead or a softer lead. You might even prefer a pen. The
point is you need some sort of writing implement to mark with if you're going
to make things. And so number one on our list is the pencil. And now before we
wrap things up, just a quick review of the ten more essential modeling tools
that are on this list today. Started off with an NMRA standards gauge. This one's
HO scale, but I should let you know you can also pick these up in O scale, S scale,
N scale, whatever model railroading scale you happen to be using. Then we have a
set of jewelers with screwdrivers. These plastic tips for your cyanoacrylate
bottles or CA bottles. Very handy thing. A pair of 1-2-3 blocks, machinist square,
some locking tweezers, dress pins, my homemade painting clamp. Very handy. I
think I might need to make a new one of these. This one's getting kind of grody.
Fortunately they're not very hard to make. What else? Oh, the cutting mat
itself, the pencil, and of course Honorable will mention utility knife. And there you
have it, my friends. Ten more essential model making tools, at least tools that
are essential to me, to my process. These are things I reach for just about every
day during builds and projects. But you know, you might have your own favorites
and I hope you will put them in the comments down below and we can continue
the conversation there. And that's gonna wrap it up for this Workbench Wednesday.
Thank you all so much for watching today. If you enjoyed the video, I hope you'll
like, subscribe, share, and hit that notification bell so YouTube will let
you know when the next video is coming from Thunder Mesa Studio. You can also
follow over on Instagram at Thunder.Mesa and see the resources available on
the Thunder Mesa Studio website at ThunderMesa.Studio. As always, a huge
shout out and thank you to our Patreon members who helped to make these videos
possible. Until next time, keep moving forward my friends. Adios for now.