DIY Captain America Magnetic Shield (Out of Cardboard).

Shielded Dynasty Network
2 followers
1 Video View·Dec 8, 2025
These are materials you need to make this shield:
-Cardboard
-Wood glue (optional)
-Hot glue (optional)
-Hard foam
-Masking tape
-Gray wall paint (gray primary paint is recommended especially for metallic color)
-Spray paint (red. blue, silver)
Hi guys welcome to this video so at previous video we already made this captain america shield
out of cardboard and in this video i'm gonna show you how to make the new looking shield
um the falcon version but now it has magnetic strap look pretty cool isn't it this is make it cheap
to make the shield i did the same method as the first shield um you can click this card if you
want to see the first build video it's pretty much the same so i make the triangle on the cardboard
i cut the cardboard i bend the triangle i glue the triangles and i glue the shield with wood glue
now we just need to make the foam part before we get to the shield making let's make the magnetic
strap first i use magnet from old speaker so i need to cut the speaker frame to get the magnet
it's a little bit tricky because you're gonna need an angle grinder but you can ask someone
to help you or just buy a magnet but it's better to use old stuff like this because it's cheap
now we need something to hold the magnets i put two magnets on a holder and i use bamboo
as the magnet holder i'm just thinking that the shape of the bamboo looks great on to stick on my
so
okay so this magnet strap is pretty cool it's pretty well on metal even it's just made of
old speaker magnet and now it's difficult to take it off
okay we are done with the magnet now let's get into the shield i need to put these
thin metals on the back of the cardboard shield where the magnets will stick on
now for the shield um i still use foam on this project because it's cheap and easier to build
and we're just gonna need to make a circle as big as the cardboard shield
to make the rings i use this clever trick to make a perfect circle so i bind a pin and a pen
on both string end and place the pin in the center of the circle and drag the pen along the way
and this is it a nice looking circle you can use this method to make all the rings of the shield
and each ring has 2.5 inches wide i forgot to tell you that the diameter of the shield is about 25
inches and for the second ring um we need to split it up just like this
i need to burn every side of the second ring to make the gap between it noticeable
when the three rings are done now we can make the star
um you can print a pentagon to guide you to make a perfect star like this um it just it just easier
for me now on this new shield the star has pattern like this i need to make a template
to make the shape perfect and i'm going to use this can now we have drew the lines
we can cut it but not too deep we don't need to cut it out
okay now we can burn it a little bit just like the second ring to make gaps
all right um we are pretty much done with the rings now we can glue the foam on the cardboard
but before we do it we need to make holes like this on the second ring okay now let's glue the
foam i still use wood glue on this part wood glue is just perfect let's start from the start
because wood glue takes time to dry i need to use hot glue as an assist
when all the foam glued um we need to let it rest more or less 12 hours until the wood glue hardens
and dry okay the shield is ready and it is time for coloring for the primary color i use gray
wall paint because i'm going to color the shield with metallic paint so the color will be a little
bit darker than my first build shield i'm going to color the silver part first so we need to cover
the other parts with masking tape just spray the paint thinly at first for a good result
uh the blue paint wasn't dry perfectly and i already applied the masking tape and when i
take off the masking tape the paint also peeled off like that so i guess i'm going to paint the
blue part at the last so i'm going to paint the red ring first this one and this one so but i'm
going to do it tomorrow because it's already dark so uh yeah glory morning guys let's finish this
shield
did a bit of adjustment on this magnet strap so i added this handle um if i don't put this handle
there uh this magnet become so shaky on my arm because these magnets are pretty heavy but now
i can put my hand right there and i can control uh the magnet so um it's better now because i use
a gray primary color this shield looks more darker than this one and if you see on the silver part on
the star and the second rings there are some scratches because of the masking tape um it's
not supposed to be like that um it bothers me at first but now i think it looks pretty nice and
the magnet it's stuck pretty strong on metal actually this project was inspired from the
hacksmith if you watched his video about five years ago i guess but he used an electromagnetic
which is expensive i just use old material like this um these magnets i took it from
uh my old speaker but it still works pretty good look see even if you throw them the shield
you can catch it easily and if you want to take the shield off you have to push this side like
like that but if you push it this way you can't do that because look the magnet still stuck you
have to lose the energy of the magnet by pushing this side all right guys i hope you like this
project if you have any project idea please let me know in the comment down below so please leave
a like if you do like this video and subscribe to see my next project in the future and i will
see you on the next episode of make it cheap as always stay creative
