Optimal Threadworks: Custom PC friendly, 1/6 scale inspired, Tarahumara redux

Ballistic Lab
1 follower
Dec 7, 2025
Optimal Threadworks: Custom PC friendly, 1/6 scale inspired, Tarahumara redux
All right, I guess it's I got a product that I'm pretty excited for you guys may not care
So if nothing else, we'll just look at it as like an intro to a gear guy. All right, so
Way back when it's probably five years ago. Now. I saw a picture of one sixth scale
action figure that was wearing like a
First beer strand hog or something and then he had this goofy back panel set up. That was Tara Humara
With a beaver tail
Which if you've had a Tara Humara from hill people gear, they don't play well
With plate carriers at all. They ride over them fine
But this was direct mount which you can't really do with that and they're much bigger than a plate bag
so this was a
Product that I asked a guy to make based off of a not real product
That was a copy of a real product in an unlikely setting. I guess
I'll try to find the picture. I'll try to throw it in after this intro
If not, I apologize. I don't know how to search for it because it's an action figure. All right
So optimal thread works made this for me. It's been a long time coming
He's he's got
Bigger and better things on his plate with what he normally does. I sent him a Tara Humara
I said, hey, can you scale this down to fit a plate bag?
And this is what I got back
So I did ask for some small tweaks the Tara Humara has in my opinion too small of water bottle pockets on it
So I asked for them to fit Nalgene bottles without dipping into the internal capacity
And they do very well. So they fit Nalgene bottles just fine. And then the beaver tail I think
Scaled differently between the 1 6th scale, which is just kind of let's make it aesthetically pleasing
It's what realistically fits but he did give me a beaver tail
It is reversible
and removable
So the inside here has molly
But we'll get this thrown down on the table and take a much closer. Look at it
All right. So if I was a smart man, I would have a Terry Humara on the table to show you the scale difference
But I'm not and mine is really buried right now. So I'm not gonna pull it out. All right
So again optimal thread works made this for me
And I think he did a very good job
based on
The minimal guidance that I gave him and I just kind of set him free. All right, so I
Made it in multi-game black for me, which is awesome. Cuz multi-game black is super cool
So looking at this thing, you can see it's got a beaver tail on it. All right, it uses
These metal buckles here to fasten into this lower
Molly here so I could completely remove it if I want or I can flip it around and reverse it
Looking up top the buckles obviously I'd have to rethread to reverse but that's no big deal
We're just having kind of goofy backwards there
Got a little bit of velcro up top
And then that beaver tail is a full four columns of molly all the way down
So if I want molly, I got it if I don't I don't have to have it
right, and then with that kind of out of the way, you can definitely see more of the
The Tarahumara footprint here
So it's got the the center zip the two water bottle pockets and then kind of that unique shape to it
So it's done a very nice job on the zipper. It's got the little
Pocket for it up there. Make it a little bit more water-resistant
zip that open and
We've got some some loop velcro in there. It is a very small pack. I get it
You could say that this is not overly useful and you probably wouldn't be super wrong
Don't don't hold that against him. Like I asked for this in this scale and and he produced right?
So I just found it a super cool looking setup and I wanted to give it a shot, right?
So centers up with the the loop velcro in there not the most
Ideal setup for accessing things, but it will store bags of things very well
So if I wanted to set it up for like medical or something like that, I could have
Tearaway bags in there and that would work out very well
All right, and that is the only only thing going on internal there is the the loop velcro
If I was doing hydration with this thing
I'd probably mount it on the Molly and then just tighten the thing up and have the hose coming off of that
Which would be totally fine
Like I said, it'll fit Nalgene bottles in the bottle pockets just fine. There's stretch pockets
So you can see right now because I don't have anything in there
It's dipping into the internal storage a little bit
But it'll it'll expand out just fine. If I had that full and that'll help give some some extra
retention to the bottle as well
Look at the back side of this thing very straightforward just Molly
I figured it was small enough that I I don't need a zipper or anything crazy like that
I really just wanted to get it. All right, this is not
Functionality driven or anything like that. I saw a cool thing and did my best to make it real
All right. I've got these tabs up top here so we could put a compression strap on it and run it external as needed
I don't I don't foresee that being a strong need but the possibility exists and the capability is as well
We've got the two kind of bottom Molly here so I could lash things on here if I wanted
Potentially three three rows of bottom Molly there
So I could tie off, you know wet weather layer or something like that. I think I might have told him I
Had a stuff sack that I wanted to be able to fit there
I can't remember and I didn't go back through chat and check that
But that that ability exists right you can daisy-chain things to the bottom just fine
The top you can kind of see
From the stitching here. It's it's a tapered bag
So it's a little bit bigger on the bottom than it is on top in terms of depth. You've got these nice
Side release buckle mounts or surface mount side release buckles to keep everything streamlined
So if I pulled off the beaver tail, I could use those for for hanging other things if needed
If I don't want anything there and I pull off the beaver tail, they're really not in the way
If I had if I had put more thought into this and given him more direction
Potentially I would have worked in some pass-throughs for antennas or bladder cords or something like that bladder tubes
But really I didn't give him I didn't give him much in the way of direction
All right, I said scale down Terry Mara and he did that he knocked out of the park
This thing's gonna fit plate bag very cleanly
Something like a 6094
You could you could make use of the full six
Six columns that he has on the back here with some mouse clips or something like that
If you really wanted to retain it, well
But four wide is kind of the safest bet for full length
Attachments, so that's what he went with and I don't have any complaints there got the soft tuck tabs. So
It'll thread suit through unforgiving Molly if that becomes an issue or anything like that
so there you go, just kind of my
my
desire for this thing and then his
Execution no, no complaints on the execution at all. All the stitching is really well done
If you follow him on Instagram his packs look phenomenal. This is the first thing I've gotten from him
But I didn't have any any doubt that it would be very well done. So there you go optimal thread works
Custom backpack, I don't think he's gonna want to make another one of these but you could ask him
I don't know what he would charge you because I gave him the the template tarahumara to keep so
There you go. That is
Optimal thread works check him out guys. He makes great stuff
