You can easily install metal thread inserts into wood for jigs, knock-down furniture, or repair stripped-out threads in aluminum or cast iron. The right product and tools make it easy!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Threaded inserts are a great way to place durable threads in a variety of materials. Originally designed by E-Z Lok® to repair stripped-out threads in aluminum and cast iron objects, they have expanded their product line to include threaded inserts that provide threads for common sizes of fasteners. There are inserts available for metal, wood products (such as MDF and plywood), and wood itself.
DirtFarmerJay uses them regularly in the shop for creating jigs as well as for “knock-down” (“KD”) furniture. One of his favorite inserts is the knife thread brass ¼” - 20. ¼” thread, 20 threads per inch, are a very common size both for fasteners and jig hardware.
Another benefit in using this type of system is If the recipient of the project or gift isn’t that savvy about woodworking or assembly, the fasteners and inserts are very intuitive to use.
In an earlier episode, DirtFarmerJay showed how to make a simple jig using wood, a bolt, spring, and washers to create an installation tool for installing the inserts, as well as a way to use a drill press (if you have one!) to do the install. You can check that out here: https://youtu.be/iSana9VhXXU
Our friends at E-Z Lok® reached out to us after our first episode and provided us both with more insights, product sheets, inserts, and installation kits. No, we aren’t being compensated for this review. But we don’t hesitate to get the word out when we do find a great product line!
We especially like the kits because both the E-Z Lok® proprietary installation tool AND the precisely-sized drill bit are provided. When drilling the hole for the inserts, “close-enough” isn’t good enough. You can’t just round up or down to the next size you have on hand. Too small, and the insert can’t be installed. Too large, and the insert will go in, but it will easily back out, or not have enough thread penetration into the surrounding material to make a secure install.
For the inserts and/or kits for wood, the drill bit provided is a high-quality brad point bit. These types are superior for use with wood over the typical metal drilling bit found in most toolboxes and shops. Brad-point bits cut cleaner holes, don’t wander off the starting point, and exit the work very cleanly. It’s our view that anyone doing even a moderate amount of woodworking should get a set of these bits. You can check out our review of these types of bits and also get a nice discount from the manufacturer (located in the USA) -
If you need to repair threads in cast iron or aluminum, the kit comes with a metal drilling bit, and a tap unit to create threads precisely that fit the outside of the new insert.
In addition to the correct bits, E-Z Lok® provides an insertion tool that correctly grips the insert so it can be installed without damage to the insert or the surrounding material.
E-Z Lok® inserts are available in a wide range of sizes and applications (including coil threaded inserts) and can be easily found online. You can check them out at www.ezlok.com.
Now that you know about this great product and its applications, this is another skill that you can JUST DO IT YOURSELF.
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hi, Dirt Farmer Jay here from DirtFarmerJay.com. You know, it's really handy to be able to put
threads into wood, whether you're building something that you want to make adjustable
or it's knockdown furniture, perhaps it's a jigger fixture. It's all in getting the right
hardware and we found a great source and some great accessories. Stay tuned and I'll tell you
all about it. Hey, Dirt Farmer Jay here from DirtFarmerJay.com. We have found some great
threaded inserts from EZ Lock and I'm going to give you more information in the description
below. Always check out the description below because I'll give you more resources than we're
going to take time to do in the episode itself, including website specifications, other
specification sheets and that sort of thing. And we'll also direct you to the manufacturer website.
Now, a couple of disclaimers very quickly. First of all, this is not a paid advertisement from
EZ Lock. It is our pleasure here at DirtFarmerJay.com to always find great products and services
and then pass them on to you, our viewer family. And we think it's a great thing to do that. And
if you've got other things you'd like to share with us that we can get out to the viewer family,
feel free to do that in the comments below. Now, we're going to look at threaded inserts.
In a recent episode, we showed you how to make use of these threaded inserts and this happens
via sanding block where a piece of sandpaper is wrapped around and then detached. But if you look
in there, you can see the threaded insert. And then this knob, threaded knob right here, goes
right in and is screwed in here. Now, recently in this episode called Foolproof Thread Insert
Installation, we just walked you through step-by-step and you can check out that video
right here. But we showed you how to make this jig right here where you can take a threaded insert
and by pushing it down into the wood with a ratchet, a socket, you could drive it down,
and also a way to do it using your drill press. Check that out if you'd like to. But right here,
right now, I want to show you the various types of threaded inserts that are available, whether
it's for thermoplastics or whether you're going to use it in metals such as aluminum or cast iron
where you need to drill out damaged threads and put in a new insert. Also for wood composite
products such as MDF, some of the plywoods, and lastly for wood itself. Now, to drill these in
and to get them in, you need to use the specific size drill bit. If you use too large of the drill
bit, sure the insert will go in, but it doesn't have adequate purchase for the threads to really
cut in and hold in correctly. Or when you're backing out a bolt, the threaded insert will
tend to want to follow out because there's just not enough torsion or torque resistance. So you
got to get the right thread, or excuse me, the right bit. Not only that, if you make the bit
too small, then the threaded insert, because of the barrel size, the root barrel size,
is too large. It won't go into the hole at all. So you got to use the specific bit.
Let me show you what I mean. As you can see from this product brochure that I have
from EZ Lock right off, you've got metal inserts, wood, and plastic, and that includes coil inserts
that you can put in. Those are that kind right there into metal. But you can check out their
website at EZLock.com. You can see that across the bottom of the screen and or down in the
description below and check them out. Also, let's just look across and see some of the product
offerings that they've got here. First of all, this kit right here is for drilling metal. And
as you can see, it comes with the specific bit, a metal drilling type bit of very specific size,
a tap to thread out the hole here so that these inserts can be driven in and a new set of threads
is in the interior. Plus there's a proprietary driver that they provide to drive these in.
So this is a really nice handy kit. The next three right here are all woodworking kits. So
notice that all three of them are for quarter 20 threading, but the materials are different
and the type is different. And if you look carefully, you can see, for instance, this is
threaded inserts for softwood. This is threaded inserts just for wood. So that could be a harder
wood like maple or cherry or oak or something like that. And this is the same here. The difference
here, this is stainless steel. You can see that in the inserts right there. And this is brass.
Now also these are available in bulk packs. You can buy these in bulk here, but buying the kit
here makes a lot of sense because of the bit right here. Look at the size of the bits on each of
these. They have to be precise. For instance, this one has a drill size of 2364. I bet you don't have
that or it's very unlikely you have that in your drill bit set. And specifically, if you look real
careful here, you can see that is a Brad point bit. So those are very specific for cutting wood,
very clean exit, no wandering, very clean hole that's put in there. So it's even rarer to have
a Brad point bit that is precisely the size that you need. And over there, that was 2364.
This one, let me see, is 2564. And then this one, so 264 is larger. And then this one back over here
is also 2564. So the precise bit is what is provided in the kit. And then you can just
continue to buy these here. Now, in that earlier episode, we showed that you could drive these
types of inserts by using some kind of bolt like this, or even chucking a bolt with some jam nuts
into your drill press and using the drill press handle to exert downward pressure by slowly
threading it into the hole. And it works great. So after seeing our first video showing that system
right there, our friends at EZ Lock reached out to us and said, you may be interested in our
proprietary driver and our kits. And I'm glad that they sent these on to us for us to take a
look at. We're very happy with them. As you can see, this driver has the threads, in this particular
case, it's a quarter 20 that'll fit the inside barrel of the threads, but there is no little
indents or paddles, if you want to call it, that match these grooves across the top. So you can
drive that insert in either way. If you want it to be decorative and not have that slot across the
top, you can certainly use this driver to do that. Well, let's go ahead and demonstrate how well this
works. Okay, so we're going to use, we're going to put in the stainless steel ones right here,
but I wanted to point something out. Each of these kits come with a custom driver.
You can see those right there and there, but one thing I want you to notice is when you look at
these inserts, they are hex shaped and the driver is hex shaped also for that. And so we'll
put that to the side, but over here, those threaded inserts right there also are just straight threaded.
So let's go ahead and we're going to put in this stainless steel set in this piece of cherry. So
the first thing is we have that Brad point bit, and as you can see, that spur keeps it centered.
The second thing that mirrors the wood is these little, you have the center point, excuse me,
the Brad point, then the spurs hit it. And of course the flutes take away the excess, and this
is precisely sized to give the right resistance when you put in this insert. Well, let's go ahead
and take it. We'll check it, put on our safeties, and we've set the bit so that it'll go through
the wood just a little bit. Let's give it a fresh spark. There we go. And we'll just choose a random
place here on this to put the insert in. Here we go. Very nice, very clean. You can see right there,
very little blowout, very clean entry. All right, we've got that. Now it comes time to insert this,
and we'll just go ahead and use the drill press table to do that. And let's go ahead and grab
the insert tool, and I'm going to go ahead and install it with the slots up. So if I wanted to
take it back out of there, I could go ahead and use a screwdriver to do so. We're going to go ahead
and put this right there. And to just drive it, let's go ahead and use a little impact driver.
We're going to set that right there and just slowly rotate it in. Once it gets to that point,
then I can reverse out the bit. And notice that the insert now stays in there beautifully,
and it's very clean. And I could put it in the other way so the slots weren't at the top.
And if this was a fixture nut or a thread or another connector to put together some knockdown
furniture, then of course it would just thread right in there like that, and we're ready to roll.
Pretty slick, huh? So you can see why I'm very enthused about having these kind of devices
and tooling for in the shop. Another thing that if you're going to do any amount of woodworking
is drilling holes precisely and not having blow out the bottom. If you have had that kind of
situation, chances are you're using standard twist bits that are designed to drill metal.
The problem with that is the geometry of the bit puts a lot of pressure as it exits out,
and it also makes it difficult to track exactly the starting mark that you had on the piece of
wood. Check out this episode where we tell you about Brad Point bits with spurs on the side
and a great supplier. We think you enjoy it. Take a look at DirtFarmerJ.com
forge slash shop also for some great merchandise. Until the next time,
this is Dirt Farmer Jay from DirtFarmerJ.com.