Reconsurco: Escape and Evade (Dangler, Fanny Pack, Chest Rig, Satchel)

Ballistic Lab
1 follower
Dec 4, 2025
Reconsurco: Escape and Evade (Dangler, Fanny Pack, Chest Rig, Satchel)
Alright guys, another loner product.
When these were released, I really wanted to need one
so that I could do a review on it,
but I really didn't need it, so I hadn't pulled the trigger.
This is the Recon Circo Escape and Evade,
which came out around the same time
as the LBT Chester Egg Fanny Pack combo deal,
which I also don't have yet,
because $250 is way too much for that.
But eventually I'll have one,
and I'll do a video on that too.
So this is the Escape and Evade,
which is a dangler, fanny pack, Chester Egg,
catch-all, you can sling bag, or satchel,
if you wanna larp as Indiana Jones.
It has some interesting features,
and I'll get it on the table and go through them,
but same gentleman from Canada sent me this,
so huge thank you to him, and let's take a look at it.
They now have a mini one too.
I don't know what the mini one is,
or the difference is exactly.
This is the full size, to my knowledge.
So if it's too large, check out the mini,
and let's see what you think.
Alright, so right off the bat,
as we're looking at this thing,
I wanna thank Recon Circo for sending a real harness
with this thing as an impromptu chest rig.
I don't think that's its main use.
It could be, it could be a replacement
for something like a Hill People Gear Recon Bag,
or something like that,
but I don't think that was the primary intent.
So for the kind of included harness
to be a functional H harness is very nice.
The buckles, as far as I know, all come with it.
Again, this is borrowed, so sometimes folks modify things,
and I don't know about it.
But it has essentially two position mounting
on these surface mount buckles
so that you can tie in your chest rig.
And you can see that is sewn
so that it is a true H harness coming off of there.
There's no routing or anything on here,
but it is kind of an in extremis chest rig.
So can't really fault them for that.
This is more than I would have expected
as I pulled this out of the package.
And then you also have your back strap,
both of which have D-rings on there
so you can adjust length,
D-rings up on the shoulders there.
Maybe not the most ideal spot
for the adjustment to come from,
but you could probably tweak that closer to the buckle
so it's just out of your way.
So very nice functional inch and a half webbing harness
for chest rig usage with all of the applicable buckles.
Then as we're looking at this thing,
there's a handful of things that are unique about this.
Other than that, it's a very straightforward product.
So it's not very readily apparent.
If you go on their website, you can see it much more.
That front pocket kind of has a sort of a bellow to it.
It's got more volume up at the top than at the bottom.
So you have kind of an interesting profile there.
You have a large Velcro face on there
and then a double zipper on this front pocket.
There's no Velcro inside there,
but this is more kind of your generic item storage
portion of the product.
As you look in the main pocket here,
it is loop backed on the body side of the product.
And then you have kind of this map case here,
which as you're wearing this thing,
this is naturally going to lean away from you
a little bit as you have it open.
So depending on how much crap you have in the way,
you might be able to work on your map right there
in or reference cards or whatever, you know,
you could read it.
I don't know if you're going to make annotations on it,
but you could use that pouch or that clear vinyl there
as you're wearing it.
And then as we look at the backside,
you've got all of your mounting points for your harness.
So, you know, if you've got a sling bag,
you just use the top.
If you're using a fanny pack, you've got the sides.
If you're doing the whole kit and caboodle chest rig,
you've got straps coming off everywhere.
And then you've got this back pocket here,
which has a couple of things going on in it.
So you've got this VS17 panel here,
which is a little gimmicky kind of,
but it's got Velcro on both ends, hook and loop.
So you can, I think in theory,
you can wrap this all the way around the thing
and secure it in place so that it's a signal panel
that's not going to go anywhere on you.
This flap allows it to work as a dangler.
It is not reversible.
So you do need to have a plate pocket
that will engage with this correctly,
which will be hook on the outermost portion
of the plate bag and loop on the innermost portion.
One of these days I'll remember
what the industry standard-ish thing is,
but I don't right now and I apologize.
And then in this pocket,
you can see you've got loop or hook on the body side
and then loop away from the body to engage with inserts.
If you're not using it as a dangler,
it does not change the orientation of the Velcro at all.
So if you have any inserts,
you don't need to be worried that it's going to change
depending on how you have it set up.
And with it tucked away,
you have much more loop there for an insert to engage with.
So you could very reliably get two M4 mags in there,
potentially a pistol and a reload, and then secure it up.
You don't have great continuity on the backside
with just this one inch of hook,
but plenty of inserts out there
have made do with much worse continuity.
You've got, like I said, the whole loop field there.
So the bulk of your retention should come
from the outer face of your insert.
But you can have that on there.
Your two M4 mags will clear your buckles
so that won't get in the way of reload or anything.
And then you've got a little bit of GP space
on the outer face of your kind of impromptu chest rig.
The straps, if you're not sure
how you want to use this thing,
the straps did fit very nicely in this front pocket
and did not impede any storage in the larger area.
So you could definitely keep those kind of tucked away
for the event that you need them.
So I just looked it up.
It's $135 on their website.
I don't remember what's in stock right now.
I clicked on multi-cam.
I know that's not in stock.
But kind of an interesting product there.
And it's at a much more realistic price point
than the LBT version.
They are not the same product.
Similar concept, but different configurations.
So there you have it.
The Recon Circo Escape and Evade Pouch.
