Making grommets with a 3D pen

Skillful Hands
120 followers
1 Video View·Nov 13, 2025
Hello, I'm Sanago, a 3D pen artisan.
Today, I'm going to make
Gromit from Wallace and Gromit.
As you all know, Wallace and Gromit
is a famous stop-motion animation series in the UK.
As you can see from the title,
Wallace and Gromit are the main characters.
Gromit is a genius dog that follows Wallace.
To make a Gromit figure,
I'm going to make a frame.
I'm going to draw a thick layer so that it doesn't look like a mess.
Gromit is a dog,
but it looks like a human,
so I'm going to imagine the side of a 30-year-old man
and make a frame for the side.
Nick Park, the father of Wallace and Gromit,
was an electrician.
When his father said,
I'm going to put Gromit on this,
the word was cute and memorable,
so he used it as a dog's name.
Maybe it's because it's a name from an electrical engineering term,
Gromit seems to be good at machines.
In the cartoon,
you can see him reading an electrical engineering book for a dog.
To make the frame three-dimensional,
make a middle frame
and make it round with your fingers.
If your fingers don't fit,
make a frame with small tweezers.
It takes a little bit of spatial awareness.
The same goes for the body.
Add a round frame to the basic frame
to make a three-dimensional frame.
Sometimes, in order to follow what I make,
there are people who ask for a drawing.
Except for the front view,
everything is made on the spot,
so there is no three-dimensional drawing.
It's similar to a 3D printer, but it's different.
When a three-dimensional frame is made,
make the frame tighter
and make the frame stronger.
It's like a spider wrapping its prey.
Fill the body in the same way.
Now you can do this with your eyes closed.
I'm going to connect the body and the head.
Gromit reads a lot of books
and has a smart image,
so you can see his turtle neck.
So this figure
I'm going to change the position of the arms and legs
and change it to a sitting posture.
The blanks that appear as you change your posture
make a frame right away.
I'll have to fill in the hole.
Because he's sitting and reading,
his waist is bent
to complete the turtle neck and the disc.
Those of you who have straightened your back,
did you feel hot?
I just straightened my back while editing.
I'm going to make a sofa later,
but for now, the Gromit frame is complete.
When the frame is complete,
what should I do now?
That's right.
You have to make the frame tighter.
When you can't fill the inside because the gap is narrow,
you can temporarily separate the arms and head.
Now you can fill in the inner frame tightly.
Now I'm finally ready to fill in the noodles.
Spin the pen round and round
to fill in the empty space between the frames.
I used to be bored with filling in the noodles,
but I got tired of working on a 3D pen like eating.
But I was still tired of it.
Just like eating doesn't make you lazy,
I guess being tired of working every day
doesn't make you get tired of it.
I made Gromit's cute ears thick and attached them,
and heated them with a lighter
to shape the ears
with anything round you can see around you.
After filling in the noodles,
I should trim the noodles, right?
Use an iron tip to trim all the noodles flat.
For the hollow space for the eyes,
use a sandpaper to trim the noodles
with a round iron tip.
Trim the noodles with an iron tip
according to your preference.
It's been trimmed neatly.
I also trimmed the body with a large area.
I trimmed it.
It takes a few hours to finish trimming,
but it feels really complicated
If you ask me what's the hardest thing to do these days,
it's sanding.
It wasn't like that when I started YouTube,
but these days, my shoulder joints hurt when I sand.
Is it a kind of occupational disease?
Or is it just a different joint durability?
I still have a lot of work to do,
so I'll have to take good care of my health.
I haven't even done half of it yet
so I still have to be healthy.
After a day and a half of sanding,
I have to grind it once more with a finer sandpaper.
If there's a hole while grinding,
trim it with a chisel
and continue to trim it
for a few days until it becomes a smooth surface.
Now that I'm done trimming,
I'm going to put the arms back on.
I'm going to make the head move,
so I'm going to make a round hole
and widen the hole to fit the size of the neck.
I also make a book that Gromit is reading.
I was going to make a book out of paper,
but I thought that would be more difficult,
so I just made it out of a 3D pen.
Gromit is a reading king
who appears in almost every series.
If you look at the books Gromit has read,
it's not John Milton,
it's John Stilton's Shinnago,
Pluto's Gomago,
and in prison,
it's reading Jehovah.
But the author isn't Dostoevsky,
it's Dogstoevsky.
Gromit is a smart dog,
so there are a lot of scenes where he reads books,
but I think it's an element that gives hidden fun
with book selection that fits the situation
and a parody that slightly changes the name.
To make the book more detailed,
I cut it thinly like paper
and trimmed it to make it look natural.
It's not a real book,
but doesn't it look pretty good?
I'm going to make Gromit's eyes separately
and put them in at the end.
First, you have to dig a hole to put it in.
Put the right part in the 3mm hole.
And cover the white filament on the part
and make it round before the filament hardens.
Fill in the small gaps with an iron
and trim it well with sandpaper
to make small pearl-like eyes.
Roughly draw the position of the pupil
and put the head in
and the Gromit figure is complete.
Now, to make Gromit look like he's reading a real book,
I'm going to put a device inside.
Connect a servo motor to the head.
I coded it in advance
so that the motor rotates slowly with Arduino.
Now fill in the open marks and get rid of them.
I made it so that you can turn it on and off by pressing the button.
It looks like it's really alive, right?
I only put motors and Arduino in Gromit's body
and removed the magnet connector
with his butt to take out the power supply and the switch.
Cover the back cover well and finish it.
Now I'm going to make a sofa for Gromit to sit on.
The way to make this filament board
is to spread a large amount of filament at once with an iron,
but please refer to the previous videos.
Make it from where Gromit sits
to express the feeling of the sofa being pressed against Gromit's body.
Then you can make the rest in turn.
In fact, this simple form can be made quickly
You can also trim the flat surface quickly
by using putty.
Then why did I work so hard until now
That's my heart.
There's nothing set.
Attach a sticker to the position of the butt jack
and mark the position where the jack will go into the sofa.
I'm going to install the rest of the devices that need to be operated under the sofa.
This will make it easier to repair later.
I trimmed the legs of the sofa with real walnut pieces.
It looks real, right?
Because it's a real tree.
Drill a small hole to pass the wires inside the sofa legs.
Now, let's color it.
Paint the whole thing with brown that doesn't look much different
and paint the color that matches the animation.
The nose is shiny enough to shine an enamel paint...
Oops, the face is shiny enough to shine.
Paint the sparkling eyes delicately.
Isn't it really cute?
It's not a cigarette.
It's a round brush I made.
After coloring the sofa,
make a stand light next to it.
I used a real tree to make it look like a real tree.
Finish with oil.
It's harder to make a sofa or a light than a figure.
You'll see why this took so long
when you see the finished product.
Lastly, I'm going to make a work stand.
I painted it red to make it look like a carpet in the animation,
and it hurts my eyes.
Draw a pattern with masking tape.
If you're working quietly,
you'll inevitably get in the way.
When it's dry, carefully peel off the masking tape.
It hurts my eyes more when I draw a pattern.
After drawing the detailed patterns with a brush,
I finished it with an airbrush
Take out all the power from the device
and put the figure on the stand.
Lastly, I'm going to make an electronic engineering book
Because I'm a liberal arts major,
I filled the contents of the book with simple formulas
and meaningless graphs,
so don't look too closely.
Now, if you put the book in Gromit's hand,
the book-reading Gromit figure is complete.
Isn't it so cute that it's a reading puppy?
If you press the button hidden on the floor,
the light on the stand turns on
and Gromit starts reading.
I want to read, too,
By the way, what is he reading so hard?
If you look inside the book,
there's a picture of Fethus McGraw.
Well, if Fethus McGraw hadn't gone down the wrong path,
he would have been a great engineer.
Isn't he so cute when he's focused?
It's like watching a scene from an animation.
Because electricity is supplied directly
the figure has no switch, so it's neat.
If you put it on the sofa,
it starts reading right away.
It's like watching my student days.
Try making a book-reading friend
with your favorite character.
Then I'll come back with a more interesting video.
Thank you.
It was Sanago.
