Mastering the Align Tool | Shapr3D Step-by-Step

Creative 3D objects
9 followers
Hello everybody and welcome to this video tutorial
explaining the new align tool in Shapr3D.
We will look at four scenes each showing a different use case scenario
where the new align tool will be very useful to effortless
position objects of various shape complexities.
Great, let's get started with our first exercise scene.
Here we have a hexagon container.
With the lid, rotate it two times and put next to it.
Now let's see how we can use the align command
to bring this lid directly where we want.
I can select the target face,
then from the menu on the left, select align
and zoom out a little bit and select the target face.
And that's it.
As you can see, this align command rotated the lid two times
and positioned it correctly.
Let's do this one more time.
We could also go to transform, select align,
then select the face and the target face.
There we are.
Very good.
So you can see Shapr3D actually the align command
rotates it one time this way, one time this way,
and then it also puts it actually onto the object.
So quite a complex task.
Besides aligning only a face, we can also align edges.
To do this, I can select the edge I would like.
Select align and then select the target edge.
Now I could go ahead and, for example, rotate this
and see how the hinge could work.
And that is how easy the align command works in Shapr3D.
Here we have all the parts for a side stand.
And I will show you how we can use the align command
to put this into an assembly.
We'll start with the legs.
The interesting twist I'm throwing into the scene is
some edges are rounded and some edges are not.
And that possesses a little tricky aspect to work around.
And I will show you how easily we actually can do this.
I would like this face to be aligned under the bottom part there.
So I will select this face, go to align, and then select the face there.
And you see it is centered.
Well, I could move this over,
but I don't really know how much I have to move.
So this is not really ideal.
However, I have, instead of a face, I have an edge.
And I can select the edge, go to align, and select this edge.
Very good.
So the edges are aligned.
Now we can rotate this.
You see how we have a co-planar face.
The rotation arrow from green switches to violet.
Basically, this tells us this is perfectly aligned.
The top face of my leg and the bottom face of this tabletop are parallel.
Very good.
Now, when we look from the side, there we can see there is a tiny overhang.
This is not really a big problem.
This is a one millimeter fillet.
All this means we select the whole object and move it over by one millimeter.
That's it.
Very easy.
Now let's take a look at the other element.
I will select this edge.
I would like to align it to the edge there.
And you see this edge has a midpoint.
So with my pencil, I can drag from the midpoint.
And then you see various snapping points there.
Very good.
Also, there it is rotated again.
I don't want to rotate this by hand.
So instead of maybe the edge, we can also select the face.
Let's see what happens when we use the align command.
Very good.
Let's zoom in first.
You see, we have a center point, a top and a bottom point.
So I can actually now say align.
Let me rotate this here.
I can align the lower edge, which also would be the outer edge,
to the bottom part of this face.
And you see, if you pay attention to the align plane, it rotates.
And now I go right to the midpoint of this edge, release my pencil.
There we are.
How awesome is that?
Perfectly positioned, centered.
We don't need to rotate it.
Just move this in by one millimeter.
Very good.
Now, how can we do this frame?
The frame is sharp.
It has no edges and our target surface is rounded.
So, all we can do here is move the frame to an edge on the fillet
and then move it by the amount of the fillet.
Very good.
So, we select this face, go to align, and I will select this bottom part.
You see also there's a start align plane on the left side.
And then I go to my target surface,
go to this end point.
There we are.
Very good.
One millimeter over and I can move this up as much as I would like to.
Very good.
Now, let's see how we can do this.
So, we go align and snap.
Very good.
You can also flip it or rotate it.
You can select the edge and say align to there.
So, that works too.
Very good.
And maybe move it down four millimeters to have a little bit of an offset.
Very nice.
And to position those elements pretty much is the same.
But because we have also here fillets, that makes it a little bit easier.
But because these objects are very far away, I will select them
and move them a little bit closer.
There and there.
Very good.
This one I will even it to closer, a little bit to there, a little bit to there.
Then I zoom in.
And the trick here now is to work kind of like from this view.
So, I can clearly see this and this face.
Because now, select this face, go to align, select this point and align it to there.
Very good.
And we get really close and it's even easier to see.
There.
And that's it.
There's our assembly perfectly aligned.
In this scene, we have a leg, a bracket, a pillow, and a shell.
And I will show you how we can put four legs over each socket.
There's also a particular process or order we should follow now.
And that is basically the bracket goes first onto the socket,
and then the leg will go onto the bracket.
So, let's do this.
We take a look first actually at our three objects.
We can see the some similarities.
The bracket and the socket, they have two rings.
They can be aligned.
Perfect.
And the leg, as well as the bracket, they have two flat areas.
Those can be aligned.
Good.
We will select the correct edge first.
There's actually this edge on the bracket.
Then left select align, select our target edge,
and then we can just rotate it 45 degrees.
Next to the 45 degrees on the left side, you see there's also a flip button.
So, you understand what this one does.
Click done.
Now, the leg, we want to move to the bracket.
So, we have to select this leg face, go to align, and then zoom in a little bit.
You see there are four white corner points.
Even while this is a rectangle that has two rounded edges,
Shapr3D understands where our reference geometry elements.
So, these corner points, we have two midpoints on an edge,
and a central point at the base.
This will be very useful because now all we need to do is select this face.
Very good.
And we see the alignment is 90 degrees off, not a big problem.
We will simply rotate it.
And the moment we get close to 90, you see actually it will snap to it.
How wonderful is this?
So, this is perfectly positioned.
Since we have a vertical axis, all we need to do now is select the bracket and the leg.
And we can then go to rotate around axis, select the axis, turn on copy,
and start rotating in 90 degree steps.
One more time.
And this time, 180.
Let's take a peek from the bottom.
There you see everything perfectly lines up.
And that is how easy it is to align, rather actually,
irregular shapes onto each other with precision.
What do you see here?
I have all the various parts for ErgonicPress.
And I will show you the various ways how we can use the align tool
and the best process to put all these pieces together.
Let's get the easier parts worked on.
I would like this to be aligned into the socket.
We take a look.
We have two circular faces that can be perfectly aligned.
Great.
So, let's select this face.
Go to align.
Then we will select the matching face.
Select it.
And there we are.
Very good.
Easy.
Now, I would like to align this to here.
So, we have two openings, but here only we have one opening.
So, how does this work?
Well, the problem is, if we take a look from the right,
there's even a tiny gap in between.
So, we can't actually align it by saying, well,
this edge align to this edge.
No, we can, but as you will see, it is a little bit off.
We then would have to move this one down.
Now, this is a very cleanly and symmetrically modeled design.
Here you can see the distance is just 0.1 millimeter.
This is not good practice.
How can we do this?
Well, the trick is in my axis here.
So, this joint here, I will select this outer ring, go to align,
and then I will select my edge here, and it will align it.
And this cylinder is modeled to perfectly go from this face to this face.
I will hide this basket right now, because the next thing is pretty cool.
Now, I can align this part of the handle by selecting this cylinder
and say, please align this on this cylinder.
Because the cylinders are straight, so it's not a cone.
As you can see, it centers cylinder on cylinder.
Fantastic.
We can also do the same.
Since we took a look at cylinder by cylinder, position the basket.
We select this, align to there.
Suck.
And it moved it down a little bit too much.
So, just be a little bit careful.
So, you see here in this case, I have to move this up a tick.
But what is interesting, there is also a gap between them.
So, you see it centered actually this perfectly onto it.
So, one question would be is, since we could easily move this to where I need it to be,
is there maybe a better way to align this?
For example, yes, there is.
Namely, we can select this ring and say align onto this ring.
But because now one is a ring and one is not a ring, that doesn't work as you see.
So, don't worry.
That's the reason why.
Then we can switch to the edge because we have a clean ring here too.
There.
Perfect.
You see?
Perfectly lined up.
Now, you see here the stamp is offset.
There, same deal.
Select this.
Go to align.
Select this.
And there is the piece.
Awesome.
Now, we can select this face again.
We can also select this edge.
Align to this edge.
Oh, and in case it does not work, I'll always try
and see if we have an alternative geometry we could use.
There, it works.
Very nice.
Only elements left would be our hinge.
And we can also see, well, my stamp is actually where it should be.
Well, it's not really at the right position.
So, let's move this away.
And here we will do the same trick as before.
So, we'll select my edge here.
Go to align.
Select this.
And just to show you how amazing this align tool works.
On purpose, I rotate this a little bit.
Then we select this.
Go to align.
And select our target.
Very good.
Let's rotate this.
So, there you see, now we need to make sure that, for example,
this is correctly rotated.
This is then where, when having various, how can I say that,
steps will come in very handy and necessary.
So, I will select simply this face and say align to here.
So, now this is centered.
But it's actually vertically not centered.
That's not a big deal because now I can simply go back,
since this is now rotated correctly.
It's just not z-axis correctly positioned.
Then select this.
Go to align.
And select this one.
There we are.
Perfect.
And this is how easily we can then use the align command
to put a nice looking curly press together, only with a few mouse clicks.
