52" Hampton Bay Princeton in Polished Brass | 4-Blade Configuration in the Living Room

TV Electric Fan
2 followers
5 Video Views·Nov 11, 2025
The performance is superior than with the 5 blade configuration, but I think the fan looks bet ter with 5 blades. This is a more modern styled 90s-era design with lots of rounded pieces; the odd number of 5 blades is a better fit in my opinion.
The Hampton Bay Princeton with four blades.
Thus far the two blades configuration seems to have been the most powerful.
So let's see how the four blades works.
Yeah, I'm just noticing now that the back of at least this particular
rubber piece is kind of sticky. So I think that these are supposed to be stuck to the motor,
which would make this much easier to assemble.
So this might be a breakdown with time, not so much a design flaw.
But it is definitely still difficult to align the screwdriver,
even if the rubber pieces are in place.
There it goes.
Hmm, not sure I like this, as I expected.
Because this has a lot of rounded edges on it, it doesn't look quite right with four blades.
It looks better with the five.
It's more, it doesn't look bad this way, but the four blades
adds kind of a rigidity to the appearance.
I think the five blades was better for this one.
But let's see how it performs, because that's another big factor as well.
Another cosmetic element I'm noticing is that there's now gaps in the blade ring,
or the ring the irons used to create there.
So some fans that are four to five blades have two different sets of holes.
One set of holes is into the motor more, and then the second set is out more,
so that depending on which configuration you're using,
that ring is still completed and it looks, you know, cosmetically correct.
This, it doesn't look bad that way, but it looked more complete with the five.
This particular unit just has 20 holes in the same ring,
and you just pick different holes depending on the configuration you want.
So we are going to start on low on the fan, and low on the control.
Well, actually, we'll just skip to medium on the fan, low on the control,
because we know that low and low is going to stall out because the bearings are too stiff.
So this is medium on the fan and low on the control,
which in theory I would have expected to be the lowest achievable speed
with the bearings the way they are.
But for whatever reason, high on the fan and low on the wall control,
I think is a little bit slower.
I guess there's some resonant frequency or whatever taking place.
This doesn't look bad.
I just think it looks more full and more aesthetically similar,
more aesthetically fluent with five.
Now, on the other hand, some older traditional style fans,
this I would not consider this a traditional style fan.
I would consider this more of a 90s era modern style,
even 2000s modern style, quite frankly,
because in the 2000s it wasn't monochrome yet.
Some traditional style fans look better with four
because it's just more of an old school look.
This is a decent slow low.
It's a touch faster than I'd prefer.
And now when it's running that space there in between the irons
to me becomes very obvious.
I'm going to turn off the fan on the pellet stove here
so we don't have any other airflow patterns in the room.
Let's see if we can feel any air coming down.
Nope, I don't really.
I'm not even really detecting any air.
There's just nothing.
That's kind of disappointing.
So now we'll go to high on the fan.
Low on the wall control.
I think it's going to slow down a touch.
I tell you, this fan looks so good in here with these lights.
It's a great, it's a great fit.
It really comes full circle.
It's period correct.
That flickering laptop screen is really ruining the frame.
I'll turn that around.
Okay, now let's go up to medium on the wall control
and low on the fan.
Oh, duh, the fan is off now.
Okay, so this is medium on the wall control, low on the fan.
This is a pretty average like functional low.
It's too fast for my preference aesthetically,
but it's pretty average from a functional perspective, I think.
Like a stock low speed.
As far as the airflow is concerned,
there's a very, very slight breeze coming down, but not much at all.
Okay, now we'll go to medium on both.
And I'm not noticing a significant change in speed, maybe slightly.
Yeah, a little more air.
This is high in the fan, medium on the control.
So this is the wall control's kind of factory medium, if you will.
And I think it slowed down a touch.
Yeah, it did.
All right, so I'll go back to low, put the control to high.
Now we'll just look at the factory onboard control speeds.
So this is the fan's factory low.
It's a pretty average functional low speed.
Well, it's not super functional on this fan
because this fan doesn't move a lot of air, but it's pretty average.
A little more than like probably 70 RPM or so.
Yeah, 70, 75, somewhere in there.
Too fast aesthetically for my preference.
And the airflow is very, very minimal.
It is there.
You can feel that there's air moving, but it's not much.
There's the factory medium.
I do think this is pushing more air than the five blades was.
It's not a particularly strong breeze, but there's certainly air moving around now.
I come over here by the couch.
I can feel air kicking up, but it's not an impressive amount.
It's very gentle.
Let's go to the high, which of course is the fastest speed.
Yeah, that moves more air than it did with the five blades.
It's still not impressive.
There's definitely a lot of other Hampton Bay fans that push much more air,
but this is more respectable than it was before.
Yeah, definitely stronger with four blades, which is kind of what I expected.
Now, if I come over here by the couch,
yeah, there's a significant breeze kicking up over here,
and I can see some plants moving around.
So this is definitely an improvement in performance to run it with the four blades
instead of the five.
And curiously enough, now it's running fast enough that that ring around the
irons makes, it's not noticeable that there's a brakes in it.
Yeah, this is a significant difference in performance.
This is much better.
Now, is it more powerful than two?
I don't think so.
I think that the two is actually still stronger.
The motor in this thing is just very, very small.
It's definitely a disappointment compared to other Hampton Bays I've used from the era.
I can't really tell the difference in the blade quantity on high.
Yeah, I'll just leave it.
I'll put it back to medium.
I need it on for the heat now anyways.
I'll shut it off on the wall control, then I'll put it back on after the video.
This isn't bad.
This is better in terms of performance.
I do think that it looks better with the five blade configuration.
Looks more full.
This kind of tries to make it look like a more traditional fan,
but it's not a traditional fan in my opinion.
This is a very modern style fan.
Not modern by today's ugly monochrome standards, but modern by the 90s.
It stops so fast.
Definitely got to change out the bearings in this thing before we use it again.
