Pocket Watch Cases and How to Open

Chrono Chronicles
8 followers
4 Video Views·Oct 29, 2025
How to open 5 different types of pocket watch cases. Swing out open through the front, screw front and back, hinged snap back, button open back, and snap on.
You should only try to open a case that you would use a case opener on with a case opener. Yes you can use a pocket knife but a case opener is way better.
I will briefly explain various types of Saku watches that you will find when collecting them.
One of the questions I get most often is,
how do I open this watch?
I mean, I often see it.
Do I have to open the front screw?
Do I have to open the back screw?
How do I open this watch?
And what I have here is a collection of about five different types.
The types are different because their ages are different, their styles are different, everything.
However, the mechanism of opening them all is sometimes similar, sometimes different.
However, I will show you how to see and decide which one you need to do.
I will start with this one.
This case is a case that can be sewn out.
It is opened through the front.
You can't open it from the back.
And when you look at a watch like this,
you will see that the edges only have one stitch.
That is the main indication that this is not a watch that can be opened from the back.
So, we take it and you have to release it from the front to reach the machine.
There are two possibilities here.
The first is that you pull the bar and the second is that you don't have to pull it.
I always advise you to try pulling the bar first.
You hear the click sound, you know you're fine.
There is a little tick here at number 6.
Just put your bar in there and it will open.
That is a general case.
You can find it in various types.
Size 16, 18, 12.
I mean, it doesn't matter what size it is.
Very often when you have a case like this without sewing,
except at the front, it will be a case.
Release the front.
Now, I will switch to another case where you release it.
This is a type of general train watch case.
This is attached with a handle.
You will find a watch that is attached with a lion pin.
Both will look very similar.
But one thing you will notice is that there is no hinge.
When you look at this case, there is no hinge around the edge.
And you will see there are two stitches.
So, you know that this case is open at the front and back.
One thing you need to pay attention to is whether there is a part that is lifted on the side or not.
If there is no part that is lifted,
there is a possibility that this case is open with a screw
because they put a little lip there to let you know.
Okay.
And one thing you need to know is
you really can't damage an open case by trying to open the screw.
Okay.
The case will keep spinning and spinning and spinning.
You try to open the case with the screw at the back and the screw at the front,
you can mess up the snake.
You can damage the chassis.
So, it's always better to try to open the case screw
than to try to release it as the first thing,
especially if you don't see the part that is lifted here.
So, this is relatively simple.
Just open the back screw and you're done.
Always be careful when reinstalling the case.
Don't let the chassis slip.
After enough practice, you will get used to it.
The front part can also be opened because this is a watch with a handle,
which means you have to pull the handle to set the time.
That is something you will find on a train watch.
In this case, you don't have to pull the lion's tail
or do anything other than opening and reinstalling it.
Now, we will move on to one of the places where I talk about lips.
I chose this one because it's very prominent.
You see this here, which is placed on the side,
shows that this is a pop-open casing.
You know, this is a snapshot casing.
And sometimes you can open it with a nail, sometimes not.
Often, this casing has a secondary cover inside.
Now, you don't see a small place with a raised part,
but you will usually see a part like the one you see there,
which actually has a cut.
You can use the Arloji Saku pop-open, or just a pop-open,
and this tool will immediately slide there.
Then you just have to open it.
One of the things I always consider a good idea
is if the box is really tight, don't just pull it.
Slide your pop-open around the edge because that's where the hinge is.
The box will get tighter and that can cause it to open without having to pull it.
It should also be remembered that this box is a hunting box.
So, open it from the front.
Always press the button before you close the lid.
You don't want the box to break,
but one thing you will notice is that you can see the hinge.
You know, that's obvious.
You know, you won't have a box that can be opened with a screw that has a hinge.
It doesn't work like that.
Hmm, maybe there's a combination of a rear hinge and a front screw,
but you're more interested in the fact that the back has a hinge
and that will allow you to open the watch by opening it.
Now, someone who is used to European watches will see this type.
Well, there's no part that's lifted.
There's a hinge.
But one thing you need to pay attention to before you open it is to look at the top.
There's a button.
There are many European or British casings that have a button.
You just have to press the button and the casing will open.
Once again, inside you have an open inner lid like the previous one.
Don't close it quickly.
Press the button.
And that's a casing with an open face with a button.
So, just because the casing is open, don't assume that the casing will open just like that.
You press the button and the casing will open.
But as I said, you will find it more often on British watches,
some Swiss, French watches.
It's more of a European thing.
This one is a little weird.
A little weird.
This company is weird, but the casing is very simple and basic.
You know, this will be a casing idea that will make you angry and want to keep looking at the dollar.
You know, there's no part that's lifted.
You can try to open it, but as I said, the casing will spin and spin,
and you really can't break it.
This is a cheap casing.
This is a cheap casing made simply.
In this casing, put the right knife behind the edge and open it.
This will be installed and removed easily.
Depending on the watch, it depends on how you install it.
This is Manhattan, so you don't have to pull the handle on Manhattan.
You pull this small handle to the side.
But this is the only company that uses it.
If not, you will have dependents where you pull up and press down on the handle to install it.
So, basically, those are the five casings that I usually find.
Hmm, most often you will find the front part that is screwed, the back part that is screwed,
or the front part that is angled, the back part that is angled,
or you will find a casing that can be pulled out.
You will find a lot of pop-ups, but most of them are low-quality watches.
And of course, it depends on where you are, Gaya Eropa with a button on top.
There are some others that I haven't discussed,
hmm, but this will give you an idea of what you will face.
