The ULTIMATE Whitetail Arrow - Low Poundage & Short Draw

Crossbows Legacy
11 followers
1 Video View·Oct 26, 2025
Today we're going to be building the ultimate whitetail arrow. This is my 2025 whitetail arrow.
It's a Victory HLR 5mm 400 spline arrow coming at a total of 377 grams. Before I break it down,
let's go over my setup from last year and determine why I'm making this switch.
Last year, as well as the season before when I shot this velvet deer, I shot a VAP TKO 4mm
also 400 spline arrow and it came out to a total of 440 grams, so quite a bit heavier.
So the reason I'm making the switch is actually speed. Last year I had one too many deer duck me
and they determined I needed something a little bit faster. That's when this lighter GPI arrow
came in, the Victory HLR. So now that you know what I'm shooting, let's break down the setup.
The first part of my build is going to be the arrows themselves, the Victory HLR 5mm arrows.
They do come with their own componentry but we are going to be upgrading it
for components. We're going to be using the Podium Archery half outs. These are 30 grains,
they do have 50s as well. For veins, we're going to be doing the Mini Super Sabers DCAs.
Shot them last year, really love them. And then for broadheads, broadheads are going to be changing
it up. Last year I shot Grim Reaper Micro Hades fixed blade broadheads and this year we're going
to be trying mechanicals. I raised my poundage and I think it's finally time to give them a try.
So this year I'm going to be shooting the Evolution Outdoors High. It's a smaller
mechanical broadhead and it's also kind of a hybrid. It has both fixed blade as well as
the expandable. Next we're going to be doing the Beast broadheads. These are the Titanium 125
broadheads. Read a lot about them and I think they're going to be a really good pick for this
year. So now let's get into the arrow build. Alright so the first part of the build is going
to be cutting the arrows. I already have a few practice arrows built so I'm just going to take
the measurement off of this one instead of drawing the bow back. So we're going to line them
up and I'm going to come right here and draw them right exactly where I want them to go.
Once we have all of our arrows cut, the next step is going to be to start squaring them.
The trick when you're starting squaring arrows is going to be to mark the end of them with
silver sharpie. I like to do both the side that I cut and as well as the factory side.
And what you're going to do is square the arrow until all the silver sharpies are removed.
No silver. And do the same thing on this side.
Like that. So we're going to do all these arrows and then we're going to get to fletching them.
So now that we got all of our arrows squared, the next thing we're going to do is start fletching
arrows. So whenever I'm fletching arrows, I do like to use the 8 and not the standard with the
HLRs. But when I'm actually shooting in the field, I'm going to be using lighted knots.
Lighted knots when you're using them in Amazon, these are the CF ones. I'll link them in the
description below if you want to check them out. They are a bit cheaper. So putting them in the
jig, I'm going to line up the spinal line with that light blue section. That way my cock feather
is exactly on the spinal line. I'm going to set the V cage in the jig. And for those of you that
don't know, this is an Arizona easy fletch. One of the easiest ways to get a helical fletch
without having a V cage on. Put them in there. We are going to use a primer pen for these.
Now that we have them in front, we're going to come in with the glue. The glue I like to use is
Bob Industries. I get this from podiumarcery.com.
I kind of like to spread it out a little bit. This Arizona easy fletch does make it
faster to fletch rather than bits and bobs when you have to do one at a time.
It's kind of speed up the process. You can get two of them and get out or something.
Pull down.
You only got to let it sit for like a minute. If you had two of them, you can
multipass and do one dry. So we're going to get them all fletched and then we'll bring
it along to the next step. So now that we have all of our arrows done, the next thing we're
going to do is add a little bit of glue. We're going to add it to the front and the back of
each vein. And this just adds a little bit more protection whenever you pull an arrow to target.
And this is going to be the Fletch Tite glue.
We're going to do all of our arrows and then we're going to start adding some inserts.
Alright, so now that we have all the glue added to the arrows, we're going to start
adding some inserts. So again, these are the Podium Archery titanium half outs.
I got the 30 grain ones to get a little bit lighter.
With our inserts, we're going to do Hot Melt. This Hot Melt is also from PodiumArchery.com.
It's a bit stronger than the last time I had used the bony one.
So all we're going to do is heat up the insert a little bit, heat up the glue,
Heat it up a little bit more and we're going to go to put it in our arrow. Put it in,
spin it a little bit, press down, make sure that it seeps all the way.
Alright, we're going to continue doing all of our arrows like that.
So now that we have all of our arrows Fletch and our inserts installed, we're going to let
them dry overnight and then tomorrow we'll finish our build out by adding knots as well as inserts
and then we'll just take them to the studio. I'll see you tomorrow.
So after building our arrows last night, I added some lightened knots this morning and we're going
to take it outside and shoot. We have the Garmin outside. We're going to see if we can get an arrow
speed and then maybe get some group and downrange as well. Let's see what our speed is.
So this is a Matthews Lift 29.5. My draw length is 26.5 and I'm shooting 58 pounds.
We got 268.7. Alright, we moved back to 40 yards. We can see if we can get a grouping down there.
That one looks pretty good. Let's go get another one.
That one looks good. Let's do one more.
Work a little right on that one. Go check it out.
The first two shots definitely felt better than that last one.
Yeah, so the first two broke pretty good. That last one was just a little bit right.
We're going to add some broadheads to it. Let's see if we can get it. Still shooting good. Alright,
so now that we shot those field points, we're going to see if we can do the same thing with
some broadheads. I have some practice broadheads here. The first one's going to be the Evolution
Outdoors Hide 125. We're going to see how this one shoots and then also have another one we're
still at 40 yards. This is actually a hybrid broadhead. Worked pretty good. Next one is
going to be the Beast. The beast I'm shooting this year is going to be the Titanium. This
is their practice point. We're going to give that one a go. This one flies really good,
like a field point.
A little high actually on that one. Go check it out.
Both of those actually shot pretty well. This one's going to be the Evolution Outdoors Hide
and then this one is the Beast. Really excited to give both of these a try this year. I think
they're going to perform really well. We'll see how they do with mechanical because it's
the first year I shoot mechanical. That's a wrap for our arrow build video. Thanks for
following along. Smash that like button and subscribe if you haven't already. See you in
the next one. Now let's put it through a deer. I get like a blooper at the end.
