HOW TO SET UP YOUR BOW FOR TURKEY HUNTING

The Technology of Old Crossbows
4 followers
4 Video Views·Oct 25, 2025
HOW TO SET UP YOUR BOW FOR TURKEY HUNTING
Comments are disabled for this video.
Welcome back to another video. Today we are in the shop and we're going to get ahead of the ball
and get our turkey set up 100% ready to go because I feel like we're going to be super busy. I just
want to get it done. I have the right mods. We have the Matthews RS which is going to be a fantastic
turkey bow because if you guys have watched my videos in the past I love sitting on the ground
like a natural blind or no blind and being a super small bow is going to be super sweet,
going to be the ticket. We have our be real turkey arrows that will be live very soon on
the website. Once again we did a small run of them last year. Ginormous fletching x-vein so the
material has a little bit more drag to it which is what you want. You want a lot of drag when
shooting these giant head chopping broadheads. These are the Magnus Bullhead 125 grain. I believe
it's a four inch cut on these. They also have 100 grains which is a little bit smaller cut
but I really like these big dogs but you need big fletchings on these so we did a four fletch.
Super right helical. We did a right helical because these from factory the blades are actually set up
for a right helical so even though with the Matthews bow with the strings that they have
it should require a left helical but these are such big dogs and with this that it overtakes
that helical. It has no knuckleball effect. We've done a bunch of slow-mo stuff it just
takes it right away and turns it to the right and there's not because for those of you that don't
know depending on the strings that you have depending on which way it turns the arrow
naturally kicks out one way or another and you don't want to fight it because if you fight it
it creates a knuckleball where essentially the arrow starts going and then starts going the other
way so you don't want to create that but these fletchings are so aggressive along with the
broadheads being so aggressive right that I don't have any issues with it. Also for the month of
February, well I guess we got a lot going on right now. Live Sika came out with boots.
These are their new boots. Sika is now in the boot business. These are the vent light boots.
I've only worn these a couple of times and not really super extensively but I've talked to a lot
of guys that have worn it. They're super breathable. They're using Gore-Tex in this all the way down so
it's like a rubber boot but it's really a hybrid rubber boot and then they also have a like a it's
like a hundred dollars cheaper and it's more of your regular rubber boot but we got our new vent
light boots by Sika and the reason why I'm talking about that and then all what's in this box what's
in this box. We have turkey vest from Sika. We have Equinox guard gloves, Equinox guard pants,
Equinox guard hoodie. What is this ambient? I think this is ambient. Pretty much everything
you see on this table we are now giving away on berealcustom.com. We're doing yet again another
giveaway and this might be our biggest giveaway to this date. The boots, a full Sika turkey package.
We're giving away three turkey arrows, broadheads, and a brand new Matthews of your choice
to be completely set up for this turkey season. So what we're doing on Bureau Custom, every order
is an automatic entry to win. However, if you buy a six pack of arrows, any of our offerings
of arrows, a six pack, you get 10 extra entries. So we're giving away a lot of stuff in the month
of February. Sika gear teamed up with us because they launched their new boots. So you'll be able
to get all this new goody stuff a chance to if you check out Bureau Custom. But what we're going
to do today is fully set up my bow, just kind of run through the process of what I would do
to be ready for turkey, and then I'm going to put it on the shelf and just have it ready to rock and roll.
Also the turkey vest is now in like the OD green color. I'm not sure if they had that last year or
not, but I absolutely love this turkey vest. So if you're a mossy oak guy or any sort of guy and
want to check this vest out and have it not clash with everything you got going on, definitely
something to check out. Absolutely love that vest. I've ran quite a few vests too before. Okay,
step number one, what we're going to do is we're going to get our arrows all set. I just don't
have the inserts in. What we do for these arrows is we swap out the stock 50 grain all aluminum
outserts. We swap them out for you guys to a 75 stainless steel core. Super strong, a little bit
heavier, and of course aluminum. It's a little bit weaker than stainless. Over time they just, if you
hit something hard, they just kind of bend. So we're kind of getting out in front of that offering
stainless, just kind of stock with our stuff. These Magnus bullheads have been really nice. We shot
quite a few turkeys with them. Maybe we'll throw up a little mashup right now of heads getting
chopped off. But I have really loved these broadheads. They've done really well out of
kind of all of them that I've seen. They do good and they come with a couple replacement blades. So
I'll shoot into like a pillow garbage bag thing that I created and if you do that a couple times
they do end up bending a little bit so you can swap them out and have three fresh broadheads
once again. So I need, we'll use this Victory Black Fusion glue when putting in inserts or
outserts. It's kind of permanent, it's semi-permanent when you do that. You can heat them up if you want
to take them out with a heat gun or boiling water. We don't recommend fire because fire and carbon is
no bueno. So make sure that this gets, yeah there we go. So how you put these in, you just put, you
don't need a lot. Just kind of put it all around there. I had a comment in our arrow building that
oh you didn't clean the inside of the shaft out. Well I've gone back and forth on that, talked to
a lot of people about that and kind of where I stood, I think it was Jesse Brawater who's like
one of the goat's best archers in the entire world. He never cleans his arrows out and I'm like why
don't you ever do that because I was psycho about it. Use a q-tips, even use like the all sorts of
cleaning things. He's like man, he's like I just really don't see a difference and in his head
if you make it squeaky clean it can't adhere, it doesn't adhere as well to the carbon. So I was
like I'll take your word for it. So we have done thousands of arrows over the last several years
and we have no issues. They are very almost impossible to get out unless you get them with
some pretty good heat. So let that, I'm kind of doing this kind of by the seat of my pants. You
should let them dry standing up at a perfect angle upwards for a little bit but I'm just
going to hold it here for a sec and then lay it down. You don't want to lay them down off the get
go because there is slight tolerances in there and they could kind of dry like this but I'm
risking it for the biscuit just to get it all done in this video. Do the second one here.
You want to spin it to try to get as much all around that that you can.
Put it dry here for a second and I'm going back and forth. I think I'm going to stick with a five
pin. I might end up switching but I'll just stick with the five pin right now because I don't think
I have a single pin cartridge laying around. Typically I like to switch to a single pin for
turkeys because you're shooting them 10 to 20 yards. You really can't shoot them any further
than that with this big setup unless you're Robin Hood or something. So I might end up switching to
a single down the road and just kind of get set up and I know that I'm sighted in for 15. If they're
at 10 it's going to hit an inch high. If they're at 20 it's going to hit an inch or two low
and you got the vertical neck. You know left and right is your biggest thing that you're worrying
about with turkeys. Okay grab one of these fresh ones. I'll show you guys an arrow fully built.
So we got that big dog on the front, 125 grain head, 75 grain outsert, rip tko's, full length.
We're selling them completely full length with these giant x-vanes on the back. Extreme right
helical clamp at a bit's jig. So it's a mean arrow. Let's see the weight of it.
Forget exactly what it is.
543 grains so it's like a freight train going out of a turkey's head. You feel bad about it but
it's the best way you know obviously cut them but also just sheer force knocking them out. So
I think it's most the most ethical way to shoot them with the bow. If you bow hunted turkeys you
know I've done it in the past when you do the body shot it's just so tough and you end up having a
lot of wounds over your career of shooting them because you just the feathers and if they're full
strut and turned a little weird I feel like it's just really tough sometimes shooting the body. So
I've a hundred percent gone away from that and just doing head shots if I'm shooting them with
bow. Of course people say they deserve to be shot in the head with a shotgun more power to you. I
also agree with you but I do love shooting one or two with the bow every year because it is fun to
get them in tight a little bit of extra effort with the decoy and everything. It is fun it's
fun to do at least one or two times a year you know if your state has a couple tags dedicating
one and just trying to do it I think it's a lot of fun. Okay so what we're going to do now is this
bow let's see how many pounds this bow is. This is my RS shot my Kansas deer with it this year
a couple does 79. Do not want to shoot a turkey with 79 pounds. I have done it before but it is a
little bit of overkill. So what we're going to do is we're going to swap out mods. I got 70 pound
mods and then I might even crank the bolts out a little bit just to get it down. I mean you only
need like 60 or 65 pounds. So switch weight mods of Matthews you guys should know if you don't know
you can adjust the poundage through the mods you do not need to switch out the limbs or anything
like that. So you can switch these out for big big poundage adjustments and then of course you
still have the limbs and the limb bolts to back in and out for fine-tune adjustments in the 10
pound range but this you can literally go from 60 pounds to 80 pounds just by switching the mods
around. Yes the mods still do switch the draw length so you can do all sorts of things you just
need to get a new set of mods if you do decide to switch things around and those are available now
online on Matthews or Lancaster everything else so you don't have to go to a dealer to do that stuff.
Okay so the mod pops out just like that this is the new one you can see that they're slightly
different design and that's just the the draw curve a little bit different. So those were 75
pound mods these are 70 pound mods so we're dropping five pounds so I probably will
back down the limb bolts a little bit just to get it down a little bit more at least a 70 65 to 70.
They do run a little hot if you know I've gotten messages or whatever it's like I bought a 70
pound bow and it came in at 72 what's up with that? Well would you rather have a 72 pound bow
or a 68 pound bow is how I like to put it and that's kind of how Matthews think is they always
kind of err on the little bit higher side because you can always turn it down a little bit but it's
obviously you can't really turn it up but you can back the back bolts out to get down but you can't
turn them down more to get it up. So bows typically run a little bit hot from when they're advertised
for that's just kind of precautionary because they are strings they do you know settle and
things like that so manufacturers tend to err on the higher side by a pound or two.
Simple allen wrench in here nothing fancy no special tools no bow press no nothing if you
want to switch around or whatever super easy get on there find a mod chart figure out what you need
everything's labeled you mess around do whatever. So for those you don't know the RS is a 27.75
axle axle bow so super small bow also comes in low draw length ranges so this is this is like a
youth slash women's bow slash shorter draw bow so I have this in 28 inch draw length in the heavier
set of limbs but if you're 14 year old kid 15 year old kid shooting 40 pounds you can get them in the
lowest set of draw range poundage range and fit right into that and then if you outgrow that
then you can get a new set of limbs to get in a higher range so super flexible this year with the
RS it pretty much replaces the Prima which was the women's slash youth bow so it's great that it's all
in one chassis. So just like that we swap the limbs out or the mods out let's double check
that's all good let's do poundage definitely easier 74 so it dropped it exactly five pounds
but what I want to do is let's back the limb bolts out you always want to match these if you do the
top you want to match it with the bottom one and these have been cranked down and haven't been
moved yet so we're gonna give it one full turn while I'm janking this okay so that's one let's
do this this is easier and one so we got one full turn out of both let's see what we got
for a new poundage draw length got a little longer too just a touch I can feel 66 wow that dropped
it a bunch I might keep it right there 66 pounds feel like that's a good little turkey range right
there okay so I got our bow dialed in now super easy I mean that took like five minutes swap those
out and now what we probably should do is shoot this thing through paper check our tune I'm
running these are 250 spine we're going to offer 250 spine and 300 spine depending on your range
and everything like that but since it's a lot of weight in the front and huge broad heads and huge
veins you definitely want to bump up in spine so it's like we recommend if you're like 65 plus
pounds just to run the 250s they'll be able to tune a little bit better then if you're under that
getting a 300 really you could if you're right there around 65 I could for sure tune this to a
300 spine you're right there on the line but I'm just gonna for for simplicity's sake keep with the
250s because I got a bunch of 250s already set up and rigged for this so let me get the tuner
situation all dialed in we got it we upgraded the shop too I got an Amazon squat rack if anyone
out there wants to sponsor me for a fancy squat rack go ahead we were just out in Texas so I had
to I had to squat that thing at least twice so that I could say I put in a little bit of effort
beforehand because it did kick our butts we're running out of room we're running out of room
wherever we go warehouse shop we're just out of room keep killing things that I got to mount
freaking odd that I just shot last week it's like oh yeah this skull mount would be good
freaking giant it's like now we got to mount it all right enough complaining I'm sorry I need a
90 to 125 field tip which I'm not sure that I have so I might have to risk it for the biscuit
and just shoot a hundred grain because I do not see a 125 grain in my possession okay I hope that
this is just right on but as it always goes it might not be and you can see how far in front
these arrows are you that's what we want we want uncut arrows so that the broadhead gets way out
in front and I'll show just some precautions once we put the broadhead on kind of what to look out
for shoot yep we got a pretty good tear there straight knock low tear so we're gonna have some
fun messing around with that and just swap mods out just just did the move the bolts all around so
makes sense that we're a little off so let me dissect this and try to get it good
with these turkey arrows I will say if you get them or messing around with your own or whatever
you may have to take some things to extremes to get it shooting good because these things
are very sensitive to shoot a hundred percent of bullet hole because we're just dealing with
big variables super sensitive so it always takes a little bit of work to get it to get it good
okay now we're knock high which is good it was reactionary so first one was knock low that's
knock high we're gonna meet in the middle now I did rip on it so it's always good to get a quick
reaction you always want the worst thing is when you're changing stuff and nothing's happening
nothing's happening nothing's happening so to get a quick reaction to know which what where you're
kind of are in the ballpark is I don't know if that's proper but that's always what I do and
then I can just know okay help me get right back in the middle here since we have four fletchings
two you want to make sure that your arrow is knocked like that you don't want it knocked like
that you know you want it like that you know just make sure that you have it knocked correctly for
good clearance whoa look at that I got a bullet hole ladies and gentlemen but now what we're
going to do is we're going to get set we're going to get a sight tape on here and get sighted in
for these arrows for this bow because this is fortunately my dedicated turkey bow for the
spring I'm not going to have to use it for anything else so we're just going to completely
convert get a sight tape now shoot from inside outside because it's about 12 degrees outside
we're going to do the same process as we were to be with any other arrow we're just going to get a
new sight tape so we're starting out at 20 yards I have my five pin in and I'm aiming with my middle
pin and on the right side I have my setup tape and I'm all the way up to 20 yards a little 20
yard dash I know it's going to be roughly close just based on the previous setup hopefully I
don't miss or you just slow those big arrows going down there just look like sloppy messes
okay wow hoping that's the wind I'm getting a little bit of kick out of them
a little windy out there okay it's about good all right a little low still it is very windy
out there now that I walk outside so if you guys are seeing weird arrow kicks we got a bullet hole
so it's just the wind in the dot little low right all of them in the dot though I'm going to call
that my 20 yard mark so if you wanted to you could put you know in this situation if you have your
you know your one bow your normal bow you're like I'm going to make some turkey arrows and I'm going
to you know switch everything around totally fine what you can do is use just this plate so you can
put the setup tape on here take it off and put your turkey arrow sight tape on here and then
leave your normal sight tape for your normal bow hunting arrows on this side so you can run a dual
sight tape for two different arrow setups also if you wanted to you could swap out this cartridge
system for a different cartridge system just for your turkey setup so without having to dismantle
everything I guess that's the objective that I'm trying to do is how can we shoot turkeys in the
springtime for a couple of weeks without tearing apart our entire setup so one thing is the arrows
another thing is the sight tapes just trying not to disrupt too much to to be able to bow hunt some
turkeys now what we're going to do is we're going to shoot into this pillow but it's just going to
take me a minute to get it all set up our redneck ingenuity is at an all-time high currently
we're shooting through the new gym rack onto a clothing rack that a garbage bag hanging full of
soft debris is located it's my way I like to just test these out shoot it real quick
just at eight yards because that's about as close as I would love a turkey to be
not always the case but what we're going to do is just make sure that our broadhead is turned
appropriately so that we're not going to hit the sight or anything like that so you got four
options with the four fletch which is nice you can see we have the broadhead spun just like this so
when it pulls back we're going to have one blade here and one blade down there depending on what
site you have you just want to make sure that one of the blades when you pull back doesn't hit the
sight bar or anything like that so luckily with the four fledge you can spin it a couple different
ways like right there it probably wouldn't be great there it wouldn't be great but right there
is totally fine we're gonna have good clearance so we're gonna go ahead and shoot this bad boy
see if we're anywhere close to it
okay I was aiming a little low because I was thinking I was gonna go high
but it went exactly where I was aiming looked like it flew pretty good too so let's do it again
and this might be due to the 125 grain because I just did that whole process with 100 grain so
I'll just aim right on it now see if we can I cut a little arrow wrap just in half for my aiming point
dang close if I didn't drop it I think it was unscathed but I was right there and this is why
having the extra blades is kind of nice because you can just after a while you can tell that
these blades just kind of those two didn't bend but this one already started to bend just a little
bit so dedicate one blade or one broadhead to practicing shooting a bunch and then you have
the extra three blades when it goes time to hunt just swap them out there's just a little tiny
little tiny phillips heads right there just pop them out and you're ready to roll turkey bow is
completely set up it was actually really easy I feel like every now and again we run into some
roadblocks but I feel like we got a good system with the arrows the broadheads we've been doing
it for like three years now this whole setup so lift rs is ready to rock and roll it's going to
go up on the shelf until turkey season I might end up switching the five pin for a single pin I'm not
sure on that yet but it is nice just to have one aiming device for aiming at a little tiny head at
15 yards so make sure to get entered to win to the bow and sick of gear giveaway at b-roll custom
make sure to check that out goes all the way through to the end of the month so don't miss
out to potentially win something really big so thank you guys so much for watching
we'll catch you guys in the next one
