Tired of drafts sneaking in through your doors? Learn how to easily replace kerf-mounted weatherstripping and restore your door's seal with this simple DIY tutorial. No special tools needed—just a few minutes and the right replacement strip! #weatherstripping#DIYhomeimprovement#doorrepair#draftproofing#kerfweatherstripping#energyefficiency#homerepair#doorsealing#weatherseal#handyman#diytips#dirtfarmerjay#homeprojects#doorupgrade#winterproofing#sealthegap#howto#doityourself#exteriordoors#homeimprovement Buy your DFJ T-Shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop Replace Kerf Weatherstripping Like a Pro! In this video, Dirt Farmer Jay shows you how to replace kerf-mounted weatherstripping on your exterior door—a simple, effective project that helps keep your home energy-efficient and draft-free. Most modern exterior doors come with integrated kerf-mounted weatherstripping, which fits snugly into a narrow groove (or kerf) around the door frame. These weatherstrips typically feature a flexible vinyl outer layer and a foam core that compresses to form a tight seal when the door is closed. Over time, they can degrade due to UV exposure, wear and tear from pets, or general aging—and that’s when it’s time for a quick replacement. What You'll Learn: What kerf-mounted weatherstripping is and why it’s so effective
How to remove the old strip safely using a putty knife
How to choose the correct size and style for replacement
Step-by-step instructions for cutting and installing new weatherstripping
Pro tips to ensure a snug, professional-looking finish
Pro Tip: Door sizes vary, so make sure you buy the correct length—typically 32" or 36". It’s a good idea to bring a sample of the old weatherstripping to your local home improvement store to match it exactly. The product local big-box improvement centers had kerf-fins that were too narrow to hold tightly in the kerf. We bought a product online that fits well: https://a.co/d/iBEz6vQ. Installation Steps: Use a putty knife to gently pry the old weatherstrip out of the kerf.
Start replacement at the top (header) of the door and work side to side.
Trim to size using scissors or snippers.
Press the header strip fully into place.
Cut and install each side strip, starting at the top and fitting against the header.
Finish by pressing everything firmly into place—done!
This quick and affordable fix can drastically improve your home’s comfort and energy efficiency, especially during the colder months.
👍 If you found this helpful, please like, subscribe, and share with your DIY-loving friends. Don’t forget to hit the bell so you never miss a new video from Dirt Farmer Jay!
Hey, Dirt Farmer Jay here from der
farmerj.com. Has the weather stripping
on your door seen better days? Has the
dog tore into it? Perhaps the sun's
beatated up or it's just not doing the
job anymore? Well, it's a lot easier to
repair, replace than you think. Stay
tuned and I'll show you how.
Hey, Der Farmer Jay here from
durmerj.com.
It's highly likely that the doors in
your home were actually what's called
prehung units. If it's not a historical
house and it's been built in the last,
let's say, 40 to 50 years, many times
the door unit itself was prehung and
they use what was called a curve cut uh
weather strip that is mounted inside the
door and the edge over here. This strip
goes into a slot that's cut along the
edge here. But over time, as you can
see, it starts to give up the ghost.
This has been hit with paint a couple
times. Lot of sun exposure. And how
about this right up here? Look at this.
It's really giving up the ghost there.
Right. So, to replace this, it's really
pretty easy to do. Now, the first thing
you need to do though before you pull
out all this strip is just to pull out
one section. And I would recommend
either the side or the header and take
it to your home center to make sure that
you get an exact match. You should know
we attempted one time to demonstrate
this to find out what I had in hand from
the local home center. The blade that's
on the back of it was way too skinny and
it would not stay in the slot. So, we'd
put it in and it would just fall out.
So, I had to actually go online, buy a
little bit bigger slot um blade. And
I've put that link down below uh in case
you have the same situation where you
can buy this a set of two sides and
what's called a header. But with that in
mind, once you start to remove all this,
this is pretty easy. This is removal.
Get a putty knife behind it. Pull that
out and start to get it to move. There
we go. And you can see the knife blade
right there. I'm just going to move that
out. And that whole thing is going to
come out. There's the piece. And you can
kind of see the knife blade edge right
here. That has to be the new one has to
be thick enough with enough width across
it to grab in the slot that's behind.
So, we're going to go and drop that off.
We've actually gotten the new one ready
to go. I'm going to pull the header here
for the same way. And we'll just get
putty knife behind it and pull. And
there you go. As it comes out, there's
now the header. We'll get rid of that.
And then we'll do one last one here,
which again I'm going to put the putty
knife right here. Rotate. And you can
see it start to pull out the blade on
the hinge side as well. And now we're
going to just pull that all out all the
way down. And now we have disposed of
these. Now in one other set, what
happened right down the bottom, the dog
we had at the time really from time to
time would like to try to get out and it
just tore this right up. So, if that
happens around your place, here's the
easy fix. And you can actually keep a
couple of these spares to repair it when
it gets to a point you go, I can't look
at that anymore. All right. So, here's
the new material. And you can see the
shape of it here. It's got fins on the
end here. So, that's wide enough to
wedge into the slot. This is the part
that's going to compress against the
door, sealing the gap around the door.
Now, this is bought online at the link I
told you about. that's uh down in the
description below. And so it came coiled
up. And so you're looking and going,
"Well, that's not going to work."
Actually, it'll be fine because as we
put it into place, it'll relax and it'll
gain a new memory. So the next thing we
need to do is measure side to side up
here all the way from the outside corner
to the outside corner. Not this corner,
the one back up in here. And put in a
piece that runs from side to side. This
is called the header. We're going to put
the header in first. Then the two sides
are going to come up and butt up under
it as though they were holding it up,
even though they're not. But that's just
great protocol. Okay, so let's just go
ahead and measure that from corner to
corner. And what I've got is right at 32
in. So I'd call it 32 in strong. Let's
go ahead and cut a piece 32 in and we'll
get it installed. Okay, we now have our
32-in piece there cut. And now we're
going to just insert the knife edge. So
this is in such a way that it mashes
against the door. So here we go.
Okay, our first piece is installed. Now
we'll go ahead and measure down the side
and put our other piece in. We'll
measure one of the side legs right here
down the bottom where we want it to go,
which is right up against the threshold.
We can go off to the side a little bit
and it's reading right at 80 in. All
right, we've cut this to 80 in. Uh, as
we orient it, we need to make sure this
goes to the outside that way that we
don't somehow install it backwards with
this like cup point coming to the front
here.
This is what comes to the front always.
Right there is the round part like this.
Okay, now that you've got it oriented
the right direction here, let's start at
the bottom down here. We're going to put
that down in the curve and push it down.
Get that in the curve and then just
start
putting it home.
You can also take a block of w wood and
just tap it along here if you prefer to
do that or just press it in.
[Music]
Then all you do is repeat the same on
the other side. Press that in. You're
able to close the door. Now you have a
new seal. It looks great and the door is
sealed better and more weatherproof. And
the next time you need to service it, no
big deal. Here's another thing that a
lot of people want to know how to do in
taking care of their doors. Check out
this video where we show you how to
replace a front door lock set. It's a
lot easier than you think and it'll go
quickly. Check it out next time. You'll
be ready for that job. Until the next
time, this is Dirt Farmer J from Dirt
Farmer Jay enjoying a much better door
setup.