Last episode I build my new work benches. This time I'll turn one of them into a sharpening station with water bath. I'll also finally add some nice dust extraction and hoses to my bx18 and my Shapeoko XL! Enjoy the new episode! =D
[Music]
I'll see you.
Hey, that actually fits very nicely and
it's not even looking too shabby. And
yeah, what can I say? This is where my
metabo um not shockw but you know what I
mean um dust extraction is going to go.
I want to keep the hoses short such that
we have the most sucking power of it all
such that it sucks really goddamn bad.
And now let's see if this hose
fits. It should in a normal case fit
very
well. I'm just going to put it into here
and that should do the trick. Um,
yeah, that's that's basically it.
Nice. There's still one very big dust
extraction problem that I have, namely
with my CNC. The hose that I bought, the
external hose is very long and it really
does a really good job. I really like
this hose and it actually also fits onto
my test tool tools.
But nothing else. If I attach this very
thick hose to the metabo dust extractor
at first and then this shin hose, it has
not very much um yeah suction power.
That's that's a huge problem. That's a
huge problem with me. And so I need to
find a fix for that. And I think the fix
is once again this one right here. What
I'm going to do, I'm going to try to
attach it to this part once again by the
same means that I did before. And yeah,
other than that, I'm going to then put
the tiny hose into this one. And I hope
it's going to fix the suction problem.
Let's
go. I mean, that's certainly
something. And I think it should
actually do the
[Music]
trick. That's definitely a bit better,
but we'll see um how it works out over
time. But what I like is that I can
easily attach it. And if I don't need it
here, I can well just use this dust
extractor and bring it to a different
part of my workshop. So that works out,
I suppose.
So excited. I bought this one um during
Black Friday. You could say it was 60
bucks off. That's the ultimate flush
trim bit by Whiteside. And I'm so
excited to use it for the first time
around. This bit is the reason why I
bought this Fest tool router in the
first place. So, let's try it out, shall
we? So excited about how this one is
going to perform.
All right. Moment of truth. Does it fit
in?
Basically,
yes. Wa! It didn't. It broke. Okay,
that's not
good. That sucks.
Holy How is that even possible?
How can it still be shy of the stupid
bit? God damn it.
Oh, that was such a tremendous pain in
the butt because I made it very very
difficult on me. I should have just used
I don't know like a straight piece of
wood and just use my router to cut
everything out. It was absolutely
terrible. But now I got it done. Um this
took way longer than it should.
My my basin is still broken, but never
mind. I'm going to get new one. But now
it fits in very nicely and I can still
take it out whenever I want. And now I
am satisfied with what I've got for now.
The next thing to do is to use my roller
once again and to put a place in where
my um where my sharpening stones are
going to go. Um such that I can just put
it in here. It's going to fit nicely and
it's not going to wiggle around while I
sharpen things. Also, I'm going to use
um ship's leg. So, leer you are going to
use for for the ship. Um such that this
one right here won't get soiled with
water and is going to start living
again. Uh yeah, this is what is planned
next. Let's go, I suppose. Actually,
let's scratch that idea for now. Reason
for that is that my diamond sharpening
stones already have rubber feet here.
So, they aren't going to slide around.
And also, my other stones that I got,
um, my ceramic stones also have a bamboo
plate under it, um, where you can put
them in. And this also has a rubber
plate attached to it. So, there's no
need for me to go through such a hassle
at this very moment, especially when
when I'm already rather frustrated with
my contraption here. So, I'm just going
to use the leer now and give it its
final finish. And that's going to work
out for now as the place where I'm going
to sharpen my chisels from now on.