Today we will take a look and review the powerhouse by Metabo! The thickness planer really does a great job and is build solidly. Will it be worth it's $700 though? Let's find out!
0:00 Intro 1:15 Setup and First Attempt 4:20 Spruce Wood performance 5:30 Soft Wood Results 6:03 Deep Cuts on Soft Wood 6:52 Hard Wood: Mahogany 8:16 Deep Cut on Hard Wood 8:58 Hard Wood and Thinner Sections 10:10 Thin Stock 10:22 How did it Perform? Should you Buy One?
[Music]
so
it's so heavy
minou what are you doing
good morning fellow woodworkers welcome
back to another video so this arrived
today um and i'm going to unbox it and
tell you what i think about this planner
it's the dh300 by mitabu and i'm pretty
excited about it because um for the
price tag like 500 to 600 euros really
depends on where you buy it it seems to
be one of the best you can get out there
so pretty excited about this one and
once i
um get used to using a planner this is
my first one i can finally create stuff
like cutting boards and the like so
let's unbox it and then let's test it
[Music]
i had to head home the other day but now
i'm ready to try out the thickness
planner from metabo and what i got here
are the manuals the instructions and i'm
going to see if i can find useful
information about
this machine in here and i don't think
so because most of the time instruction
manuals are utter garbage when it comes
to i don't know just regular woodworking
products and i'm probably going to end
up to take a look at some random youtube
video to try to figure out how this
works on my own let's give it a shot and
then we're going to test it out
as i thought this manual really doesn't
help me in any kind of way i'm already
stuck at the very beginning on how to
set up the height of the planner fingers
on this side you can see the centimeters
or inches and if i were to bring it down
this should be about six centimeters
thick but if i get it down to the
appropriate height i can't even move it
into here anymore and it's above seven
centimeters i don't understand it right
now but i'm going to take a look at some
kind of digital manual now maybe i find
one on the metabo website or something
and then i'm going to head back and see
if i learned anything
to be honest watching videos didn't help
either because mitabu doesn't have an
official guide on how to use this
thickness planner also i couldn't find
any real video for the midtable on how
to set it up properly for planning but i
learned something different namely many
planners have the cool little feature
that there's some kind of knob here or
button yes the metabo one does have one
too
when you are going to press it into the
work piece it's going to tell you how
much wood you are going to take off let
me show you
so there we go you see here
if i press here here's the little button
this little arrow is going to go upwards
telling me how much centimeters
millimeters or inches i'm going to take
off in total meaning if i were to put
the work piece under here and i'm now
going to
screw it down a tiny little bit it's
going to tell me that i'm going to take
off
for example 1 16 of an inch now and now
i can put it into the machine and then
hope for the best let's try it out
since i'm pretty terrified of
machines which spin at rapids rates at
about 10 to 20k rotations per minute i'm
going to take this thick piece of wood
at first i'm going to see if it works
i'm going to put it in here then i'm
going to take a step back and i'm just
going to hope for the best and for the
start i'm just going to shave off a tiny
little bit let's say about one
millimeter now let's hope for the best
and let's try it out supposedly those
things are extremely loud so i'm
probably going to relate this part of
the video with a bit of music let's go
ahead and get started
[Music]
i decided to go to even safer route with
more distance to the machine by using
this longer piece of wood and yeah i can
keep my distance this way push it into
here safely and then we are going to see
how it works i'm going to lock
my thickness into place with this lock
up here then i'm going to push it
through and we're going to see how it
works out
it took off a tiny little bit of wood
but not very much i think the reason for
that is because if i put it under here
and it's going to
level in this direction it's going to
push the button upwards a tiny little
bit so i'm probably going to go down a
tiny little bit deeper and then let's
see how it works out let's lock it once
again but i'm so glad it worked the
first time around and now let's take a
bit more off
i'm honestly surprised about the results
so what i noticed is i have a very nice
flat surface right now it feels pretty
good no sanding needed anymore and this
over the whole piece and even though i'm
not um
parallel to the crown so we got a
little deep line here going downwards
the
result is pretty damn good and also my
planner didn't cut into the workpiece
which is also really good so i didn't
get any kind of hube schleck it's called
in german
if i find the right english word it's
going to be here i'm also going to play
in the other side now and let's see how
that works out with a little deeper cut
this right here is spruce wood right now
so it's very soft wood we are going to
try it out on harder wood in a second
this is beautiful seriously this is so
much fun it's so much fun to just watch
how it goes through and
yeah just
all the wood coming out on the other
side it's such a
pleasure to work with this thing it's
amazing it's so cool and the surface is
so damn smooth
what a very nice instrument to work with
let's try it out on harder wood for
example mahogany just ridiculous
seriously this is crazy i should have
bought one earlier this is just so good
now for my projects on stemmer tu i'm
using a lot of mahogany wood and when i
receive it from the manufacturer it
actually has those saw marks
over it all over the place which is not
a problem at all i can use the random
orbital sander for example to get rid of
it but it's still a mess and it takes a
while to get off let's see how it works
out on the thickness planner and don't
forget always go with the crane never
against the crane i'm pretty certain
that the world is going to explode if i
go against the grain
let's see if it works out if i take off
just a tiny little bit at first
not too shabby actually most of the
stuff on this side actually came off and
now we are only left with this side
let's yeah let's just let it run one
more time through the planner and let's
see how it pans out overall
[Music]
i am so damn fond of this machine
seriously this
saved me like i don't know 10 minutes of
sending which is crazy just two passages
through the thickness planner and i'm
already done this is so good and and
just overall it looks freaking fantastic
just take a look at this result took off
everything and yeah just wonderful and
the surface is so nice and smooth
i don't want to live without this thing
anymore it's so amazing let's try with a
different kind of wood for example
cherry wood so that's a completely
different kind of situation right now so
this right here is the cherry wood and
my cnc actually messed it up this was
the first time trying to mill through
cherry wood and you can see um it got
stuck inside of the stock and then just
took a detour on the outside i'm now
going to try to plane off as much as i
can such that i can reuse this wood for
my projects yeah let's try it out
holy moly
not a problem at all
most of the things actually came off
this is really amazing and i can reuse
it now safely not a problem at all
whatsoever i love this thing oh so good
last three tests i want to see how it
performs on really hard wood like the
beach board i would also love to see how
it performs on stuff like purple heart
one of the hardest wood types out there
but beach should do it for now and also
i want to see how it handles fin stock
if it's going to break the thin stalk or
if it's going to come out nicely on the
other side let's try it out
using a different piece of beach right
now because this other one was too long
for the machine to handle okay you can
only fit about 30 centimeters into here
but this was longer if i wanted to go
with the crane so i'm using this one
that actually experienced some kickback
on
on the table saw that was so exciting
that was my first kickback ever and it
was terrifying let's go
[Music]
was a tiny bit terrified of the noise it
made but i think this just comes
naturally
considering the fact that this is really
hard wood and we took off two
millimeters at a time but not a problem
at all for this machine it did a
wonderful job
once again the machine didn't really cut
into the wood whatsoever it handled the
small parts too what a wonderful machine
definitely worth it 600 euros i think
now for the first piece of finstock
once again spruce wood
it was to be expected no problem
whatsoever and this concludes my tiny
little review and also first use of the
mitabu dh330 thickness planner and i
have to say
this thing is the most satisfying
machine i have lying around in my shop
up until this point it's it's just so
amazing to work with it's such a stable
construction i can even put it here
without it being screwed to my
workspace right now nothing really
happened it really didn't move
whatsoever it's so stable it's
just amazing and it's doing a wonderful
job the machine is not cutting into the
wood which is just pretty amazing even
on this tiny little gradient that we got
right here um other than that it was
about 600 euros which is about
750 dollars it's pretty it's a bit of an
expensive machine definitely not a
machine that everyone who starts out
with woodworking can afford but if you
are able to afford a machine like this
definitely go for this one i don't have
any other experiences with other
fitness planners up until this point but
i can say for certain at this point that
this thing is definitely going to be
worth its money does a wonderful job and
that's so satisfying to use i just want
to take wood right now and just put it
through the machine because it's so much
fun
you can find a link to the machine down
there in the description somewhere maybe
it's available on amazon.com for example
but it's definitely available in germany
so i'm going to link this one too other
than that i think guys watching if you
want to support the channel then
definitely make sure to subscribe to the
channel too and to get yourself a
fitness planner as soon as you can so
damn satisfying i'm now going to put
wood through it just for fun and always
remember never go against the grey
always go with the crane have a great
one and have a flammable day please stay
safe ciao
you