Today I show you quite a few hand tools which are about 80 years old. Once the property of an old woodworker who passed away a decade ago, a lot of old hand planes, chisels, gouges and clamps made it into my inventory! Even better than that: I finally grabbed an old casted iron jointer which is also from the 50s and try this monster of a machine with 41cm of cutting capacity out. Last but not least I finally solve my glue up problems by managing my cold shop in the winter and equipping it with an electric, climate controlled heater :) Enjoy the new episode! =D
Good morning, fellow woodworkers.
Welcome back to the workshop vlog. Um, I
think the lighting is rather it's it's
rather not so good. Never mind. And
we're going to go outside in a second
because um a colleague of mine at my
school um bought a house a while ago and
next to the house on the same property
there was an old um yeah carpenters
shop. Thing is when he first bought the
property it was still there. It was
still totally fine. But then a few
months later everything broke down. the
whole building collapsed onto well um
the whole carpentry which is not too
good but he was able to rescue some of
the hand tools and the like and he gave
me some of these to restore them over
time and so on. This is the first thing
we are going to do. We're going to take
everything out of my um of my trunk and
we are going to take a look at all of
these tools. Let's
go. Those right here are all of the old
tools. Um I'm going to bring them to the
inside um of my shop. This part right
here on the left hand side, this is not
something that I want. Those are tools
that I will go to the school um at some
point in in time once I can go there on
Wednesday, I suppose. And other than
that, this section right here is mine.
You can see I got a bunch of old hand
planers and the like. I got a lot of
very old clamps um which are still very
good to go and pretty excited about
these tools. I literally have no idea
what this right here is. At first I
thought it was for creating threats, but
it's not. Um yeah, let's bring them
inside and let's get a better
overview. That one's nice. I really like
that one. I hope I can restore it
somehow. And those are amazing. Those
are amazing. Oh, I always wanted one of
these, but I couldn't find any uh of
these currently because those of us are
pretty much sold out here in Germany and
they are expensive as
[Applause]
That one was huge. What the hell? What a
huge insect. That one startled
me. Perfect. There are some really fine
things in here and I hope I can still
get some good use out of them. As
mentioned before, a lot of old clamps.
Those are clamps for glue up. Um, yeah,
very old ones, but they are still going
to do a good job for easy glue ups. Um,
I got a bunch of different sizes here,
so those are going to be really useful.
Other than that, a bunch of hand tools,
lot of chisels like these ones. I
haven't found any of these before or
seen any of these before commercially,
but um, they look rather Japanese, so
they remind me of the Japanese ones. Um,
but yeah, you can chis away a bunch of
stuff with these, I suppose. I'm excited
about these. And also I got some very
fine turning tools. Um this right here
is yeah. Okay. Um I hope you can see the
curvature here. And this is like a
miniature one for very fine detailed
work. And I got two um yeah two no three
of these. Three of these. Also we got
these chisels. Those chisels are very
good for creating dove tails if I'm not
mistaken and taking out a lot of um
stock at a time. So, I got and this is
important chisels. Also, I got those
drills. Um, they look rather like snake
ones. Okay, like those snake drill bits.
And also, I grabbed one of these because
I didn't have that size before. And
those tip point um bits for drilling. I
think this is what I still don't know
what these are. What are those?
So, it says sprocket wheel, but I
literally have no idea what a sprocket
wheel is. and what it's used for. Um,
does look like these. I have no idea
literally, but I'm going to take them
for now because why not? Um, other than
that, all of planes like this one right
here. This huge one. You can use it to
flatten stock. And I hope I can still
get some use out of it. Oh, there's
there's a spider web trapped in here.
That is nice. Oh, yeah. This one
definitely needs a lot of restoration,
but I'm going to try to restore it at
some point in time. It's still pretty
squared on here. At least it feels like
it. But I got a bunch of wormholes all
over the place. Can you see those
wormholes? Yeah. Bit of work needs um
needs to be taken on this tour. But I
think I can manage. Also, we got this
traditional plane right here. Okay. Um
Oh, this feels very
handmade. This is a weird
feel. Oh, I think he was left-handed.
Yeah, I think the carpenter was
left-handed because this feels only
right for the left hand. For the right
hand, it feels rather off. You should
grab it like this. But h I'm not
certain, but um yeah, this is rather
interesting. And I'm really glad about
these. I got two red planes. Yeah. Um I
didn't have any of these before and they
are expensive Sri. And those are some
very nice ones. They look like he
created themself. That is amazing. And
also I got a little hand plane. That is
cool. That is really cool. I don't have
a small hand plane at the moment and
there's a lot of rust here, but um it's
still okay. It it still feels very solid
and everything and I can still screw it
and track the knife around and the like.
I wanted one of these for a while and
this one right here is going to be so
huge. Okay, I can't wait to use it.
Also, I received this one. Um that's a
rather fat boy. I have not seen one of
these before, but it's very solid. It's
extremely heavy. Um
yeah, haven't seen one of this form
before. That is curious. But um I hope I
can get some use out of it just like the
other one. And also those are great.
Okay, those are some very very great
planes and you can remove bark with them
and also use them on edge parts of
stock. Okay. And you can track them all
and forwards. They are amazing. I
actually purchased a used one a few days
ago over eBay, too. Um, can't wait to
receive it. Other than that, there's not
much more. I also got this one right
here. This very quality level. And this
one right here is made from casted iron.
So, yeah, it's probably super super
square. Yeah, this concludes all the
tools that I got here and they are
amazing. I can't wait to restore them
and use them. Other than that, there's
something you probably have seen over
there. And this brings me to the next
point of the workshop
vlog.
Namely, I am currently producing things
or I started producing um things for my
very first art market. It's a TR here in
Germany and I'm going to sell my own
products there under the condition that
I'm going to get approved for this one.
Due to Rona Chan, we still don't know if
I can take part, but if I can, I want to
have a lot of products available. And
this what I'm doing at the moment. I'm
working on coasters, things you can put
your pot onto, um, like these ones right
here. Okay. A wavy pattern, very, very
fishes shop. Um, and also a lot of
cutting boards and turn things. So, I'm
just going to try to produce as many
things as humanly possible up until end
of April. And then I hope I can sell a
lot of stuff. And this is what the rest
of the workshop vlog is about. Watch me
create things for the art market.
Enjoy. Oh, I
must just now grab something from
McDonald's from the McDonald's breakfast
and I'm on my way to grab myself.
Finally, finally a joint. I seriously
can't wait. Um it's made from casted
iron. It's something out of the um 60s
or the like. So, it's a very old German
machine, but it's going to do such a
freaking great job. 41 cm of um
basically cutting um diameter, you can
say. Um and it's it's just freaking
amazing. I can't wait to get it um put
it into my shop today and try it out
because now for the art market, I can
use a joiner very much to get boards
flat and the like. So, yeah, stay tuned.
Yay. We were able to move it. This
absolute unit of a machine. Holy I
was so afraid we couldn't get it off the
truck, but we did. And now it it's it's
here. And I need to move it there. This
is going to mark the position for the
planer. Holy That's a huge
freaking boy. Oh, I love it already.
Woo.
It's the wrong direction. How am I
supposed to turn it? Gosh.
I mean, it's in some kind position now.
Um, and now I Yeah, it's definitely
better.
Yeah, that looks great as a first just
as I imagined. I'm going to leave it on
the pallet for now because
um yes, just because yes, I have no idea
how to get it um down there. Okay, from
from the pallet down to the floor. I
really don't care if I need to transport
it around the shop. It's okay if it's on
a pallet already. Yeah, that's amazing.
And I still have a lot of space for my
sliding tables or I have no idea um if
this is still the proper position that I
used at the very beginning.
Um, but it sure does look promising as
far as I'm concerned at the moment. So,
yeah, I'm going to leave it like this. I
can always move it around if it's not.
Yeah. Okay, perfect. Um, let's plug it
in and let's try it out, shall we? But
before we get into joining, here's
something that a lot of people struggle
with a workshop in the
winter. Here's my solution. This right
here is just a simple electric heater,
but with the advantage that it can
actually be set to a certain temperature
on an echo mode. Meaning, I can turn it
on to, let's say, 20° C or 15. Now,
totally enough explanation in a second.
Then once it's on 50°, it's going to
turn off. And once the temperature falls
under certain threshold, it's going to
turn on once again up until we have 15°
C. Once again, why is 50° C totally
okay? Well, in a workshop, all that
really matters for me is that um well,
my my glue is going to dry. Okay, be it
the CA glue or especially the wood glue.
Typon 3 needs at least 7° C for it to
cure properly. And I don't have that in
in the winter. Meaning, I'm going to put
this heater right here into the room
next door for now. This one right there
is going to be the 15° Celsius control
temperature room where I'm going to put
epoxy in glue ups etc. And then I should
be safe even in the winter. Let's
assemble it really quick. There's not
much to it. I just need to screw in the
the rollers and then we are going to put
it in there. And in about an hour or
something um after we try out the
joiner, I can see if the temperature is
nice in there. So yeah, let's get
started. Let's take this off real
quick.
[Music]
As mentioned numerous times before, this
is going to be the future CNC room at
some point. At the moment, it's the
pallet room because there are so many
pallets in here. And I can surely, since
it's a a small room, use it as a CNC um
as a drying room for now. So, yeah, this
is going to be his job. Um, I'm going to
use the Snap Maker case right here as a
table for now. And we're going to turn
it on. Then we're going to see if it
works pretty good as I do. Um, what is
this? Oh, yeah. I got you. Okay. I got
my um my little remote here. Let's plug
this built
in. Okay.
Let's set the temperature up to yeah 23°
C. And I'm going to change the
mode to
echo. And now it should start um
automatically. You see it? 23° C. Maybe
you can see it from up there. And yeah,
now I'm just going to play the waiting
game. I can already feel it getting a
bit warmer. No, I don't want to set up
in time. No. Stop. Okay, awesome. Uh,
see you in an hour or something and then
let's see if it's nice and warm in here.
I'm
here. Camera is a bit um is a bit
twisted, a bit um on a gradient, but I
left the camera in here to film my my
reaction. And it's really warm in here.
It's absolutely amazing. I love it next
to the radiator. It's awesome. How is it
about here? Even in the last corner,
it's an amazing temperature. It's just
ridiculously good. I love it. I can't
wait to do glue ups in here. That is
awesome. That is absolutely awesome. It
works wonderful. And I'm going to see
how it works out when I let it run
overnight in the hopes that the whole
place is not going to burn down. Um,
yeah, it's it's awesome. I should have
done this way earlier. This would have
made the winter way easier for me in
terms of glue ups.
Okay, so I wasn't able to try out the
joiner before. So the most important
question is, will it work? It's going to
be a bummer if it doesn't work. And
those are all D air machines. They're
going to be seriously loud. They are
going to be so freaking powerful. Um,
yeah, it doesn't get in the way of the
plate guard. Let's see.
So yeah, so there are two
things. It turns the wrong direction. It
spins the wrong direction. Meaning I
need to change the face on the um on the
cable. H and also it's rather rusty it
seems. So yeah, this was like the noise
I suppose that we were able to hear. So
at first let's
change the face. Um I think I need to do
it on the other one. Yeah, let's see. If
I'm not mistaken, I need to change
it on this
end kind
of
help. Well, that's a bummer. I think
this ends it for today and I'm going to
see you in a few seconds when it's
tomorrow or something. Um, this is one
of the shitty ones where I can just take
a screwdriver and well, change the face
of the um, alternating current. So, this
doesn't work. Um, I'm waiting for my
electrician to arrive tomorrow. He's
going to fix it for me. He's a very nice
guy, one of my landlords, basically. And
yeah, going to see you in a second. And
then we're going to try this bit
out.
[Applause]
Heat
up
[Music]
here.
[Music]
[Applause]
[Music]
Heat. Heat.
Yeah. What is this here?