Today we review the brand new Wizmaker L1 laser engraver and cutter and see how such a machine can be useful in your garden! :D Enjoy! =D
Official Features: ①. Ideal for beginners in laser engraving, our machine is easy to install and has high playability. ②. With a carving power of 36W, your cutting and engraving speed will be faster. ③. Color engraving capabilities. ④. Sturdy construction with full steel wheel hub, shaft, and enclosed synchronous belt. ⑤. Compatible with various engraving software, it is convenient to use while offering diverse functions.
0:00 Preparing the Main Planting Bed 1:25 Unboxing 4:17 Assembly 8:37 First Test Engraving on Plywood 16:51 Engraving Laminate Flooring 18:15 Engraving Bamboo 21:09 Cutting 4mm Plywood 22:49 Cutting 5mm Bamboo 25:09 Cutting 8mm MDF 27:19 An Application in Gardening! 30:45 The Ultimate Test - Cutting 10mm Hard Maple 32:35 Final Verdict
Good morning fellow gardeners. W come
back to another episode.
I really like this little detail. That's
a different color um in comparison to
most other cables that you get with
those laser encra or machines in
general.
That was rather quick. If it wasn't for
this little over here and also
this screw thing that I got here, um it
would have
gone quicker. About 15 minutes. And I
think that's one of the fastest
um assemblies I ever had with a laser
engraver. Oh, so those are spare parts.
So that is good. So it really doesn't
matter with this screw. So that was a
spare part. That is nice. Um I don't
need to worry about that. And now we can
get into engraving and also lasering.
And I'm going to do this with light
burn. Let me set up a bunch of things.
And then I'm going to see you in my
garage because I can go to my wood shop
at the moment. And I need this laser
engraver and cutter here on my property
because it's for my garden and various
other tasks that I would like to do
around the house. So let's go.
So, as you can hear, the machine is kind
of loud, but it figures it's a stronger
laser. And the cable that came with it
is rather short, so it's only about 50
cm. So, I need to have my laptop
extremely nearby to actually connect it.
So, the first test is just going to be
an engraving. And it really doesn't
matter what I'm going to engrave. I'm
just going to put that into here.
And then in Lightroom, I'm just going to
set up a simple
engraving. And I'm going to do
it
very
quickly. So, let us do 300 mm/ second.
And I'm going to see how it pans out
with a power maximum of
[Applause]
[Applause]
40. So the homing
[Applause]
worked. Oh wait.
[Applause]
Um
and that also works in light burn. So
let
us try it out.
[Music]
It's doing something most definitely. I
can see the
laser. And the laser protection seems to
be kind of
good. And we see if that's too much, if
I should up the maximum power or
something of the sort. We'll see about
all of that. Let's try it out.
300 is probably way too much with the
settings that I have right
now. Yep, nothing's happening. But
that's not a
problem. Okay, let us go with a maximum
of 100. So, we are going to ramp it up
completely
and with a speed of one, no, with 250,
no 200, 200 mm/ second.
And let's see if it's
better. Oh yeah. So I can see an
engraving that's most definitely there
now. And it's a very shallow engraving
what I got here. Yeah, that is looking
good.
[Music]
[Applause]
This is the most curious thing I have
seen in a
while. Everything is set up properly by
the machine standards upon LightBurn.
But for some
reason, the image has been engraved
inverted. So the workspace is turned
around by 180°, which is kind of weird.
But this doesn't matter for my purposes
because thin craving turned out
fabulously. Let me show you. Very dark
image. Um, it had white shader at the
back, but it looks really good. Look at
that. It captured all the shadows and
the depth of the shadows perfectly. And
I think that's a great engraving. Um,
and it's a shallow engraving at No, it's
actually not not too shallow. Okay,
that's a very good engraving. I like
that. And it was very quickly done.
Let's do another
one. This time we are going to do a
grayscale engraving of my logo from Flex
Wood. And it's going to be a high
quality engraving like a lot of pixels,
a lot of DPI. And since everything is
inverted, I have to put it to
the completely wrong
side. Oh, what? Wait a minute.
[Applause]
I got to hold the machine. Dragging it
around is confusing it. It's not like
the other lasers that I had before.
Okay, let us see. That should be better,
I suppose. Yeah, that is way better.
Okay, perfect.
Um, and now we can go ahead and get
started. This time only 100
mm/s or let's do No, no, let us go with
200 once again. And max of 100. Let's
go. Let's see if it works out and how it
works out. Grayscale is an engraving
type
that gives us a lot of detail because it
captures nearly every pixel of the
original image. So, the laser has to go
through a lot of
work. Let's see how it turns out. I can
see a lot of smoke going on, but maybe
it's too quick. We'll see about that.
The engraving here is pretty deep, but
over here I can't really read the
letters. And it's also inverted.
Everything is
inverted. That is weird. I need to fix
that. Let me Google really
quick. But no matter that, before we get
to that, I'm going to Google in the
meantime. And I want to see a
sideby-side comparison when I dial down
the the speed to 100
mm/s. I'm going to put it over here and
then we're going to give it another
shot. Oh my god. Yeah, that is that's
more like it. That's definitely more
like
it. And I could actually connect the
engraver by Wi-Fi. I now see that on my
laptop. That is
great. Holy moly. If I die down, we get
so much more depth and so much more
smoke. Holy
[Applause]
And now that we have so much
smoke, we run into the problem that we
get a bit of
um smoke bleed, you could say.
Um, but I could use an air assist, but
this is not something that I um want to
pose negatively about this machine
because I could just use my air assist
and then everything would be fine. So
that's not a problem at all. Said about
the quality right now of the laser
engraving that we get. I don't want to
sell the things that we do right here at
the moment. I just want to see how it
turns out
overall. Okay, let us check. Obviously,
as mentioned previously, the engraving
is inverted for some reason, but I think
I found the issue. Um, other than that,
the engraving here is the one with 100
mm/s. And you can see way more depth,
way more depth of everything, of color
and the like. And if I wanted it to be
even more darker in some kind of way,
more contrasty, then I could just set it
up in LightBurn. So, I think 80 to 100
mm/s on plywood is definitely the way to
go with a power range from 0 to 100.
This right here is just not good enough.
This is just not good. Um, but for
things like these, it actually worked
out. Now, I want to try an engraving on
not plywood, but a laminated floor and
also on some kind of hardwood. I have
bamboo lying around. So, let's give
let's give this a shot next and let's
see how it turns out. Then we get to
cutting, which is the most important
part for
me. This time it seems to be the right
way around. So that's good, I
suppose. This is looking fantastic,
mate. Oh my goodness.
Nice. Okay, let's see how it turned out.
That's most definitely a piece of
furniture or a piece of flooring I would
love to have in my
house. Oh my god, this is outright
amazing. Look at him. Ah, the detail.
Look in his eyes. Yeah. So, why did I
choose laminate flooring for trying
something out like that? Because
laminate flooring is laminated with
mostly a piece of some kind of um
plastic, you could say. So, what that
means is it's melting basically into the
top and it did a pretty good job. Now,
see, after scraping some of that off,
the excess, it looks even better now.
That is great. That's something I can
get behind and I really like that it did
a very good job with laminate flooring,
which is which is good, which is a good
indicator for a diode laser doing a good
job. So, that is very nice. Now let us
try hardwood and then after the
engraving we are going to get to the
cutting side of
things. This is a bamboo
board. Um which is really really
hard. Um so definitely
something that is not to be toyed
[Music]
with. This time I'm going to use this
board to hold it down.
[Applause]
those. Okay,
perfect. Let's see how it works out.
[Music]
[Music]
Okay, done. Let us see. I have
chosen this material on
purpose for one specific reason. Namely,
bamboo is not like regular wood because
bamboo is a grass and this grass needs
to be glued together heavily. Meaning
engraving something like this is really
hard. It's it's it's harder than
engraving acrylic and the like. Not
because something melts, just because
there are no fibers to really um get the
engraving nice to to burn. So what you
are burning here is it's like a concrete
surface, you could say. It's extremely
hard. And the engraving in and of
itself, even though I use 100% power on
the darker passes, is not too deep. But
this is not something that I want. A
shallow engraving on a material like
this is perfect. And it did a really
good job with that even on 100
mm/s. Let me show you. Like look at
that. It looks really good. Obviously,
with a material like this, you can't
capture all of the contrast shadow parts
that you normally would because the
laser reach um isn't that high to like
engrave a more shallow engraving than
the one that is already really dark in
in the background. But it did a really
good job with this little toy kit that
we did at the start, too. And I'm very
satisfied with the performance. This was
really good. This is like a good
indicator if it works nicely. And now
here come the ultimate test, namely
cutting. We are going to start slow with
the 4 mm plywood and then we are going
to work our way up all the way to a 1 cm
um raw maple board scrap piece that I
still have lying around. So hardwood is
the most important thing that I would
like to engrave and also cut. So this is
the main focus that we are going to be
taking a look at
today. The specifics of what we cut
really do not matter. All I want to know
is how fast I can cut which material.
plywood 4 mm with 50 mm per second. This
is way too much. I can see that this is
not working out. But let's
[Applause]
see. All right. Obviously, it did not
cut through. Why should
it? Let us offset this a little bit
more. And we are going to just
um lower this by 20. So, 30 mm/s still
going to be way too quick. But we'll see
about
[Applause]
that. It's a 20 W laser overall, so it
ought to cut through it rather easily at
some point. At
least 10 mm/s. We are getting into the
um into the realms of possibility. I
think yep, it's cutting through. I can
already see it. I can see the blue U of
the laser
here. Yeah, that was
good. Oh my
goodness. So much
smoke. We most definitely went
through. Yeah, got it. But we barely
made it. So 10 mm/s on 4 millimeter
plywood is kind of okay. You should
probably go with eight or nine to get
results which are
repeatable. All right. For bamboo, I'm
going with 5 mm per second, but I don't
think we will make it. It's bigger and
it's way harder as mentioned before.
Let's
see. Oh my
goodness. It does go through it seems.
[Applause]
But due to the smoke, we get a lot of
defraction of the
laser or reflection of the laser beam.
Let's see how it worked
out. I can feel it. It went a bit
through. If I were to do it, Can you see
it? If I were to do a second pass, oh my
god, it's pretty warm. A second pass or
even slower, then we should be good. And
using an air resist,
it should work out nicely. Let us do it
a bit
slower. 2 mm/
second. Let's
go. I hope it's
not too slow. I don't want anything to
burn.
All right. So, we got a lot of
burn. We were too slow
and it was most definitely out of focus.
So, we didn't make it through. Another
one. 5 mm per
second with two passes. We'll see how
that turns out.
I can still not make it through
completely. But it's not the laser to
plane. It's the material. It's just a
very hot material to work with. And I do
not believe that most 20 W lasers would
be able to get through this or no 20 W
laser at all. My 10 watt didn't make it.
So, I think you need about 30 to 40 W to
make it through a material like this,
especially in one pass. So, it's not a
problem. The engraving was nice. I
wouldn't cut a material like this with a
laser like this at all. So, yeah, all is
good on that
behalf. So, now I'm especially curious
about the laminate flooring, how we will
be able to make it through, if at all.
So, I'm going to go with um 5 mm/ second
once again in one pass. We'll see about
[Music]
that. No, we don't make it through. I
can already see
that. Not even
close. Two pes 3
mm/s. Let's go.
[Applause]
Oh, we are making it
through. But will it cut through in such
a way that we can push it out of
laminate flooring? I'm curious about
that. That's 8 mm, by the way.
Yep, it made it through completely, I
think. I mean, obviously it's a total
mess. So, we got mortal plastic. We got
a lot of wood glue due to the NDF plate,
but
disgusting. It seems like we made it
through
completely. Yeah, we made it through. I
mean, it's molten together once again on
the backside due to the plastic, but we
made it. Look at that. That's a pretty
thick and very hot piece. Yeah, that is
great. I think I don't know why you
would want to cut laminate flooring, but
this is already a test um on how you
could, for example, um cut laminated MDF
boards because ultimately this is what
it is. And many people are interested in
cutting MDF using lasers to create
templates, for example. So, I think that
checks out. And with a bit of fiddling
around with the settings, you could even
get 1 cm to be cut through on an MDF
board. So, I considered this a success
on the first try, I think. And now, here
comes the most important thing that has
to do with the selfsufficient
series. This right here is a bit of
duckless fur. I cut this um
into I think 4 mm wide pieces um which
are 6 mm thick and we are going to turn
those into little um signs that we can
plug into the soil. Those
are things that you can sell very nicely
to all people for example on an art
market because I for myself um plant a
lot of things obviously but my wife is
not too into gardening. So if I tell her
please get me some um rosemary out of
the garden she probably doesn't know
what it is um on the first site for for
example so she can't identify the plant
when she just sees it. though. This is
why I'm going to create some of those
plant signs and I'm going to shove those
to each and every plant into the soil.
It makes the garden look absolutely
fantastic. And on the other hand, my
wife knows where everything is. And this
one.
Now, the ultimate test for everyone
wondering, can we make it through 1 cm
thick hard maple? Let's go.
So those settings didn't quite cut it
literally. So we didn't even make it to
the other side. But bit
slower. And maybe we can make it. Let's
make it 2 mm/ second. Two
passes. Oh, I can already see the laser
sheath. It makes it through in one pass.
That is surprising.
I'm stoked about that. Why does that
work? Yep, it totally went through.
Can't believe it. That is actually
really surprising. I
think I honestly did not think that this
was in the realm of possibility.
next few episodes on the self-sufficient
series and I'm wishing you guys a
flammable day and please stay safe and
please stay alive such that you can
watch my next few videos in the series.
See you.