How to make DIY Ollas: Self-Watering Systems for Plants

Terrace garden
104 followers
In a couple of weeks time I'm going on holiday for a month. That's right, I'm a
gardener going on holiday in the middle of the summer. I know it's insane but I
have a house sitter and she's going to be looking after the house and looking
after the cats and looking after my plants but I'm still a little bit
concerned. What if she forgets to water something, especially my tomatoes? I
really want to have some fruit when I come back in August. So I've come up with
a DIY solution. I've made my own Oya's. Now if you haven't heard of an Oya
before, they're basically terracotta vessels that you fill with water and
then you bury them into the ground. The plants that surround the Oya will
actually attach their roots to the sides of the vessel and draw water through the
terracotta and up and up and into the plants. So it's a great solution for
really dry climates and also maybe greenhouses that might not get enough
water. Now if you buy them purpose-made, they're beautiful items but they'll set
you back 30 pounds a piece, more even. So I have an idea and I have basically
access to terracotta pots which is the same material. So you need unglazed
terracotta and I figured out a way to make Oya's using just this, the vase it
comes along with, and a little bit of white tack. And I'd like to show you how
to do it too. Now this project is super super easy. All you need to do is take
some blue tack. It's also called mounting putty or in my case it's a generic white
putty. And you take a little bit, you put it on the inside of your terracotta pot
and you smush the edges around to make a tight seal. Then you flip it over and
you do the same thing on the other side. It's my opinion that if you have it on
both sides it's gonna hold the water a lot better. Next, bury the pot in the soil
near the plants you're trying to give extra water to. Bury it all the way up to
the rim and then fill it completely with water. It's actually quite cool this
project because the wide top of the pot makes it really easy for you to water
with a watering can. Then after this, grab the base that you bought along with the
pot, put it over the top, and you're sorted. The oil has been out overnight
and it's holding the water really well. So whenever I need to refill it, I can
easily take the lid off, pour water in, and it's set. Now with this design you
can take that white tack out at any time and reuse it as a plant pot. But if you
want to make a more permanent solution, I have a second way to make your own
olla. Now this second way is a little bit more time-intensive and you start it off
in the same way. So you attach that same putty to the bottom of your pot and
probably set it down on something like paper or cardboard so that the cement
that we pour inside won't come through. That's right, cement. To mix it, it's one
part of the cement and two parts sand and then you mix it with enough water
just to make it moist. You don't need it really that sloppy. Stir it around with a
stick or whatever implement you have. It'll be kind of a rough wet sand
mixture. Afterwards, just spoon it or get it into the pot however you can. It's
quite thick. If it is quite wet, don't worry about it. It will dry
eventually. Shake your pot to settle it as best you can and in the very end you
want to compress that concrete to make it as flat as possible. So I'm using a
vinyl glove but you can use whatever you need to and just look at the moisture
already coming out of the pot. Just that little bit of water. So after waiting 24
hours, your cement is completely hardened and it's it's non-toxic. You don't have
to worry about it affecting your plants at all and this will last for ages. It is
a permanent solution though so this is a permanent Oya now and just bury it
like you did the other one into the soil around, fill it with water, put the lid on
and you're set and your plants are going to be drawing that water out
continuously and you don't need to really water the soil anymore because
their roots will find that moisture source and latch on to it. If you enjoyed
this video, please give me a thumbs up and don't forget to subscribe if you
haven't done so already. I release new videos every Friday on gardening, my
allotment garden, my bees and DIY projects. Thanks so much for watching
this time and I'll see you next week.
