Spencer walks you through every detail of our fully loaded custom chassis setup— basically a complete truck in a box. This murdered-out build is heading to our customer Eric and it's hands down the nicest chassis we offer.
We build about 50 of these a year for classic Ford trucks (F100, F150, F250), classic Chevy trucks (C10, C20, K10), and early Broncos. Whether you've got a fat fender, bumpside, dentside, or OBS truck— we got you covered.
Full Specs on This '67-72 F100 Chassis:
Gen 3 Coyote 5.0L with 3L Whipple supercharger (780hp at the crank, 600hp to the wheels) 10R80 10-speed automatic transmission Acuair E-LE Plus airbag suspension (controllable via phone app) Porterbuilt TIG-welded frame powder coated black Wilwood 14" disc brakes front and rear (6-piston front, 4-piston rear) Currie 9" rear axle with 35-spline chromoly axles, 3.73 gear ratio FFG stainless steel headers and 3" exhaust with Magnaflow mufflers Boyd Welding 22-gallon aluminum fuel tank Aluminum two-piece driveshaft with carrier bearing GT500 fuel pump with returnless fuel system Dual battery setup accessible through bed Raised bed floor kit included
This setup comes with Ford's 2-year/25,000-mile warranty on the crate motor and gets 18-22mpg. Everything is modular and bolt-on, so you can service or upgrade components down the road. Drives like a Bentley, performs like a race truck.
Chassis fits 1967-72 F100 shortbed trucks. Build time is about 12 weeks for the Porterbuilt frame, then we handle the full assembly in-house.
Want a custom chassis for your classic truck? 📧 [email protected] 📞 480-621-6072 🌐 fatfender.com/chassis
We build custom chassis for Ford F100, F150, F250, Bronco, Chevy C10, C20, GMC, and more. Fat fenders, bumpsides, dentsides, OBS— hit us up.
Make sure to follow us on Instagram, Tiktok, and Facebook to see the behind-the-scenes on our truck builds, chassis projects, and new parts, and subscribe to our channel and hit the little bell icon so you don't miss a video. Thanks for watching.
Check out our site for hundreds of quality and custom products for classic trucks. Ford, Chevy, GMC, and even Dodge. www.fatfender.com
Feel free to shoot us an email if you have any questions at [email protected].
Sitting in front of me is what we like to call the fully loaded chassis. Gen 3 Illuminator
Coyote about 780 horsepower at the crank. Now, this is an airbag chassis. So, you got your 3
liter Whipple supercharger, Magnaflow mufflers, and aluminum drive shaft like a Bentley. They
float on the road. This is a spared no expense setup. It's basically a truck in a box. Hey,
my name is Spencer. I'm here with FatFinner Garage. We're out here in Nashville, Tennessee
at the Super Speedway at the Triple Count Crown of Rodding. Sitting in front of me is what we like
to call the fully loaded chassis. In our opinion, it's the nicest chassis on planet Earth. And we've
accounted for basically everything that you, as a builder or a consumer, would ever need to account
for to get into the frame here. This is what we brought with us. So, this is for a 1969 Ford F100
two-wheel drive. It's for a shortbed truck. Uh, this is a really cool customer of ours named Eric,
and he had us build this full package for him. We probably build a good 50 of these a year,
and it's exactly like what it looks like. It's basically a truck in a box. And all you really
as a have to worry about as a consumer is putting the truck on the frame. But anyways,
to get into the frame itself here, like I said, 1969 F100. This specific chassis will work for
all of your 1967 to 72 F100s. Frame itself is uh welded by our friends over at Porter Fabrication.
Uh they're located in our shop and they do all of the TIG welding on the chassis. So they that takes
them about 12 weeks. They give us the frame. From there, we'll send it out and get it powder coated
and then from there we do this entire assembly. To recap, you got your Gen 3 5 L Coyote uh with a
3 L Whipple supercharger on it. It's going to make about 780 horsepower at the crank or approximately
600 horsepower at the wheels. So, this is all a crate motor from Ford Performance. Comes
with a 2-year 25,000 mi warranty. It's a setup on independent front suspension. You got your front
control arms. Now, this is an airbag chassis, so this is sitting on front rear airbags. The idea is
you can lay frame um or basically drop all the way to the ground and then all the way up. So,
I have the app on my phone. And I'll kind of show you generally what that looks like. And we you can
control it on the controller in your truck or you can control it on your phone. So if I wanted to go
down, it's the wrong side. There. There it goes. Let's try that again. If I wanted to go down,
goes down. Goes lower, lower, lower. Our presets just weren't working very well. But you can set
the ride height that you want it to go at. But fully controllable just off of your phone or off
of the controller. But it's all airbags. Um I've been blessed enough to drive in several of our
air ride trucks and they perform like a Bentley. They float on the road. Then you have your 10R80
automatic 10-speed transmission. Very, very stout setup. It's a perfect application. It's
almost like you're driving an electric car because the shift points are so fluid that
getting from gear 1 to gear 10 is like an instant. Yeah. Going from that point, we have our stainless
headers. We do all the TIG welding here in house. And then stainless exhaust all the way back. 3-in
collectors and 3-in exhaust all the way back. On the exhaust, we run Magnaflow mufflers. The
Coyote are a high RPM motor. So, if you run a very loud exhaust, it might sound a little obnoxious
and give you a little bit of drone at idle. We go with Magnaflows and we do a little Xpipe back here
intentionally to kind of quiet the motor down. The idea is when you're in that 5 to 8,000 RPM range,
you're hitting those perfect high notes. This customer is a little extra. Shout out to Eric.
He wanted everything murdered out. So, normally a lot of this stuff, it's really only going to be
your Whipple that's black and the chassis could be powder coated black. In this customer's case, he
wanted the transmission, motor, headers, exhaust, fuel tank, air compressor, everything murdered
out. So, that's what we did for him. So, before we reassembled it, we had everything blacked out.
We put it all together. So, moving back in this direction here, you have your drive shaft. Uh,
this is going to be an aluminum drive shaft, and it's a two-piece with a carrier bearing.
And the idea there is to uh provides some flex uh when you're going to lower the truck, reduces
vibration, perfect setup. It allows you to put 800 horsepower at the crank and uh it's actually
going to use it correctly. Everything is in the factory location. Uh Ford offset everything an
inch and a half to the passenger side. We've done the exact same thing here. So the idea is if you
get a frame like this, the sheet metal will all go together like it was the original truck. Anyways,
coming back here, it's all on airbags. So this is the Acuare E-LE Plus setup. You have your V-air
compressors. Um and like I said, controllable by your phone controller in your truck. And
uh we plumbed all the airlines in a pretty cool way. This one's kind of set up for display. So,
there's some airlines that are visible, but for the most part, they're all tucked inside the frame
rail. It's very clean. It's very effective. But regardless, coming back here, we have a Curry 9-in
rear axle. It has 35 spline chromali axles. Um, we typically do a 373 gear ratio. It's a really good
balance between daily driving. If you want to step on it, it'll go even with the supercharger, you're
probably getting somewhere 18 to 22 m to the gallon. So, it's kind of like the get your cake
and eat it two combo. Going to the brakes. Shout out to our friends at Willwood. These have a 14-in
uh Willwood disc brakes front and rear. Six piston front, four piston rear. Set up for perfect daily
driving. If you wanted to do some light racing or tracking, it's totally capable. We have a
uh Boyd welding fuel tank. Uh they all aluminum weld these by hand. It's a 22gallon tank. You'll
get about 300 and so miles on a full tank of gas. So for the rear suspension, you're going to have
a rear forlink and uh you're going to have a Watts link assisting that as well. So very,
very responsive, very tight rear suspension. This whole thing is designed to go in a straight line,
which uh you need to if you're going to have this much horsepower. You have a raised bed floor kit,
too. So, for your bumpside trucks, if you were building a chassis like this,
we could set this up where literally, you know, exactly where you're going to raise your bed,
too. It's all going to sit nice where it needs to. We use a Mustang GT500 fuel pump. We also
run a returnless style fuel system. It's best for fuel efficiency. It's how Ford runs it on their
GT500 setups. You have your two battery trays back here. So, you'll put two Ford batteries in here,
and you'll be able to access them through the bed. you'll drop the tailgate and you'll access
them there. So, serviceability is a very big deal. Um, it's something not a lot of people
think about. Most of your components on this are modular. So, we built a chassis setup that our
goal is this will outlast the consumer. But, let's say, for example, in, you know, 20 years from now,
there's a new fangled motor that everyone likes better than the Coyote. Everything is modular.
Your motor mounts, this entire center section here is all bolt-on, your cab mounts. The idea
is if you want to adjust something, something doesn't fit quite right. We never want to put
you in a position where you're stuck with it. You have adjustability here. So, if somebody wanted
to change how they wanted to run their exhaust, if they wanted to change their motor and trans setup,
wanted to change their airride equipment, it's all bolt-on. It's all grade eight hardware. It's very,
very nice stuff. All the motor mounts, polyurethane bushings. So, this is a spared no
expense setup. Regardless, uh my name is Spencer. I'm here with Fat Garage. This is the ultimate
chassis. This is the best product on the market to date. Um, and we're just going to keep going. So,