Today we'll review the K15 Pro Laser Cutter and Engraver by Carverall. I'll try to provide you with an unbiased short-term review, so let us have a look, shall we?
0:00 Intro 0:06 Unboxing & Assembly 3:38 First Impression & Thoughts 8:04 Test 1 Plywood 9:24 Test 2 Mahogany 11:49 Test 3 Canary 14:00 Weekend Projects 17:42 Rotary Test 18:23 Test 7 Slate 18:55 Test 8 Steel & Infrared Module 21:11 Final Verdict and Rating
[Music]
Good morning fellow engineers.
Today we are going to unlock another
tool in the shop. It's a laser.
It's a pretty inexpensive laser. And I
want to see how it can perform. How you
can for a low price point get something
in your shop or at home, whatever you
do, is it a hobbyist thing or maybe even
a commercial thing for a pretty low and
affordable price. So, is this thing for
everyone? Can it do what most other
lasers can also do with a lower wattage?
We'll see. Let's unbox it.
Today we are going to take a look at the
Carver K15 Pro. It's a 10 watt laser
engraving and cutting device with a
pretty substantial cutting and engraving
area for a low price of about $300 if
I'm not mistaken. Here's the real price.
So, yeah, it's pretty affordable. Most
people could afford something like this.
And we are going to see if it can hold
up in regards to my needs in this wood
shop.
Now the first thing after unboxing is
obviously taking a look at all the parts
and seeing how we can assemble it. So
what I can already find is an air assist
and a honeycomb
pedal and they also sent me a
traditional rotary device such that we
can also engrave things like cups for
example.
What I also got is the laser module.
And this right here is the main
engraver. Comes in a pretty tiny
package.
We're going to see. Let's assemble it.
By far the most important thing for me
when it comes to those laser devices,
especially some that are more
inexpensive than others, is if they can
be assembled with all the things that I
have in here. So, do I need extra
screwdrivers or anything of that sort or
is it a standalone thing that you can
kind of buy anywhere in the world
without any further equipment and just
get started with? This is like the thing
where I measure um quality at when it
comes to those, let's be honest, Chinese
laser engraving devices. Chinese doesn't
mean that it's bad per se. It just means
that it has been produced more
inexpensive than other devices. And for
this purpose, we'll see if it can do
what other devices can do for a higher
price point.
So, that's already a pretty good start.
We got all the Allen keys in here.
Everything that we probably need. We
also got some bolts in here.
And now I'm going to quiet myself and
just assemble everything. I'm going to
use a stopwatch here and see how long
it's taken. Let's go.
Well, that was quick. only around 10
minutes, but just because I made a tiny
little mistake screwing this one in here
first because I had to
pull this little um belt right through a
little slot that we had here. So, that
was my mistake. Um I didn't read into
the instructions too carefully. So,
that's that's my bad. But other than
that, that is really cute. I mean, as
mentioned before, for price tag of
around €2 to300, depending on the one
that you um take, this right here has a
pretty substantial engraving area. And I
mean it when I say when I compare to my
first snap maker, okay, it was a free
module kind of thing. But this right
here has a way bigger working area. When
it comes to the working area, what we
are provided with is about 30 cm in uh
in this direction. Yeah. And what we
also have is about 20 cmters in this
direction. So 20 by 30 area which is
pretty good. This right here holds um up
for many many applications. And the cool
thing about those lasers which are open
at the bottom is you can take stuff
which is way longer actually and they
crave one after another. So you have a
lot of possibilities that you can work
with. Other than that what we are
working with right now is a 10 watt
laser module. This is on the lower side
of things. But when you consider this
right here is only on the price tag that
I told you about, it's totally fine for
10 watt laser engraver, this is pretty
cool. I can appreciate that. What I
really like about this one is kind of
like with the X21 on the X2 lasers, what
you get is a little flap that you can
flap down or the L1. Um, and then you
basically have your focus. What they did
is they put this lever right here. you
can level it down and then you can just
lower everything on your stock and then
you have the focus height that you need
for this very laser with this frequency.
Yeah, that's really nice. Um the only
thing I'm a bit worried about so while
assembling the thing I was worried about
um those axis getting out of sync um
because they were a bit wobbly. But when
I installed the coupling that we had
right here, everything worked out
nicely. So everything's stable. That
shouldn't be a problem. But what I'm
worrying about is if I do quicker in in
cravings, will it start to wobble
rapidly? And this could in some cases,
I don't know, mess something up. We'll
see about that. I'm not certain about
the razors right here. I'm going to uh
uninstall those for now because I don't
need those. Um I'm only going to try out
stock, which fits in my um area that we
have down here. If you want to use the
razors, you might also as well use a
little table that you can put down here.
But other than that, um, looks pretty
cool. The whole structure is made out of
aluminum. And also, we have some plastic
extrusions here or injection mold
plastic. Really doesn't matter. But
overall, it's it's pretty stable. Even
if I'm cheering for this price tag, it's
it's totally fine and acceptable, at
least in my book. We now try a bunch of
things out. we see how it performs. And
yeah, we are going to start off
traditionally with just a tiny bit of
plywood and they also conveniently
delivered some pieces of plywood with
the machine. So we are going to engrave
those and we are also going to try to
cut this. This looks like 3 to 4 mm of
plywood so that we are on the same page
already. This right here is 3 mm. So
let's try and cut it. If it can cut
through 3 mm, that's totally in the
range of the performance of a 10 watt
laser. Let's go ahead and get started.
Well, color me surprised. I have never
seen a honeycomb board that I was able
to screw into the base of my laser.
This is cool. I like that. I'm into that
That is awesome. What I also
really like are those magnetic stops
that you can put on the honeycomb board.
And it's actually pretty stable due to
the geometry of the honeycomb board. So
you can put it here and you have nice
restrictions for your wood to go into or
your stock, whatever it may be. Just
like this. That is cool. That is That is
nice. I can appreciate that.
That is cool. Now look at that. That
looks really clean. For this price tag,
I'm into that. I'm into that is the air
assist.
That's good. Now, let's home it once
again.
Hi. Yeah, there we go. And then let us
do our first project immediately.
All right, the engraving looks pretty
damn good.
Uh, I can't complain about that. Now,
let's take it off. And
oh,
it's a wo. Oh, nice. Wo, look at the
bag. Like, that is clean as
And that pops right out. That is cool.
Look at that. We also got the contrast
between the two wood types here on my
logo. You can also see the contours of
the rest. That is cool. That That is
really really cool. Um I seriously can't
complain about that. That looks pretty
damn solid.
Nice. For 3 mm wood, that that is good.
That is actually really good for a 10
watt laser module. I'm already kind of
convinced. I seriously can't complain
about that. That is really really damn
cool. Nice performance. Now, what I have
here is a spare piece of mahogany. is
obviously way harder than um plywood
that we have right here. So, I'm going
to try and engrave and cut this right
here. We see how it performs on a real
hardwood.
And yeah, that seriously worked like a
charm. That is cool. And it's really
easy to handle. Like everything worked
fine. The the tracing was good. Um as
far as I'm concerned, I don't have
anything to complain at this point. The
only thing is it's not too damn fast
when it comes to incraving. I mean, it's
a small machine. It is belt driven, so
it has its flaws. But for the price
point, that is nice.
Okay, let us see if it cut through. I
mean, we can clearly see the engraving.
I um put a speed of 20,000 mm per minute
this time around. And you can see that
the engraving was on the one hand
faster, not twice as fast as last one.
So I think we've reached the limit of
probably around 15,000 mm per minute.
I'm not very certain about the specs. Um
when it comes to the max speed, maybe
it's somewhere here in in an annotation,
but you can clearly see that with the
higher speed, we don't have such a deep
engraving. It's not this dark, but this
comes totally natural because it's only
a 10 watt engraving and laser modu in
general. So, let's see if we can
actually pop it out. I can already see
the outline of the
figure here. And it seems to have come
through. It's kind of a tight fit, but
hey, we we got it to work. I mean,
that's all that we really need. I like
that. That is cool. It worked out very
nice. It cut through mahogany. And this
right here, I would suppose it's also 3
mm thick.
Three and a half mm. So, it's even
thicker than the plywood that we had
before. Yeah, it's a tad bit thicker.
So, that is nice. It cut through the
hardwood, too. But now, here's kind of a
real challenge. This right here is
Canary wood. It's extremely brittle.
It's seriously hot. It's an annoying
wood to deal with. And even my 40 watt
laser engraver by IKEA just didn't make
it through on this sample. So, we are
going to try. It's not the same rabbit,
but but it gets the point across. We're
going to try to cut through it. We are
going to engrave it and see how it
performs. I'm going to take everything
way slower this time, especially when it
comes to the cutting. This right here is
5 mm thick. So, that's very thick for a
10 watt laser engraver. Let's just see
if it can deal with it. And if it can't,
that's totally fine. It has its limit.
Let's go.
[Music]
Well, shiver me tinders.
Already after the first pass of the
cutting, I noticed that I could see the
blue light of the diode laser down here,
the honeycomb pattern, which means it
has
proof.
I am
I am seriously surprised.
When I do reviews, I'm not manufacturing
my surprises or anything of that sort.
But this right here for a 10 watt laser
could be that it's a new thing or
something of that sort. It's it's a new
machine or I don't know. But this right
here is impressive. Half a cm thickness
of canary wood cut through.
Wow. Um that is amazing.
I did not believe that it could cut
through that. I I mean it when I say it.
I thought the 3 mm to 4 mm mahogany was
the maximum.
Now I'm wondering if it can cut ash too
or other hardwoods like for example a
masakoya or like I'm going to give this
some more shots over the weekend and I'm
going to tell you about the results
then.
Oh yeah, that is good. That is cool.
You're doing well little one. You're
doing well. Sh.
[Music]
Excuse the mess. I've been kind of busy
working here building a bunch more
furniture. But over the weekend and the
last few days, I was able to play around
with this machine a bit more. And I grew
really fond of it. I was able to do a
little sign at home for for um a
relative of my wife moving. So we used
it um this later in in Craraver to get
it done. Um that was cool. Worked out
very nicely with beach wood. So so
hardwood. But other than that, you have
probably seen in the other video that I
was um playing around with a little bit
more with other hardwoods. And this is
what I got. So this right here is ash.
And it's ash from right at the very
middle of a tree. This right here is the
hardwood. So, it's really, really hard.
It's about 4 mm thick. And by doing two
passes, I was able to pass through just
barely. So, this is to be expected. Even
my 40 watt lasers have a hard time
getting through edge. And this is why I
was kind of surprised once again that it
got through. One pass through my drum
sander and I'm going to get it out here.
You see, I can already break it out
pretty easily out of the rest of the
wood. Yeah, there we go. Worked out.
This is amazing. And it did a really
good job looking quite um quite tight.
Looks good. Other than that, I was
playing around with um a 5 to 6 mm thick
oak wood. Um this right here is white
oak and that was rather on the thick
side of things. So, so quite a bit
thicker than the ashwood that we got
here. And I did it on two passes. And it
only made it through on a few parts of
the of the oak wood here where it is
even a bit thicker. It just didn't make
it through entirely. So, I should have
done a third pass. And that's exactly
what I did. And I was able to finish up
with this small laser right here. A
product that I'm working on for my art
market. It's just 3D printing combined
with oak wood. Does look pretty good,
right? And it did a pretty clean job. If
you take a look at just everything here,
looks looks nice. There are a few
tolerances, but um this can be fixed
very easily with the version two of my
clock that I have here. So, it did a
really good job. It passed through the
oak and the thick ashwood. For 10 watt
laser, this is just awesome. I seriously
can't complain. So I want to play around
a tiny little bit more with this
machine. Now what I noticed, I didn't
even notice this when unboxing. This
right here is an infrared laser module.
This is why it's only one watt. Meaning
what we can do here is we can engrave
all kinds of metal. For example, steel
and aluminum and the like without any
problem. This is really cool. I didn't
know that this was included. This is
awesome. So I'm going to do this next.
I'm going to try to engrave metal. And
also I want to use this rotary module.
And once I'm done with that, I can give
you a final verdict of this little
machine right here. Um, and can tell you
what I learned in the last few days and
if you should buy it or not. And also, I
got slate here. This sadly fell down
from my little um shop that I have right
in in front of my house, my my little
booth. And this right here is the
engraving by a 40 W laser. And I want to
see how this engraving compares to the
10 watt laser that we got here. So,
let's not waste any further time. Let's
get to carving and cutting and see what
we can come up with in the next round of
testing. Let's go.
[Music]
[Music]
I mean, yeah, it works. The the picture
is inverted. I I did not tweak anything
and I just want to try it out and it was
just too high of a speed for the rotary
and for the oak. Um but other than that,
yeah, it looks good. It most definitely
works. It's just a standard roller that
you can just get in every store, be it X
tool or IKEA or whatever. It does work
out. So, I'm satisfied with that. I
suppose
this looks fabulous. Look at that. Very
high detail. You can see the difference
in colors. Um yeah, it's wonderful. The
text is extremely nicely visible and
readable. And there's no overall um
difference in quality when you compare
the 40 watt to the 10 watt. It's
awesome. I I like it. It does a really
good job for what it is.
When it comes to the diode laser, there
is no visible engraving
in this. I'm not fairly certain what it
is. I would suppose that this right here
is a small steel plate, but there's no
engraving in the metal whatsoever.
But if I'm not mistaken, if we use the
infrared laser, has been ages since I
have used one. And in a normal case, I
do not engrave metals. If you use the
infrared laser with 1,64
nanometers in wavelength, we should be
able to engrave the metal. We give it a
shot at least.
All right, perfect. Am I looking fresh?
Am I looking fresh? Um, for some reason,
and this was kind of weird, the machine
didn't register that there was a new
laser module plugged into here for the
first few seconds, but at some point it
started working. I have no idea what
happened. Maybe it just had to um get
started with everything, get warmed up a
tiny little bit, but after that, that
looks gorgeous. That is some fiber laser
going on here. Look at that. Can
you see that? Let me see if I can focus
it nicely. Engraved on metal. And with
an infrared laser, you can just like
with a fiber laser
do all kinds of metals, be it brass,
aluminum, steel. It just works
wonderfully. And it did so very nicely.
Obviously, it's just scoring the the
wood. There's nothing that you can feel.
It's it just feels very smooth, just
like the regular metal. I just like the
look of it. Um, with a diode laser, you
could actually also engrave metal with a
bit of fiddling around. And this also in
different colors depending on the
wavelength that you that you have right
now. But other than that, this I think
concludes all of the tests that I wanted
to do. I did a lot of things with this
tiny little laser here, and I would love
to tell you my final opinion about it.
Now the coverall laser engraver and
cutter is up until this point I think
the most inexpensive laser machine that
I have ever tried out. I dig into the
website once again and this little
machine which is extremely lightweight,
easy to set up, especially fast to set
up no matter where you are right now. Be
it going to an art market or just going
to a rel's house and showing them your
laser comes at a price tag of €226
which is around $250
which is for the area that that you have
the laser module and also the infrared
laser module that you are going to get
extra a totally fair price. And the best
thing is if you go onto their website
now, and this is nothing where I earn
any money or anything of that sort, you
can get yourself a 10% off coupon by
just registering for their newsletter,
which is cool. So, you get this machine
for around about $220 or €200 overall,
which is in my opinion, it's a steal. It
works accurately. The laser modules work
out fine once you get the infrared
module running. It also works perfectly
fine as you were able to see here. Now,
there's not much I could say negatively
about this machine. Most of the stuff is
just a tiny little bit nitpicky. At
first, I had my doubts that this would
work out without wiggling, but by
installing this bar right here, it was
able to just stay really, really stiff
for what it's supposed to do. There's no
wiggle room or anything of that sort. It
works accurately. Other than that, the
only negative thing I could really say
is that this infrared module took a
while to get started. And even though
it's really cool that you can screw the
honeycomb pattern into the space down
here, once you want to use the roller or
you want to increase something which is
a tiny little bit higher, you have to
unscrew the honeycomb board and just
screw those in. um those razors. To
their defense, you could use the razors
and screw the honeycomb pattern into the
razors, too. But it just takes a bit of
time to get set up. So, if you are on an
art market and you are in a hurry, I
wouldn't recommend engraving anything
that has a circular shape or the like um
or a cylindrical shape. But other than
that, those were my only complaints.
It's easy and quick to set up. It's a
lightweight machine. You can just take
it anywhere. It works wonderfully. The
laser modules that come with with the
machine do their job perfectly fine and
even more than they should be capable of
for a 10 watt machine if I may say so
myself. I was honestly surprised about
what it could cut at this capacity.
And other than that it it it just looks
fine. Looks really good. It's it's
pretty well built for the price and for
the price tag that I have mentioned
before. It's just a real steal and you
should check it out by using down there
any link that they have sent me that I
should put down there in the
description. I'm not earning any money
from it. Um I'm not certain if I can
take part in any program, but if I do
so, you will see down there in the
description. And if you decide to buy
any of their machines that I'm going to
get a little cut of the cake. So, do not
worry, you're not going to pay extra. Um
the most you could do is support my
channel passively. But if you want to
get started into the laser business, you
should get this machine. It's not
something that you would use regularly
when doing a lot of laser work that you
want to sell because it's not the
fastest machine overall. Obviously, it's
just 200 bucks basically. But it gets
the job done in a hobbyist kind of
fashion. And I can appreciate this
because lasers like this are the reason
why I could get started into woodworking
and and all the things that I'm doing
right now. And if you also want to get
started with this stuff, it's a perfect
starting point to get yourself a small,
inexpensive laser that actually can get
the job done. And this is my final
conclusion. 6 out of nine. No, there's
no real scale here, but if I could
recommend anything, this right here is a
good inexpensive machine for beginners
in the hobbyist space or just someone
who wants to get started with lasers.
And I hope you did enjoy my review and I
tried to make it as thorough and
complete as I could possibly do. If you
have more questions, leave some comments
down there below and I'm going to see
you in the next video. Have a flammable
day. See you.
Hey everybody.