Shooting a Back Bar for the First Time | Is it Worth it?

The Technology of Old Crossbows
4 followers
1 Video View·Sep 20, 2025
Shooting a Back Bar for the First Time | Is it Worth it?
What's up everyone?
Welcome back to the channel.
Today we are going to install a 10-inch Ramrods Wraith back bar on my PSE Stealth Mach 1 Carbon.
I've been running the 12-inch Ramrods Wraith for a little while now and I like it.
No complaints.
So I'm going to add the back bar in since I've never shot it before and Travis tells
me it's a game changer for balance, especially when you're running a quiver on the hunting
setup.
So we're going to head into Willow Creek and get it installed.
So you have to take this out and extend it or put a disconnect on it.
It's up to you.
Let's put the disconnect on there.
Yeah, let's spend more money.
Do you want it 10 degree or straight?
Whatever you suggest.
I can't be an expert at everything so.
We'll go straight since you're just starting off.
So Brett's recommending that I run a quick disconnect so that I can actually line this
thing up correctly.
It has nothing to do with buying more ----.
I was not upsold at all.
Yes you were.
So we still got to change, so see this has to go the same as your stabilizer.
So we are going to go with a longer one of these.
This is why I never run a back bar.
This is confusing.
The front bar, you just screw it in, good to go.
Back bar, I need disconnect now.
I need spider archery thingy bob.
If I don't shoot X's after this, I'm going to be pissed.
So ideally what we want is your bar to go out the side like this.
At a full 90?
Yeah.
Okay, so that's where we want it to be.
So now your quick disconnect, you got the half moon there so that's going to match the
radius.
So you always want it on top like that.
Got it.
Your back bar now, put the quick disconnect on that.
Same thing, you got the little radius, that's going to go on top, put it in like that.
Okay, so now you just need to, this will be something you're going to play with to see
where you like the balance.
Okay.
And then you can tie it down.
It has numbers.
And do it with the quiver obviously because that's what I'll be hunting.
Okay.
I can just dial it in.
So right now it's like this and you can say, you know what, it's kind of still wanting
to fall this way.
Move that out a little bit or you can rotate it down a little bit.
So this screw here is going to be, you're up and down.
Got it.
Okay, and you got a pointer here telling you what degree you're at right now.
So you can kind of play if you want to just try a few degrees at a time.
Okay.
Okay, and the same on the bottom here so you can have this like straight back like this
or I know you want to run it straight out 90 but I wouldn't recommend that because people
are going to laugh at you.
Like a handlebar?
Yeah.
Ramrods is coming out with a quick disconnect and back bar bracket so stay tuned.
Good.
I'm checking the quiver on.
And I bet it pulls out just right.
That feels pretty good.
Basically just level.
You're trying to keep the bow not wanting to move when you shoot, like fall to one side.
Yep.
Or fall back or fall forward.
You just want to kind of sit there.
It does feel pretty good right away.
It's going to be different at full draw too.
Yeah.
Well, and on the release.
It's all about the shot so shoot it and see how it feels.
Okay.
If it feels like it's going somewhere, that's when you start moving this around to stop
that movement.
All right, I'm going to take the first shot here with the back bar.
It's weird having the bar right there though when it goes down.
Try another one.
It's pretty straight.
The only thing I can't get used to right now is this hits my arm.
All right.
Made a little adjustment to the bar, back bar.
Let's see how it goes now.
Basically moved it down out of the way of my arm.
A little better.
It didn't hit my elbow right off the bat.
Definitely got to get used to that back bar.
But according to the bubble, it's centered when I'm at full draw.
So that's nice.
Just got to get some shots through it and get used to it now.
All right.
I've taken about six shots so far with the back bar.
I'm starting to get a little more used to it.
So now I'm going to kind of focus on just going through all my movements in the process
and just focus on trying to make some good shots here.
You notice less of a pin float?
Definitely less pin float.
Yeah.
When I'm at full draw, the stability is pretty much like rock steady.
The left to right, it doesn't want to lean.
I don't have to correct for it as much with my hand.
Imagine how much more accurate you're going to be at longer distance with a little bit of movement.
Makes that much more of a difference.
Yeah, so much more downrange.
Leave this on and I'll go in the yard at home and I'll put some shots through it.
Just put my reps in, try to get used to the added weight.
Get used to the back bar in general and having it there.
All right.
So just got done shooting the back bar in the backyard and everything is feeling great.
Had it installed today.
That was my first impressions.
Shots are starting to hit on target.
There's definitely less lean running the quiver on there with a full set of arrows.
So I'm looking forward to getting some more shots through it and putting it to the test this weekend on the hunt.
Don't forget to let us know in the comments what you guys are running.
Do you prefer to run the back bar?
Do you just run the front bar?
Why or why not?
And don't forget to like and subscribe.
We really appreciate it and we'll see you in the next video.
