How Long Should I Cut My Arrows? - Safety and Practicality

The Technology of Old Crossbows
4 followers
1 Video View·Oct 19, 2025
How Long Should I Cut My Arrows? - Safety and Practicality
Comments are disabled for this video.
A really important question we get asked is,
what length should I cut my arrows based on my draw length?
And I want you to cut your arrows based on safety,
not necessarily on draw length.
And the reason why is because most manufacturers
are supposed to measure their draw length
based on the industry standard.
However, the industry standard has a plus or minus variation,
a margin of error built in
that a lot of manufacturers error to the side
of the longest they're allowed
in order to measure a draw length and advertise it.
And what I mean by that is some companies,
even though technically it's a 29 inch cam,
because they're allowed to get close to a half inch
over that draw length and still be able to advertise it,
they're pushing the envelopes
and they're making their 29 and a half
dang near a 30 inch bow
just so they can get that extra five or six feet a second
and be able to advertise something that's a little faster
than maybe a competitive brand.
So because of the margin of error in draw length,
I want you to err on the side of safety first.
And what I look for is when I'm at full draw,
I want this broadhead to be at the front of the riser
in the front of my hand.
This is gonna be important because if you cut this
to where it's coming much further back
and it's almost back here by the arrow rest fingers
or the prongs, then what happens is
if you ever accidentally get a knock
that comes off the string or something
and this arrow falls forward, it can get bound up here
and it is an accident waiting to happen.
If you keep your arrows to where they're at the front edge
of the riser like this,
and you did have one accidentally come off,
at least it's sliding forward
and it's already in front of that riser.
So that's a really important thing to keep in mind.
Super easy to do, draw your bow back with an arrow,
have someone mark it at the front of the riser
and that's where you're gonna have that cut length.
We measure our cut lengths from the end of a stock knock
to that cut length.
Now, the other thing to keep in mind
is if you have a mechanical broadhead,
a lot of the mechanical heads,
especially rear deploying ones,
are gonna have a bit of blade overhang
past the connection point of the ferrule and the shaft cut.
So in this case, you can see there's a slight overhang.
So if I cut this really close to the fingers,
I'm gonna end up having a problem
and if I'm shooting a pull through release
where I've cut this to where those blades
are almost at the prongs
and now I'm gonna keep pulling,
those blades could contact the prongs
and inadvertently pull the arrow off the string.
So you don't wanna have that happen
and the other thing you've gotta factor in too
is if you're gonna shoot like ours comes standard
with the match grade hit collars,
if you're gonna have a collar to go over that shaft
to add in some durability,
then you need to realize that that is a bit of an extra space
that you need to plan for in your cut
and by cutting at the front of the riser,
you're gonna make sure that you factor in
those margins of error.
Now my target bows where I don't have a broadhead,
do I cut my arrow a little bit further back?
I do and I'm looking to try to maximize my wind drift,
I'm trying to maximize every foot per second
I can get out of those target bows
but again, I'm not worrying about safety.
So don't think about your draw length so much
is think about the safety,
making sure you cut that arrow shaft
at the front of the riser
so that your broadhead can be in a safe place
in front of your knuckles.
