Ceiling Fans in my House 9/18/2025

TV Electric Fan
2 followers
23 Video Views·Sep 20, 2025
A showing of the ceiling fans currently installed in my house as of Ceiling Fans Day 2025.
Hello viewers, today we're going to take a look at the ceiling fans,
currently installed in my house as of 9-18-2025, which is ceiling fan day.
It's a beautiful day for it too. It's very sunny and warm. It is 83 over 46. Perfect summer day.
Sunny, strong, beautiful out. Very unusual weather patterns this year.
It should be considerably cooler by now. It cooled off towards the end of August. It got
very cold at the beginning of September and then it's warmed back up the last week or two. It's
been quite nice, which is neat because it was a very short summer. So anyways, here in the kitchen
we have a Casablanca Panama. I am going to be swapping this one out,
actually possibly today, but I'll do a video of this installed here before I
change it out. This is one that I custom built new controls for.
Very nice fan. It looks pretty nice in here. Finally have lights back in the kitchen so we
can actually see the fan today. And there's the Crest in the background. That should be a good
thumbnail. There's that one. And no, none of them are on. It's not hot today. I suppose I could have
turned them all on, but oh well. This is the Crest 8600. This is one of the most sought after fans in
my collection. In particular the polished brass version with the smaller canopy and the factory
light. I have acquired what I believe is the same version that my aunt and uncle had in the kitchen
except it's in antique brass. So the search for the polished brass one continues.
Very nice fan. Here in the living room we have kind of an unusual install.
This is a Dayton 56 inch 3-speed commercial ceiling fan. I have very mixed feelings about
this installation but it definitely works cosmetically and it's very very powerful too.
Hopefully we'll have ceiling fans in the hallway soon. That's a very near project.
Here in the media room we have a super branded ceiling fan. It's a 42 inch
polished brass from the early 2000s. This is from the Canada. That's why there's the three
chains. Another very nice fan. I have a lot of really nice looking fans installed right now.
Which I guess you know would be logical enough I would install ugly fans. Here in the bedroom
is a Hampton Bay Huntington whatever the number is in polished brass. Another very nice fan. I
want to put this in the living room at some point. This one is also due to be changed out soon.
I just really like this one so I haven't gotten around doing it and pushing it off.
But if I don't swap it out with something else I'm not going to get around to enjoying
all the fans in my collection. In the computer room we have a Crest 5500
which I've taken much more liking to since the installation. Not that I didn't like it
originally but I guess I was just so perturbed by the stupid switch housing that I was kind of
bothered by the thing. But I like it now. Very nice fan in excellent condition.
It's getting more difficult to find the... Did something just smack the window?
It's getting very difficult to find polished brass fans with the polished brass still in
good shape. And this one is cosmetically flawless which is kind of remarkable at this point.
And by the doorway we have a... I think it was a Hitech branded little 30 inch hugger.
This one I don't know how often I'm going to be able to swap this out because there's not much
else that fits here. Not necessarily a clearance issue in terms of width. Actually it might be.
This is 30. Yeah 36 will not fit there. So you have to do 32 or smaller and then you need the
clearance from the door. So you're kind of bound to the huggers. Actually I do have a few I could
put there probably. I have one of those I think it's a Mainstay branded multi-colored ones. That
would probably fit. Maybe a Minuet too. A flush mount that would fit. So there's some options I
guess. We're going to be adding a lot more fans downstairs hopefully soon. This is what's going
to be going in the hallway. Two of these. These are Craftmade Peclos in I think it's oil rubber
bronze with medium oak blades. In the testing area we currently have a Dayton 36 inch. Another
ridiculously powerful fan. And we have the Hampton Bay Windward in the polished brass.
This is another one that's kind of hard to swap out because this area requires very low clearance.
If I walk underneath this my head scrapes the end of the fob there. So we don't have much
clearance to work with. This one I think it's only on a two inch rod and it's mounted
directly on the ceiling. We could potentially put... I'm gonna get stupid comments. Oh it's
mounted directly to the ceiling. Duh! Everyone is. I meant it's not mounted to the beam. It's
to the upstairs floor. I might be able to put a flush mount here if I drop the box down an inch
or two. But there's just there's very very little clearance to work with here. So only certain fans
will fit and probably nothing with a light would fit here. But this looks nice and it's pretty
powerful. So this this works well for here. We'll try something else eventually. And now
on the other side I eventually want to get 30 inch huggers all along here. I'm not sure if
we could do something here or not. Maybe. And then we'll definitely get more in here.
The light bulb is burnt out. I gotta change that still.
Eventually we're gonna have... and this might be actually coming up soon.
One, two, three, maybe four if I can fit them. But for now we have the... this hasn't changed
since I put this up. We have the Hampton Bay 42 inch. Actually these might be plugged in.
That's that's kind of convenient. We have a Hampton Bay 42 inch hugger in antique brass.
We have a Hunter Passport, which I didn't realize I actually acquired three of these. So now I can
do a triple install in the kitchen. And we have a Hampton Bay Landmark in antique brass. And lastly
here in the garage we have two Envirofan VNs. I forget what the model number is on these.
That's just a stinking... some kind of warning. There we go. Hopefully that was visible. If not
I'll put it in the video box. And there's this one and then this one over here. When I put these in
I for some reason just felt like this was never going to change. But there's no reason that it
can't. And this room is climate controlled. A regular basic fan could go in here and not have
any concerns of getting ruined. There is kind of the same problem in here as there is downstairs
in the sense that it's low clearance. But it's not as bad. We probably have about...
I would say maybe down that much of clearance that we could go. I'd say about 15-16 inches to
the bottom of the fan. So it's definitely still limited. But there's more we could do here than
downstairs. Although on the contrary to downstairs these beams are very narrow and I don't think that
a flush mount fan would fit in there. Like the motor would be too wide.
Might be able to get away with the flush mount mounted directly to the beam like this is.
This is okay. And the light. Yeah I could probably put a globe on this and it would be okay.
So I guess we probably could do some different setups in here. We'll see.
But there's this one too. This is a... is this a crest actually? I'm not sure.
It is a crest. There's a lot of crests in the house right now. Another crest.
Well that's all the ceiling fans currently installed. We'll be installing more in new
locations soon. And we'll be swapping some of them out this month. It's a beautiful ceiling
fan day today. We've got to be getting towards the end of the nice weather. This is unseasonably
warm for today. And in fact it's it's kind of windy and not that hot. We don't even need the
fans today. Just open up the windows and enjoy the nice natural breeze coming through.
