DISCLAIMERS* This video is for entertainment purposes only. It is NOT an instructional video.
This video and/or description contains affiliate links, which means that if you click on one of the product links, we may receive a small commission at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
All right, I just swapped out my first gen
elicity battery box with this new gen battery box.
Got it all plugged in.
Got my yellow Anderson plug there.
That's plugged into my solar right there.
And then the gray one is plugged into my DC fuse box.
And then I've got my power right there.
So now what I want to do is I need to take this plate off
and drill a hole that goes through so I can attach this to my ground rod.
I got a ground rod that I want to put into the ground.
So that's what I'm going to be working on today.
So let me get to it.
All right, hopefully that made it all the way through.
Let's go check that out.
Yep, came through right there.
So that's where I need to put my ground rod.
I'm hoping I can get this all the way down without hitting granite.
All right, that wasn't too bad.
Got it all the way in.
Got lucky I didn't hit any granite.
So I need to feed my wire through and get it all connected up.
Got a whole flock of turkeys out here.
So four, five, six, seven, eight, nine.
Big old tom over there.
Yep, they see me and they're not concerned.
It's pretty cool.
I had seven deer out here this morning, but I didn't have the camera with me.
So
All right, got that ground rod in.
Now it's tied into my electrical system.
And it's a ground rod that's meant for generators.
So I wanted to have my solar generator grounded.
So now it is.
I don't know if that's needed, but I wanted to do it anyway.
Just to keep those from flopping around.
I might add one more right there.
Okay, before I put the ground rod in,
when I would plug something into these plugs, I'd get a little spark.
But no spark now.
So that was exactly what I needed.